Bilstein/OME 2-2.5″ Coilovers with 5100 Rear Shocks for 1995-2004 Toyota Tacoma

Description
Bilstein/OME 2-2.5″ Coilovers with 5100 Rear Shocks for 1995-2004 Toyota Tacoma

Bilstein 5100 Front Coilovers with Selectable Rear Shocks

Give your 1995-2004 Toyota Tacoma a more controlled, better-matched suspension setup with assembled Bilstein 5100 front coilovers and your choice of rear shocks. The selected front spring supplies the lift, while the Bilstein monotube dampers provide consistent control for street driving, trails, and changing terrain.

This front-and-rear shock package is for 6-lug Toyota Tacoma models only. It combines two assembled front coilovers, a selected pair of OME or Eibach front springs, new mounting hardware, and two rear shocks matched to the rear lift range you select. Rear lift components are not included in this configuration.

What’s Included

• 2 assembled front coilovers using Bilstein B8 5100 front shocks, part F4-BE5-D558-T0
• 1 selected pair of front coil springs: OME 2880, OME 2881, OME 2883, or Eibach E30-82-006-05-20
• New top mounts, bushings, and assembly hardware for the front coilovers
• 2 selected rear shocks matched to the rear lift range you choose

Choose Your Front Spring

The spring choice determines the approximate front lift and should match the Tacoma’s constant front weight. Actual ride height can vary with cab, engine, drivetrain, accessories, and existing suspension condition.

Rear Shock Options

• 1-1.5 in. rear range: Bilstein 5100 pair, 33-247724 and 33-247717
• 0-2.5 in. rear range: Bilstein 5100 pair, F4-BE5-D559-T0 and F4-BE5-D560-T0
• 2.5-3.5 in. rear range: Bilstein 5100 pair, 33-186542

The rear-shock selection changes the shock application range; it does not add rear leaf springs, add-a-leafs, blocks, or other rear lift components.

Fitment and Installation Notes

• Fits 1995-2004 Toyota Tacoma 6-lug models, including the listed 2WD and 4WD product applications.
• Does not fit 5-lug Tacoma models.
• Front assemblies are configured on Clip 1, the lowest setting, because the selected springs provide the lift. Raising the spring seat without confirming the application can create excessive lift and risk suspension damage.
• Have the suspension installed by a qualified technician and complete a professional alignment after installation or any ride-height change.

Frequently Asked Questions

Which front spring should I choose?
Use OME 2880 for a mild lift with stock front weight, OME 2881 for approximately 2-2.5 inches with stock front weight, Eibach E30-82-006-05-20 for approximately 2.5 inches with stock front weight, or OME 2883 when the Tacoma carries 200+ lb of constant front weight.

Does this package include rear lift parts?
No. This package includes two selected rear shocks only. Rear lift components are not included, so choose the rear shock range that matches the truck’s existing or separately installed rear height.