Bilstein 6112 0-2.75″ Front Lift kit and shocks 2011-2018 Ram 1500 4WD

SKU: 47-311015_2x24-187374
4.75 out of 5 based on 4 customer ratings
(4 customer reviews)

Description

Bilstein 6112 0-2.75″ Front Lift and 5100 0-1″ Rear lift Shock Coil Kit for 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 Ram 1500 4WD

Part: 47-311015_2x24-187374

Need it assembled?

Includes: Front 6112 kit (Front shocks & front coils), Rear Bilstein 5100 Shocks

Front kit(47-311015):

Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.

Rear Shocks (24-187374):

Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

  • Collapsed Length (IN) 16.75
  • Extended Length (IN) 26.73
  • Collapsed Length (MM) 425.5
  • Extended Length (MM) 679.0
  • Finish Zinc Plated
  • Reservoir No
  • Body Design Smooth Body (Non-Coilover)
  • Body Diameter 46mm
  • Spring Seat Included No
  • Adjustable Damping Non-Adjustable

Customer reviews

Rated 4.75 out of 5 stars
4 reviews
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

4 reviews for Bilstein 6112 0-2.75″ Front Lift kit and shocks 2011-2018 Ram 1500 4WD

Add a review

Use one of the allowed file type: jpg,png,jpeg.

