Bilstein 5100 adjustable 0-2.5″ front, rear shocks 1995-2004 Toyota Tacoma 4WD/2WD
Bilstein 5100 Height Adjustable Front Shocks and Matching Rear Shocks
Fits Toyota Tacoma 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Front and rear Bilstein 5100 shocks
Front D558 height adjustable shocks can be set at 0, 1.25, and 2.5 inches of lift with the factory coils
Extended length: 18.64″
Collapsed length: 13.39″
Rear D560 extended length 5100 Bilstein shocks work great with 0 to 2 1/2″ lift.
– – – –
2 x F4-BE5-D558-T0
– – – –
F4-BE5-D559-T0 Extended length: 21.63″ Collapsed length: 13.93″ (Driver side)
F4-BE5-D560-T0 Extended length: 22.57″ Collapsed length: 14.65″ (Passenger side)
NOTE: Front shocks do not include upper bushings or washers.
Will not fit 5 wheel lug Tacoma’s. Please check your application before ordering.
need a full lit kit?
Questions and answers of the customers
I have a Tacoma 2000 regular cab with a 2.4 engine and 5 lugs, with stock suspension I would like to lift it 2.5", will this kit work for me?
- Will this fit 2004 Tacoma 5 lug?
Q Will this fit 2004 Tacoma 5 lug?
will these work on a 2002 prerunner specifically 3.4L v6?
Q will these work on a 2002 prerunner specifically 3.4L v6? answer nowA Yes! Will work perfect.
I have a 2002 TACO prerunner 4dr, stock hieght , if I put 5100's front and rear and leave to lowest hieght settings would that need a new coil?or anything else like bushings for front
- I am trying to find the certain bushings I'm going to need to install these. Do you have a link or anything where I can find them?
- Do the front shocks come with the protection covers?
Q Do the front shocks come with the protection covers? answer nowA they come as pictured generic boots can be purchased if desired https://www.suspensionlifts.com/shop/nissan/nissan-xterra/2-pro-comp-black-boots-shocks/
I have new coils, and a completely stock 1995 tacoma. I just want a small lift. Other than the bushings for the front, is there anything else ar all I need to achieve around a 2" lift?
- I can't seem to find the bushing kit on here for the front shocks on the bilstein 5100 adjustable?
Q I can't seem to find the bushing kit on here for the front shocks on the bilstein 5100 adjustable? answer nowA you can reuse your old bushings if they are in a good shape or order OEM bushings from Toyota
Will this fit my 1999 Tacoma 4X4 6 lug pickup? and if so is it required to have a drop kit for the CV axles?
- Thank you for taking my question. I have a completely stock ‘03 Tacoma TRD 4x4 V6 Double Cab. I’m searching for the best method to level out the truck as it has that factory rake to it to compensate for weight in the bed or trailering. I’m thinking the 5100 adjustables would be perfect for the front but unsure if I can reuse the factory coils, what setting on the c clip to use, and if I need to do anything in the rear to maintain level? The truck has 29,000 original miles so I think the coils have some life left . But if they’re not usable I’m open to replacements if you could provide part numbers. Thanks
- What coils do you recommend? I want to change out my stock coils. I have 99 4x4 single cab Toyota Tacoma. I do plan on using the 1” Toytec blocks to get it level with front, I’m not sure what coils to get for getting it level.
Q What coils do you recommend? I want to change out my stock coils. I have 99 4x4 single cab Toyota...... Read more answer nowA we can offer https://www.suspensionlifts.com/shop/toyota-tacoma/1995-2004/front-lifts-and-coilovers-95-04-tacoma/toytec-eibach-3-front-lift-coil-springs-for-1995-2004-toyota-tacoma/ https://www.suspensionlifts.com/product-category/toyota-tacoma/1995-2004/?swoof=1&pa_product-type=coils&really_curr_tax=33-product_cat
Can I use these with ome 881
Q Can I use these with ome 881 answer nowA Yes, on the lowest notch adjustment
will the springs and top mounts off of Rancho RSL 9000 quicklift shocks fit these shocks?
Q will the springs and top mounts off of Rancho RSL 9000 quicklift shocks fit these shocks?
What is the torque spec on the rear shock?
Q What is the torque spec on the rear shock? answer nowA Please use OEM specs
I have a 1999 Toyota tacoma sr5 with 5 lug wheels, would this kit work. Also are there struts on the front end because it doesnt look like it to me.
