ARB/OME 2-3″ Lift Kit for 2007-2009 FJ Cruiser and 2003-2009 4Runner

SKU: OME-FJ4R
5 out of 5 based on 1 customer rating
(1 customer review)
ARB/OME 2-3" Lift Kit for 2007-2009 FJ Cruiser and 2003-2009 4Runner

Description
ARB/OME 2-3″ Lift Kit for 2007-2009 FJ Cruiser and 2003-2009 4Runner

ARB/OME 2-3″ Lift Kit for 2007-2009 FJ Cruiser and 2003, 2004, 2005, 2006, 2007, 2008, 2009 4Runner

Part: OME-FJ4R

The relationship between vehicle weight and suspension is where Old Man Emu gets its name – the emu is a large Australian flightless bird, when it runs, its powerful legs absorb most of the impact, allowing it to move over all types of terrain while its body remains virtually motionless. This is what Old Man Emu strives to achieve with its range of fully integrated 4×4 shocks and suspension systems. Old Man Emu suspension systems include carefully matched spring and shock combinations engineered to improve vehicle ride, handling and control under various loads.

This kit has been specifically designed for your 4Runner or FJ and has been proven in the harsh conditions of the Australian Outback.

Front coils: 4001 (newer design for all purposes)

Select weight settings from options:

  • Stock Weight 2″ Lift (Clip 2/1)
  • Alloy Bull Bar Only 2″ Lift (Clip 3/2)
  • Steel Bull Bar Only 2″ Lift (Clip 4/3)
  • Bull Bar & Winch 2″ Lift (Clip 5/4)
  • Bull Bar, Winch & Accessories 2″ Lift (Clip 5)

Rear coils: Choose one option in dropdown:

  • OME 2895E: Medium 1.5 inch lift coils. Select 60004 rear shocks
  • OME 2895: Medium 2 inch lift coils. Select 60004 rear shocks
  • OME 2896: Constant Load Heavy 2 inch lift coils. Select 60004 rear shocks

Includes 93000 Nitro+ Front Shocks with newer design. Shocks come with 2 rings each that can be positioned upside down deoending on your vehicle’s weight configuration. Instructions manual will show you how to properly install them

NOTE: Med and Heavy coils are rated to handle additional weight from aftermarket bumpers, winches, and accessories and should NOT be used without stated weight already in or installed at all times. All lift figures are based on averages.

OME Suspension Lift Kit for ’07, ’08, ’09 FJ and ’03, ’04, ’05, ’06, ’07, ’08, ’09 4Runner

OME Lift Kit installation instructions for FJ/4Runner 03-09

Customer reviews

Rated 5 out of 5 stars
1 review
5 stars 1 100 %
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

1 review for ARB/OME 2-3″ Lift Kit for 2007-2009 FJ Cruiser and 2003-2009 4Runner

    Add a review

    Use one of the allowed file type: jpg,png,jpeg.

