ICON 2.5″ Lift Kit For 2018-2019 Jeep Wrangler JL (Stage 1)

SKU: K22011


ICON 2.5″ Lift Kit For 2018, 2019 Jeep Wrangler JL (Stage 1)

Part: K22011

ICON Vehicle Dynamics is excited to provide a sneak-peek into the development of a 2.5” suspension system for the new 2018 Jeep Wrangler JL. Aimed at drastically improving (not just maintaining) on and off-road ride quality this system includes dual rate coil springs, 2.0 Aluminum Series shocks, link arms, front and rear bump stops, sway bar end links, and all necessary hardware for a complete install. The JL is a much more “refined” vehicle compared to previous Wranglers, and with improved suspension geometry and more robust components this new Jeep sees significant performance gains with the introduction of ICON suspension products.

Through an accelerated testing process dubbed the “ICON1K” R&D program, ICON has logged over a thousand miles in the dirt pushing the JL to off-road extremes to identify limiting factors in OE components, develop products that remove these limits, and further extrapolate performance out of this vehicle. This 2.5” suspension system has been tweaked, tuned, and revised several times over the course of this ICON1K testing in an effort to provide unparalleled ride quality and vehicle dynamics for everything from rock crawling to high-speed desert running. By removing the aforementioned “limiting factors” this ICON suspension system completely redefines the potential of the 2018-UP Jeep JL with wheel travel gains over 30%!

This ICON Vehicle Dynamics 2.5” suspension system will allow for the use of a 35” tire, while ICON Alloys offers wheels in both a 4.5” and 4.75” backspace that provides ideal fitment for the varying axle widths found on Rubicon and non-Rubicon models. For those who are looking to install a 37” tire, ICON will be offering a bump stop spacer kit that allows for this as well. Additional ICON JL components are currently in development, so be sure to keep your eyes out for an official release on the COMPLETE 2.5″ suspension system lineup in the coming weeks!

Holistic Engineering – the ICON Difference
When developing suspension components for a new vehicle, ICON takes a different approach than many others. Rather than focusing in on one particular part, ICON engineers look at the vehicle as a whole, identify inherent strengths and weaknesses, and set a target for performance. With a focus on maximizing wheel travel and improving ride quality, ICON will develop components that address (and often times replace) OE limiting factors. This “holistic engineering” philosophy often results in the development of several parts designed to work together as a system to provide a balanced on and off-road performance upgrade. Because ICON is designing and manufacturing all of the components necessary to improve the performance of a vehicle from front to back, end-users can rest easy knowing they are dealing with ONE manufacturer, ONE standard of quality, and ONE awesome warranty to back it all up.

ICON Vehicle Dynamics products are proudly designed, manufactured, and assembled in Riverside, California by a team of passionate off-road enthusiasts. With a reputation for quality, performance, and service it’s clear that ICON Vehicle Dynamics is the top choice for performance suspension systems and shock absorbers for the new Jeep Wrangler JL.


  • 2.5″ lift height
  • Fits 35″ tires (37″ with bump stop spacer kit)
  • 3″ front, 2″ rear increase in wheel travel
  • Improves on and off-road ride quality over stock
  • Dual rate coil springs with lifetime guarantee against sagging/breakage
  • 2.0 Aluminum Series shocks with vehicle specific valving
  • 100% bolt-on system makes for an easy install
  • “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability


  • OEM Wheels & Tires: Yes
  • [NON-RUBICON] Aftermarket Wheels: 8.5″ Wide, 4.5″ Backspace
  • [NON-RUBICON] Aftermarket Tires : 35″ x 12.50 (Larger tires will fit with recommended bump stop spacer kit and minor trimming)
  • [NON-RUBICON] Recommended Wheel: ICON Alloys ‘Rebound’ | 17×8.5 / 4.5″ BS / -6mm Offset
  • [RUBICON] Aftermarket Wheels: 8.5″ Wide, 4.75″ Backspace
  • [RUBICON] Aftermarket Tires: 35″ X 12.50 (37″ tires will fit with recommended bump stop spacer kit)
  • [RUBICON] Recommended Wheel: ICON Alloys ‘Alpha’ | 17×8.5 / 4.75″ BS / 0mm Offset

Customer reviews


There are no reviews yet.

Be the first to review “ICON 2.5″ Lift Kit For 2018-2019 Jeep Wrangler JL (Stage 1)”

Use one of the allowed file type: jpg,png,jpeg.

    Questions and answers of the customers

      I would like to follow up on my question about the Stage 1 2.5" lift kit for my 2020 Jeep JL Rubicon. I'm concerned that the Jeep JL Rubicon does not come with an adjustable track bar. When you raise the Jeep with your stage 1 kit, how do you adjust the non-adjustable stock track bar to avoid pulling on the axle (front and rear)?
    1. 0 votes
      Q I would like to follow up on my question about the Stage 1 2.5" lift kit for my 2020 Jeep JL Rubi...... Read more answer now
    2. I have a 2020 Jeep JL Wrangler Rubicon. It is hard for me to decide what 2.5" stage 1 lift kits from the various manufacturers. What differentiates Icon from competitors such as Metal Cloak and Mopar's kits? I am very in ride quality, stability when climbing and durability.
    3. 0 votes
      Q I have a 2020 Jeep JL Wrangler Rubicon. It is hard for me to decide what 2.5" stage 1 lift kits f...... Read more answer now
      A We do not sell sets such as Metal Cloak and Mopar's, for this reason we cannot say anything about these sets. But we can definitely say that all ICON kits are of very good quality and work perfectly both on the road and off-road.

    Send me a notification for each new answer.


    Original price was: $1,343.70.Current price is: $1,209.36.

    In stock

    In stock