Q I have a 1999 Toyota tacoma sr5 with 5 lug wheels, would this kit work. Also are there struts on ...... Read more answer nowA Nevermind I missed the part saying it wont fit.A For 5-lug we can offer only such shocks * * * https://suspensionlifts.com/shop/toyota-tacoma/1995-2004/1995-2004-5-lug-tacoma/bilstein-4600-front-rear-shocks-1995-2004-toyota-tacoma-5-lug-2wd/
Will these work with stock oem springs
Q Will these work with stock oem springs answer nowA It worked for me, I used the stock springs on my 04 Tacoma Extended Cab 4x4A Yes, will work, Front shocks are height adjustable and are able to lift the front end on stock coils up to 2,5'' rear shocks are just longer then stock but will not lift the rear end by themselvesA I emailed Bilstein directly and I was told there 5100 rear shocks will not work with stock height vehicles
If I stack a 6 inch rough country spacer on these? And if so how will it ride?
Q If I stack a 6 inch rough country spacer on these? And if so how will it ride? answer nowA it will ride but it is not recommended to stack lifts so can be used on lowest notch adjustment in order not to overlift the truck
Is this setup good to use on a 2001 4x4 single cab Tacoma? Also, do you recommend the diff drop as well?
Q Is this setup good to use on a 2001 4x4 single cab Tacoma? Also, do you recommend the diff drop a...... Read more answer nowA Diff drop kt is recommended for 4WD trucks for 1.5'' of front lift and more to increase the CV axles life. For single cab please use no more then 3rd notch adjustment - it might gove you about 3'' of additional lift depending on your trucks additional weight.
can you use these on a 98 tacoma with 2.5 in front spacers if so would you leave them at stock height
- Does it matter if you install the rear shocks boot up or Down?
Q Does it matter if you install the rear shocks boot up or Down?
Will I need to/should use an aal in the rear with these? Looking at the toytec progressive aal. I'm putting a small kit together I wanted the toytec 3" bilsten lift kit but I have a 2.7 4x4 ext. cab and no extra front weight..
- Will this kit work for stock height 2004 Tacoma extended cab 4x4
Q Will this kit work for stock height 2004 Tacoma extended cab 4x4 answer nowA Yes, it will work with stock height. As front shocks are height adjustable they'll allow to lift the front up to 2,5'' using stock coils if you'll want to
Will these front shocks fit OME 883 coils?
Q Will these front shocks fit OME 883 coils? answer nowA You may use it with OME cols, but better to use with stock or 112-620 coils. * * * https://suspensionlifts.com/shop/toyota-fj-cruiser/toyota-fj-cruiser-2010-2011-2012-2013/front-lifts/toytec-eibach-front-coil-lift-springs/ * * * OME coils are to be used with OME shoks
Hello will these fit a stock 2002 crew crab prerunner v6? I see some notes saying a 1” lift block must be added or is that not necessary for replacing prerunner rear shocks?
Q Hello will these fit a stock 2002 crew crab prerunner v6? I see some notes saying a 1” lift block...... Read more answer nowA It's not necessary. The rear shocks can fit either 0'' rear lift (stock height) or 1'' rear liftA After installing the rear shocks on a 0" stock rear end (04 prerunner DC V6), the shocks bottomed out a few times as they are very compressed. Unless your rear leafs have zero sag, I recommend a rear lift or bump stop extensions.
which shock part number goes on the rear drivers side? rear passenger side? Thanks, Darin
Q which shock part number goes on the rear drivers side? rear passenger side? Thanks, Darin answer nowA D559 - Driver side, D560 - Passenger side
I have the F4-BE5-D560-T0 rear shocks included in this kit. What is the extended and compressed length of the shocks?
- I have an 04 tacoma TRD 4x4 can I use this strut with a 3 inch spacer lift
Q I have an 04 tacoma TRD 4x4 can I use this strut with a 3 inch spacer lift answer nowA Yes, you can do it, but these shocks allow to remove spacers and have the same lift using shocks adjustment. Please note, that having more then 3'' of lift will not be good for the cv axles, control arms and the suspension - that's why it is not recommended to use 3'' spacers with some adjustments except the lowest
will these fit a 98 prerunner not 4x4, stock height all the way around. i need new shocks and do not plan on lifting the truck. maybe leveling at some point though. also what setting would i need to put it on to level the truck. thanks
- I have a 2000 Tacoma and I just bought 33inch tires. What would I need to clear them? I don't wanna do a six inch. People preferred me to get this set up. What's your recommendations
Q I have a 2000 Tacoma and I just bought 33inch tires. What would I need to clear them? I don't wan...... Read more answer nowA
We always recommend test fitment before.
