Zone Offroad 3″ Coil Springs Lift Kit 1984-2001 Jeep XJ

SKU: J6N/J7N
5 out of 5 based on 1 customer rating
(1 customer review)
Sale!

Description

Zone Offroad 3″ Coil Springs Lift Kit 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Jeep XJ

Part: J6N/J7N

New front coil springs are supplied with this 3″ XJ lift kit that are capable of handling anything! Since Zone Offroad Products design their coil springs for off road use, there is no need for bump stop extensions. Zone coils can be smashed to the bottom and will always come back! No, that doesn’t mean they are stiff. The key is using the correct size wire with the correct spring rate to offer the perfect ride and still hold up over time. Unlike many inexpensive kits on the market, our springs are made in the USA.

The rear is lifted via a new long add-a-leaf that’s been designed and tested to hold up over the long haul without creating a harsh ride. Unlike many companies (we all know who they are), our system comes with New rear u-bolts You never want to re-use a u-bolt!

New Zone shocks are included in the kit that are valved specifically for the XJ.

The Zone Offroad J6 3″ suspension lift kit fits 1984 – 2001 Jeep Cherokee XJ’s w/ Chrysler 8.25 Rear Axle. The J7 kit fits 1984 – 2001 Jeep Cherokee XJ’s w/ Dana 35 Rear Axle. Make sure to make the correct axle selection before adding this kit to your cart.

Featured Technology & Benefits

  • Front coil springs designed to give a full 3″ of lift while maintaining an O.E. style ride
  • No bump stops are included because our springs are designed for extreme travel.
  • Long, thin add-a-leafs for the rear that offer a smooth ride as well as hold up over time
  • New rear U-bolts are included with high nuts and washers
  • New front and rear shocks are included that are valved specifically for your XJ

Important Notes!

  • The XJ was produced with different possible rear axles. You will have to identify your rear axle before being able to complete an order. The easiest way to tell the difference is to measure the I.D. of your rear u-bolts. The Chrysler 8.25 rear axle uses a 3″ I.D. u-bolt and the Dana 35 rear axle requires a 2-3/4″ I.D. u-bolt.
  • Though not always required, optional 1″ transfer case drop kit (J5006) recommended when using stock driveline.

This product fits the following applications:

  • 1984 Jeep Cherokee XJ w/ Chrysler 8.25 4WD Gas
  • 1985 Jeep Cherokee XJ w/ Chrysler 8.25 4WD Gas
  • 1986 Jeep Cherokee XJ w/ Chrysler 8.25 4WD Gas
  • 1987 Jeep Cherokee XJ w/ Chrysler 8.25 4WD Gas
  • 1988 Jeep Cherokee XJ w/ Chrysler 8.25 4WD Gas
  • 1989 Jeep Cherokee XJ w/ Chrysler 8.25 4WD Gas
  • 1990 Jeep Cherokee XJ w/ Chrysler 8.25 4WD Gas
  • 1991 Jeep Cherokee XJ w/ Chrysler 8.25 4WD Gas
  • 1992 Jeep Cherokee XJ w/ Chrysler 8.25 4WD Gas
  • 1993 Jeep Cherokee XJ w/ Chrysler 8.25 4WD Gas
  • 1994 Jeep Cherokee XJ w/ Chrysler 8.25 4WD Gas
  • 1995 Jeep Cherokee XJ w/ Chrysler 8.25 4WD Gas
  • 1996 Jeep Cherokee XJ w/ Chrysler 8.25 4WD Gas
  • 1997 Jeep Cherokee XJ w/ Chrysler 8.25 4WD Gas
  • 1998 Jeep Cherokee XJ w/ Chrysler 8.25 4WD Gas
  • 1999 Jeep Cherokee XJ w/ Chrysler 8.25 4WD Gas
  • 2000 Jeep Cherokee XJ w/ Chrysler 8.25 4WD Gas
  • 2001 Jeep Cherokee XJ w/ Chrysler 8.25 4WD Gas
  • 1984 Jeep Cherokee XJ w/ Dana 35 4WD Gas
  • 1985 Jeep Cherokee XJ w/ Dana 35 4WD Gas
  • 1986 Jeep Cherokee XJ w/ Dana 35 4WD Gas
  • 1987 Jeep Cherokee XJ w/ Dana 35 4WD Gas
  • 1988 Jeep Cherokee XJ w/ Dana 35 4WD Gas
  • 1989 Jeep Cherokee XJ w/ Dana 35 4WD Gas
  • 1990 Jeep Cherokee XJ w/ Dana 35 4WD Gas
  • 1991 Jeep Cherokee XJ w/ Dana 35 4WD Gas
  • 1992 Jeep Cherokee XJ w/ Dana 35 4WD Gas
  • 1993 Jeep Cherokee XJ w/ Dana 35 4WD Gas
  • 1994 Jeep Cherokee XJ w/ Dana 35 4WD Gas
  • 1995 Jeep Cherokee XJ w/ Dana 35 4WD Gas
  • 1996 Jeep Cherokee XJ w/ Dana 35 4WD Gas
  • 1997 Jeep Cherokee XJ w/ Dana 35 4WD Gas
  • 1998 Jeep Cherokee XJ w/ Dana 35 4WD Gas
  • 1999 Jeep Cherokee XJ w/ Dana 35 4WD Gas
  • 2000 Jeep Cherokee XJ w/ Dana 35 4WD Gas
  • 2001 Jeep Cherokee XJ w/ Dana 35 4WD Gas

Quick Specs

  • Front Lift Height: 3″
  • Front Lift Method: Coil Springs
  • Rear Lift Height: 2 1/2″
  • Rear Lift Method: Add-A-Leafs
  • Install Time Hrs: 5
  • Difficulty Level 1-5: 3
  • Wheel Size: 15″ x 8″
  • Back Spacing: 3.5″-4″
  • Max Tire Size: 31″ x 10.50″

Customer reviews

Rated 5 out of 5 stars
1 review
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

1 review for Zone Offroad 3″ Coil Springs Lift Kit 1984-2001 Jeep XJ

Add a review

Use one of the allowed file type: jpg,png,jpeg.

    Questions and answers of the customers

      Do the shocks come with a rubber or neoprene boot to cover the shock rod. If not does the shock upgrade provide them?
    1. 0 votes
      Q Do the shocks come with a rubber or neoprene boot to cover the shock rod. If not does the shock u...... Read more answer now
      A We can add black, red, blue or yellow boots for $3.50 each boot. Please let us know how many boots do you need and we'll send you an invoice
    2. Will the a fit a 90 Jeep wagoner limited
    3. 0 votes
      Q Will the a fit a 90 Jeep wagoner limited answer now
      A Unfortunatelly no. We can offer only blocks and shackles for Wagoneer

    Send me a notification for each new answer.

    -

    Base Price: $331.43

    8 left in stock

    8 left in stock

    2-5 Day Transit Time

      Add JKS Manufacturing J-FLEX Adjustable Lower Control Arms for the ultimate control arm upgrade on your Zone equipped XJ: -Adjustable arm design utilizing a forged adjustable flex end and jam nut. -Forged end is fully rebuildable and greaseable. -1"-14 threads provide ultimate strength and fine-tune adjustability. -Factory style rubber bushings at the non-adjustable ends for quite, maintenance-free operation. -CNC formed for proper tire, frame and axle mount clearance. -Compatible with 0 to 6.0 in. suspension lifts using OE attachment points. (Zone lower control arms are still included (where applicable) when J-Flex arms are added)