ReadyLift 4″ COIL SPRING SUSPENSION SYSTEM WITH FALCON 2.1 SHOCKS – FORD SUPER DUTY DIESEL 4WD 2023-2026 F-350 And F-250

ReadyLift 4" COIL SPRING SUSPENSION SYSTEM WITH FALCON 2.1 SHOCKS – FORD SUPER DUTY DIESEL 4WD 2023-2026 F-350 And F-250

Part Number: 63-23440

ReadyLift 4" COIL SPRING SUSPENSION SYSTEM WITH FALCON 2.1 SHOCKS – FORD SUPER DUTY DIESEL 4WD 2023-2026 F-350 And F-250 is ReadyLift part 63-23440 for 2023-2026 Ford F-350/F-250 2WD/4WD.

Features and Benefits

• – Fits 2023-UP Ford Super Duty Power Stroke 4WD.
• – 4" Coil Spring Suspension System
• Vehicle-specific performance-tuned Falcon 2.1 monotube dampers on all four corners.
• – Rear adjustable 3-position Falcon 2.1 shocks tune for daily, sport, or work duties.
• – Radius Arm Drops for correct caster angle in kit.
• – Bolt-on lift kit

Fitment

What’s Included

• 4" Lift Springs
• Falcon 2.1 Monotube Front and Piggyback Rear Shocks
• Track Bar Relocation Bracket
• Radius Arm Drops
• Sway Bar Drops
• Bump Stop Extensions
• Carrier Bearing Drop
• Front Brake Line Brackets
• Fabricated Rear Lift Blocks
• Hardware Pack

Tire and Wheel Fitment

• Recommended tire size: 37" – 12.5"
• Recommended wheel: 17" and up x 9" wide, +25 offset / 6" backspacing (minor trimming of the front valance may be necessary)
• Tire Size Note: ReadyLIFT wheel and tire fitment recommendations are typically based on Wheel Pros wheels and Nitto tires. Due to product differences among tire manufacturers, tire specifications and dimensions including, but limited to, overall diameter…
• Ride Quality Note: When lifting a vehicle and installing aftermarket wheels and tires, a tire manufacturer's construction and material quality can alter vehicle ride quality. When increasing a vehicle wheel and tire size, most larger aftermarket truck and…

Important Notes

• NOTE: Tremor versions will not gain the full 4 inches over stock ride height. Not recommended for 2WD or gas trucks. Single Cab configuration has not been validated for fitment & drivability by ReadyLIFT. New auto headlight brackets are only for stock radius Arms.
• NOTE: Tremor versions will not gain the full 4 inches over stock ride height. Kits designed for diesel applications only. Not recommended for 2WD or gas trucks. Single Cab configuration has not been validated for fitment & drivability by ReadyLIFT.

Installation

Download Pdf Instructions