HaloLifts ABC Bilstein Adjustable 1-3″ Lift Leveling Kit For 2014-2020 Ford F-150
HaloLifts ABC Bilstein Adjustable 1-3″ Lift Leveling Kit For 2014, 2015, 2016, 2017, 2018, 2019, 2020 Ford F-150
This Bilstein 5100 Adjustable Leveling Shock Kit includes all the components you need to level your truck or SUV with a front OE coilover style suspension. This kit provides the adjustability of 1-3 inches of lift with HaloLifts top mount, threaded sleeve, and 700lb spring. The Bilstein monotube shock absorbers are comprised of a 46mm digressive piston with a self-adjusting deflective disc valve setting.
This leveling kit increases wheel clearance, improves performance, and decreases body roll. These will also accommodate rear blocks from stock to 3 inches.
This kit comes with 2 sets of U-Bolts and 2 Rear Blocks available in 2.0”, 2.25”, 2.5”, or Raptor style 2 ¾” to 2 5/8” tapered.
These kits are built to fit your Ford F150 2004 to current! SPC – Specialty Performance Company forged UCA’s and factory pressed in frame mount bushings. The ball joint is booted, it is grease-able, cam style adjustment to achieve alignment specs.
*Note the rear shocks need to installed BOOTS down*
Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC’s adjustable front upper control arms. Featuring an upgraded greaseable ball joint and rubber isolated xAxis™ bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC’s fully forged steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs.
- Get more droop travel: SPC’s arm has improved clearance to get around the spring bucket. With 80° of articulation in the upgraded ball joint and free pivoting cross axis bushings, SPC’s arm gives you maximum droop travel.
- Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC’s arms have +1° of caster built into them. Using its patented ball joint design the arm will get you ±2° of caster and ±2° of camber, so you can put your alignment angles back to specification.
- Get your tire where you want it in the wheel well: Use adjustment in the SPC arm and on the OE lower arm to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming.
- Adjustment range: Camber ±2.0°
Questions and answers of the customers
what is the preset lift height on the front coilovers?
Q what is the preset lift height on the front coilovers? answer nowA At 2 inches But you can always adjust the height by turning the nut on the thread
Im looking at HALOLIFTS ABC BILSTEIN ADJUSTABLE 1-3″ LIFT LEVELING KIT FOR 2014-2020 FORD F-150. The kit comes with 700lbs spring. Other manufacturers use 550lbs. Will your springs make my 2020 F-150 ride like a brick? Also anything higher than 2.5" in the fronts puts wear on the front boots. Is this really an issue?
- I currently have a 2" stock rake. What size rear block should I order for a 1/2 - 1" rake after installation? (2016 Ford F150 XLT 4WD 5.0 SCREW)
- So does this just lift the front end or does it lift back as well?
Q So does this just lift the front end or does it lift back as well?There are no answers for this question yet. Answer now
Good afternoon my name is Dave Fiedler I am interested in purchasing a halo coil over system and I’m not really sure which one I should be buying my truck is primarily only gonna be for the street and I’m looking at ABC Bilstein System that you have my truck is a 2020 Ford F150 XLT 4x4 with a 5.0 i’m only looking for a 2 1/2 inch lift in the front thank you so much for your time and your help I hope that you and your family had a wonderful holidays
Q Good afternoon my name is Dave Fiedler I am interested in purchasing a halo coil over system and ...... Read more answer nowA front coilovers are height adjustable and can be adjusted to 2.5'' or you can order height-adjustable Bilstein shocks https://www.suspensionlifts.com/shop/ford/f150/2015-2016-ford-f150/2015-2018-f150-shocks/bilstein-0-2-front-adjustable-lift-shocks-2015-2017-ford-f-150-4wd/ https://www.suspensionlifts.com/shop/ford/f150/2015-2016-ford-f150/2015-2018-f150-shocks/bilstein-0-2-front-0-1-rear-lift-shocks-2015-2017-ford-f-150-4wd/ https://www.suspensionlifts.com/shop/ford/f150/2015-2016-ford-f150/2015-2018-f150-shocks/bilstein-6112-0-2-front-lift-coils-shocks-2015-2017-ford-f-150-4wd/ https://www.suspensionlifts.com/shop/ford/f150/2015-2016-ford-f150/2015-2018-f150-shocks/bilstein-0-2-lift-6112-front-coils-shocks-and-5160-rear-shocks-for-2015-2019-ford-f-150-4wd/
Does this kit lift the truck higher than stock height??
Q Does this kit lift the truck higher than stock height?? answer nowA yes 1-3'' higher
Is this a Bilstein product? Part: HABCMP
Is there any warranty associated with this product?
Q Is this a Bilstein product? Part: HABCMP Is there any warranty associated with this product? answer nowA HaloLifts warranty comes with the kit
Hello, I am interested in this lift Sku# HABCMP_N2. Will this lift work on a 2017 Ford F150 4wd FX4, 3.5 Ecoboost truck?