Generally using aftermarket longer UCAs is always not the bad idea, but first you cat try
- lifting up to 3'' (more lift will make harm to the stock suspension oarts)
- precisely adjustinc castor and chamber at about 1-1.5-2 dregee may help
- maybe wheel spacers (depending on your rims and suspension condition)
Please don't forget about diff drop kit if you have a 4WD
Will I still have that rake look?
Q Will I still have that rake look? answer nowA You may set the front D558 height adjustable shocks 0, 1.25, and 2.5 inches of lift with the factory coils. If you have rear lift 1'', then setting the front height adjustable shocks to a 2,5'' will level your truck and you'll have no rake look.
Will these shocks work on a 2WD '03 Tacoma Pre-Runner? Other sites show them as 4WD only
Q Will these shocks work on a 2WD '03 Tacoma Pre-Runner? Other sites show them as 4WD only
I recently bout a 07 Tacoma. Looking to put new shocks. It's has a 3" lift. Blocks in the back and spacers in the springs up front. Which shocks will I need to fit with the lift? Thank you.
Q I recently bout a 07 Tacoma. Looking to put new shocks. It's has a 3" lift. Blocks in the back an...... Read more answer nowA
Thanks for the details provided. These shocks https://suspensionlifts.com/shop/toyota-tacoma/2005-2015/bilstein-height-adjustable-5100-front-and-rear-5100-shock/ may fit the 2007 Tacoma if you had slightly lower (0-2.5'' front and 0-2'' rear) lift. For the rear we have: https://suspensionlifts.com/shop/toyota-tacoma/2005-2015/shocks-05-15/toytec-boss-rear-shocks-2005-2014-tacoma-00-06-tundra/, for the front you may use Bilstein 5100 ride height adjustable Please keep in mind, that this kit is for a 6 Lug Tacoma 4WD. If you have 2WD Tacoma please specify it, the cab size and the engine.
Could I use these shocks with the old man emu 882 coils on a Fabtech 6in lift?
Q Could I use these shocks with the old man emu 882 coils on a Fabtech 6in lift? answer nowA It is strictly not recommended to stack lifts. And unfortunatelly these shocks will be too short for that.
How do i get replacement shocks for the lift i purchased from you!!. Its a 1997 tacoma. I have the billstin coilovers 3" lift
- How much does this package weigh?
Q How much does this package weigh? answer nowA 22lb
How are the front struts adjustable? would i need to purchase aftermarket upper control arms also?
Q How are the front struts adjustable? would i need to purchase aftermarket upper control arms also? answer nowA Front struts can be set at 0, 1.25, and 2.5 inches of lift with the factory coils. UCAs not required, but may be installed additionally.
Will these work on stock height 03 tacoma front and rear?
Q Will these work on stock height 03 tacoma front and rear? answer nowA Front shocks can lift the vehicle, rear shocks can't and you need rear lift 1-2.5" in order to use the rear shocksAFront shocks can lift the vehicle, rear shocks can't and you need rear lift 1-2.5" in order to use the rear shocksSuspensionlifts.com can offer you some items for rear lift starting with 1″ Rear Lift Block https://suspensionlifts.com/shop/toyota-tacoma/2005-2015/complete-lift-kits-tacoma-05-and-up/pro-comp-1-rear-lift-block-u-bolt-kit-1995-2014-toyota-tacoma-tundra-1999-2014/ . After installing the shocks you've chosen and the rear 1'' lift block you can gain 2,5'' front lift and 1'' rear lift, whick will level your truck. Please keep in mind, that such lift blocks are recommended for use in case you don't carry heavy loads and do no towing.
Is it possible to mount these on a 5 wheel lug 1996 Toyota Tacoma with a 1.5" add a leaf?
Q Is it possible to mount these on a 5 wheel lug 1996 Toyota Tacoma with a 1.5" add a leaf? answer nowA Unfortunately not.
Will these shocks and struts work with a 5" Tuff Country lift?
Q Will these shocks and struts work with a 5" Tuff Country lift? answer nowA
No, you would need longer shocks.
Do these shock fit factory mounts on truck rear .750 dia. Also are the oem springs for the front avalible and the deleting spacer that goes in the wheel well.
- Do you sell this kit with rear shocks for a stock height 98 Tacoma 4x4?
Q Do you sell this kit with rear shocks for a stock height 98 Tacoma 4x4? answer nowA Unfortunately not.
You may also like…
ICON 1.5″ Lift Rear Expansion Pack Add a Leaf 1995-2023 Toyota Tacoma(15 reviews)$227.95 Add to cart