    Questions and answers of the customers

      Does the front shocks level the truck?
    1. 0 votes
      Q Does the front shocks level the truck? answer now
      A Yes they do level
    2. Is this the correct rear coil spring to go with this kit Part: 36-286539? I see two different rear coil springs listed under your parts inventory.
    3. 0 votes
      Q Is this the correct rear coil spring to go with this kit Part: 36-286539? I see two different rea...... Read more answer now
      A https://www.suspensionlifts.com/shop/dodge/09-12-dodge-ram-1500/2009-2010/rear-lifts-2009-2010/bilstein-b12-1-5-rear-lift-coils-for-2009-2019-ram-1500/ yes, it will be good
    4. It's this the same as a 2.5 in leveling kit
    5. 0 votes
      Q It's this the same as a 2.5 in leveling kit answer now
      A 6112 shocks have thicker shock body
    6. With this leveling kit, what about the rear springs?
    7. 0 votes
      Q With this leveling kit, what about the rear springs?
      There are no answers for this question yet. Answer now
    8. Hello. I wanted to know if I run this Bilstein set up on my 2015 Ram crew cab 4x4. Would I be able to run 20x12 wheels w 35x12.5 tires? Rub? Additional lift req? Recommendations?
    9. 0 votes
      Q Hello. I wanted to know if I run this Bilstein set up on my 2015 Ram crew cab 4x4. Would I be abl...... Read more answer now
      A Oh yeah it will i ride on 5100s very smooth but turning my wheels does rub slightly theyre 33x12.50x22. Youll definetely will need a lift maybe a 4 inch otherwise your tires will definetely will get shred like cheese.
    10. With this kit on a 2016 Ram 1500 4*4 will 22*12 -44 offset with 33*12.5 tires fit without any rub?
    11. 0 votes
      Q With this kit on a 2016 Ram 1500 4*4 will 22*12 -44 offset with 33*12.5 tires fit without any rub? answer now
      A Maximum that you can use with this kit Rim* - 8" Tire Width* - 11.5" Tire* - 33" Backspace - 5.5"
    12. Will these work with existing 3” lift on ram1500 4wd 2016?
    13. 0 votes
      Q Will these work with existing 3” lift on ram1500 4wd 2016? answer now
      A Front shocks and springs are able to lift the front up to 2.75'' by themselves Rears will fit 0-1'' lift
    14. Recommendations for upper control arm with this kit?
    15. 0 votes
      Q Recommendations for upper control arm with this kit? answer now
      A Hello UCAs are always not a bad idea, but the lifts up to 3'' can go without UCAs. We can offer https://www.suspensionlifts.com/shop/dodge/09-12-dodge-ram-1500/2009-2010/upper-control-arms/icon-uniball-upper-control-arm-kit-2009-2017-dodge-ram-1500/ https://www.suspensionlifts.com/shop/dodge/09-12-dodge-ram-1500/2009-2010/upper-control-arms/icon-tubular-ucas-delta-joint-2009-2018-dodge-ram-1500/
    16. Is it recommended to get steering stabilizers or tie rods or anything else to beef up the front end before getting these?
    17. 0 votes
      Q Is it recommended to get steering stabilizers or tie rods or anything else to beef up the front e...... Read more answer now
      A Hello This kit will be enough Position:Front Notes:-Front Lift Height: 0-2.6" Position:Rear Notes:-For Rear Lifted Height: 0-1" Without Air Suspension
    18. Can these replace my rough country struts and shocks on a 6 inch lift?
    19. 0 votes
      Q Can these replace my rough country struts and shocks on a 6 inch lift? answer now
      A it is not recommended to stack lifts, if you use stock height shocks now you may try using these on the lowest notch adjustment
    20. I currently have a 2 inch leveling spacer kit on my 16 ram 1500. When I pull a trailer of any weight my back end squats, and the front end comes up terribly. Will this kit address this issue?
    21. 0 votes
      Q I currently have a 2 inch leveling spacer kit on my 16 ram 1500. When I pull a trailer of any wei...... Read more
      There are no answers for this question yet. Answer now
    22. Will this lift work for a 2015 eco diesel 4x4?
    23. 0 votes
      Q Will this lift work for a 2015 eco diesel 4x4? answer now
      A Yes, it will fit 2015 Ram 1500 4WD EcoDisel with coil spring suspension
    24. Will this increase wheel travel?
    25. 0 votes
      Q Will this increase wheel travel? answer now
      A Yes, these shocks are longer then stock. Rears can handle up to 1'' rear lift
    26. Will the bilstein 6112 work on 2013 ram 2wd
    27. 0 votes
      Q Will the bilstein 6112 work on 2013 ram 2wd answer now
      A Unfortunately no, these are for 4WD
    28. Do the struts come already lifted to 2-3/4 or do they come at stock height and need adjusted to the full lift?
    29. 0 votes
      Q Do the struts come already lifted to 2-3/4 or do they come at stock height and need adjusted to t...... Read more answer now
      A The item comes not assembled
    30. Will i need a brake line extension. And what about stabilizer link.. should i get longer ones.
    31. 0 votes
      Q Will i need a brake line extension. And what about stabilizer link.. should i get longer ones. answer now
      A No, can go with stock length
    32. Do you use the stock cap for the top?
    33. 0 votes
      Q Do you use the stock cap for the top? answer now
      A You may reuse your old
      A Yes
    34. Is the coil any differnt than a stock coil on the Ram 1500?
    35. 0 votes
      Q Is the coil any differnt than a stock coil on the Ram 1500? answer now
      A Coils are longer, providing additional lift
    36. Does this keep the correct geometry on the upper control arm or do I need to worry about that failing down the road?
    37. 0 votes
      Q Does this keep the correct geometry on the upper control arm or do I need to worry about that fai...... Read more answer now
      A No need to worry, it's designed to fit the stock suspension parts. UCA's are recommended but not require, the benefit of the UCA's is to fix the caster when the vehicle is getting aligned and also helps you a lot with articulation on the front end.
    38. Is this a direct bolt on? Will I need any supporting mods to make these work on my truck?
    39. 0 votes
      Q Is this a direct bolt on? Will I need any supporting mods to make these work on my truck? answer now
      A You would need a coil spring compressor for these
      A You would need a coil spring compressor for installation. They can work as is, front height is adjustable (Adjustment Range: 0 To 2-3/4 Inch Front) , as for the rear - the rear shocks will not give you any lift by themselves but can work with existing 1'' lift

    Send me a notification for each new answer.

    -

    $1,046.00

    More than 30 available

    More than 30 available

    1-3 Day Transit Time