ReadyLift 2.25″ Front Leveling Kit W/ Control Arms – GM 1500 Truck / SUV 6-Lug 2017-2018

ReadyLift 2.25" Front Leveling Kit W/ Control Arms – GM 1500 Truck / SUV 6-Lug 2017-2018

Part Number: 66-3086

ReadyLift 2.25" Front Leveling Kit W/ Control Arms – GM 1500 Truck / SUV 6-Lug 2017-2018 is ReadyLift part 66-3086 for 2014-2018 Chevy/GMC 1500 with 2.25 inch lift specs.

Features and Benefits

• Max Lift 2.25"
• Max Tire Diameter 33" Will work on 2014-18 Silverado/Sierra 1500 Best quality, best design for the proper leveling lift on new body style GM 1500 trucks CNC machined aircraft…
• Vehicles equipped with Magnetic Ride Control will require re-calibration.
• 1/2' wheel spacers may be required when using 285 or larger tire on the factory wheels.
• **For use on 2017-UP models w/ stamped steel upper control arms.** Before purchasing
• What Control Arms Does Your Truck Have?

Fitment

What’s Included

• CNC machined billet aluminum leveling kit
• DOM tube steel upper control arms with heavy duty ball joints
• Maintenance free pivot bushings

Tire and Wheel Fitment

• 33" Maximum tire diameter
• 33×11.50 for no rub on a 9" wide wheel with +12 offset
• 18" – 295/65R18
• 20" – 285/60R20
• 22" – 285/50R22
• Wheel spacers may be required with factory wheels
• Tire Size Note: ReadyLIFT wheel and tire fitment recommendations are typically based on Wheel Pros wheels and Nitto tires. Due to product differences among tire manufacturers, tire specifications and dimensions including, but limited to, overall diameter…

Important Notes

• Note: This kit is for use only with GM 1500 trucks with Stamped steel or aluminum control arm suspension.
• NOTE: Check factory height prior to ordering or installing. Trucks with more than 22" of wheel hub to fender lip height may require less lift.
• Note: This kit is for use only with GM 1500 trucks with Stamped steel or aluminum control arm suspension. Not for use with cast steel suspension. What control arms do I have? Read this to learn more
• NOTE: To ensure proper leveling kit fitment, using a plumb bob line (for a clean vertical) to measure from the center of the wheel hub to the bottom edge of the fender at the 12 o‚¬„clock position while the wheels are pointing straight forward. If this measurement is greater than 22‚¬„‚¬„ then…

Installation

Download Pdf Instructions