      Questions and answers of the customers

        What springs would I need to compensate for the v8 engine in the 4Runner to get a 3 inch lift
      1. 0 votes
        QWhat springs would I need to compensate for the v8 engine in the 4Runner to get a 3 inch lift
        There are no answers for this question yet. Answer now
        2. So if I choose OME 895: Medium rear coils will it be a 3" lift in the rear? Because the description says its a 2" lift but it says 2-3" lift in the product name.
      2. 0 votes
        QSo if I choose OME 895: Medium rear coils will it be a 3" lift in the rear? Because the descripti...... Read more answer now
        A Additional rear height will be 2''Front additional height will be higher.It is made for leveling
        3. im wanting to get this kit for my fj, ive got a steel bumper and some skid plates. what do you think is the best combo for my set up? i dont have a winch and dont plan on getting one. if id had to guess id say i have 130lbs extra on my front end. the rear is stock but i do add around 100lbs of camping equipment when i go camping. i was thinking 90021 front shocks, 885 front springs, 60004 rear shocks, and 895 rear springs. and of course the front top plate spacers to get the whole 3" front lift. let me know if you think i should change the set up, thank you.
      3. 0 votes
        Qim wanting to get this kit for my fj, ive got a steel bumper and some skid plates. what do you th...... Read more answer now
        A Hello Yes, you are right with the springs Considering your weight in front and the fact that you do not plan to put the winch, these springs will fit on front As for the rera, it also fits, but when there is no load, it will be a little tough
        4. For the rear end, What is the difference between OME 60020 and 60004? is phisically larger? higher rate? would cause any harm if you mix Toytec superflex with OME 60004?
      4. 0 votes
        QFor the rear end, What is the difference between OME 60020 and 60004? is phisically larger? highe...... Read more answer now
        A No harm but rear OME coils designed to work with definite shocks with their own damping settings. Comfort and road handling will be better
        5. Can you tell me total weight and mesures from packing boxes? Im planning to send them out abtoad as a gift.
      5. 0 votes
        QCan you tell me total weight and mesures from packing boxes? Im planning to send them out abtoad ...... Read more answer now
        A 1) 46.4lb - 29x12x8 in. 2) 14.3lb - 31x6x3 in. 3) 23lb - 18x14x7 in.
        A Total weight of 4 shocks and 4 coils is approximately 60 lbs
        6. I have a 96 4Runner 4x4 and routinely haul an extra 200lbs or so (gear box, plate bumper). The front is stock. What set up would you recommend for me? Looking for about a 2” lift all the way around.
      6. 0 votes
        QI have a 96 4Runner 4x4 and routinely haul an extra 200lbs or so (gear box, plate bumper). The fr...... Read more answer now
        A Please consider this kit and select 881 coils. * * * https://suspensionlifts.com/shop/toyota-4runner/1996-2002/complete-ome-suspension-for-1996-2002-toyota-4runner/ * * * If carrying more then 200lbs+ and need more then 2'' lift then you'll need 883 coils
        7. Do I need upper control arms with this kit?
      7. 0 votes
        QDo I need upper control arms with this kit?answer now
        A UCA's are recommended but not require, the benefit of the UCA's is to fix the caster when the vehicle is getting aligned and also helps you a lot with articulation on the front end.
        8. Looking to purhase me a set of OME. Do i need the assembly ? Im taking my rig to a shop for installation
      8. 0 votes
        QLooking to purhase me a set of OME. Do i need the assembly ? Im taking my rig to a shop for insta...... Read more answer now
        A If the shop has spring compressor and all the tools (probably yes) then no need to order it assembled.Assembly option is good for installing by yourself
        9. One more quick question. With no extra weight on my 2008 Toyota 2wd FJ, should I go with the 884 coils in front, and the toytec light coils in back, and which rear shocks?
      9. 0 votes
        QOne more quick question. With no extra weight on my 2008 Toyota 2wd FJ, should I go with the 884 ...... Read more answer now
        A You arre right:884 for the front,ToyTec SuperFlex for the rear + 60020 shocks
        10. Can this setup be used on my 2WD 2008 fj cruiser?
      10. 0 votes
        QCan this setup be used on my 2WD 2008 fj cruiser?answer now
        A Yes
        11. what's the height difference between this and the fought country sus lift
      11. 0 votes
        Qwhat's the height difference between this and the fought country sus liftanswer now
        A OME 884: Stock front weight. 2-2.5 inch lift. Add Top Plate Spacers for full 3 inch lift OME 885: 70-180 lbs additional front weight 2-2.5 inch lift. Add Top Plate Spacers for full 3 inch OME 886: 230 + lbs additional front weight (heavy bumper and winch) 2.5- 3 inch Lift
        12. On the OME-FJ4R what make/model are the front shocks that are included?
      12. 0 votes
        QOn the OME-FJ4R what make/model are the front shocks that are included?answer now
        A

        OME 90000 shocks

      Send me a notification for each new answer.
      ATTENTION STATE OF CALIFORNIA CONSUMERS. WARNING: Cancer and reproductive harm – www.p65warnings.ca.gov

      Related products

      -

      Base Price: $1,109.95

      In stock

      In stock

      • Assembly option might take up to 7-10 days. Assembled with new top mounts, bushings, hardware.
      Share (7)
      Total: 0 Total: 0 Total: 0 Total: 7