Your cart is currently empty!
OME 1.5-3″ Front Lift Coilovers For 1995.5-2004 Toyota Tacoma
Sale!Description
OME 1.5-3″ Front Lift Coilovers For 1995.5-2004 Toyota Tacoma
OME 1.5-3″ Front Lift Coilovers For 1995.5, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Toyota Tacoma
Part:Â OME95TC
Need the full kit?
OME 2″ Front Lift Coilovers and 2″ Rear Lift Nitro+ Shocks For 1998-2004 Toyota Tacoma
(0 reviews)Base Price: Original price was: $999.49.$946.95Current price is: $946.95.
Designed for superior performance across all terrain, an Old Man Emu suspension upgrade by ARB will provide noticeable improvements to a vehicle’s performance, including load carrying capacity and control characteristics.
Includes:
- OME 93004 Front Nitro+ Shocks
Select weight settings from options:
- Stock Weight 2″ Lift (Clip 2/1)
- Alloy Bull Bar Only 2″ Lift (Clip 3/2)
- Steel Bull Bar Only 2″ Lift (Clip 4/3)
- Bull Bar & Winch 2″ Lift (Clip 5/4)
- Bull Bar, Winch & Accessories 2″ Lift (Clip 5)
Coilover assembly option: with new top mounts and hardware. No spring compressor required to install these.
Includes clip/ring preinstalled for drivers side lean.
Tech Notes:
- Â Â Â Â *Note: Lift amounts are based on average results.
- Â Â Â Â *Will not fit 5 lug Tacoma.
Questions and answers of the customers
-
Do they come as a pair at $659.99? 2 shocks, 2 springs?
- A yes comes a pair of shocks and a pair of coilsdo you guys sell just the gas shocks alone?
- A We can offer https://www.suspensionlifts.com/product-category/toyota-tacoma/1995-2004/shocks-1995-2004-tacoma/?swoof=1&product_brand=ome&really_curr_tax=47-product_catI am looking to purchase the ome 1.5-3 with the 883 springs for 2000 Tacoma . I see now that you don’t offer the set assembled. Is there anything else that needs to be purchased to make this a complete set?
- QI am looking to purchase the ome 1.5-3 with the 883 springs for 2000 Tacoma . I see now that you ...... Read more answer nowA upper bushings and top hats needed - OEM can be reused if they are in a good shapeHow much additional lift would it be if I have a 4 cylinder RWD
- A About 2.5'' with 880 coilsWhy is 883 not recommended for 2wd?
- A OME 883: 200 + lbs additional front weight (heavy bumper and winch) 2.5- 3 inch Liftnot recommended for access cab without additional weightI have a 1997 reg cab 4x4 2.7 Tacoma just replaces the rear blown out Bilstein with a pair of ome shocks And they seem great last years I replaced the Bilstein 5100 with a matching set of 5100’s with ome 2880 stock height coils set o. The middle notch I don’t find them that comfortable would the ome sport shocks and ome 2881 be a big improvement I also have a add a leaf on the back your thoughts would be appreciated
- QI have a 1997 reg cab 4x4 2.7 Tacoma just replaces the rear blown out Bilstein with a pair of ome...... Read more answer nowA Don't think it will give a big improvementI'd suggested using the lowest notchDo these come pre assembled if not how much more does it cost to have them ready to bolt on ?
- QDo these come pre assembled if not how much more does it cost to have them ready to bolt on ?answer nowA They do not go to regret Assembled and we cannot Assembled them yet, but they can do it in workshopsIf I don't pay to have them assembled will they come with a top hat, bushings, or any other hardware?
- QIf I don't pay to have them assembled will they come with a top hat, bushings, or any other hardw...... Read more answer nowA Without top hats and bushings if not assembledHELLO WHAT is the difference these coilover than just buying the 90004 shocks and the 2883 springs separately?
- QHELLO WHAT is the difference these coilover than just buying the 90004 shocks and the 2883 spring...... Read more answer nowA It will come assembled with top hat ready for bolt-on installationif i were to add the top plate spacers for a full 3" on my 2003 tacoma prerunner, would i have to change my UCA ? will the length of the coilover affect the cv joints
- Qif i were to add the top plate spacers for a full 3" on my 2003 tacoma prerunner, would i have to...... Read more answer nowA UCA's are recommended but not require, the benefit of the UCA's is to fix the caster when the vehicle is getting aligned and also helps you a lot with articulation on the front end.Diff drop kit is recommended for 4WD trucks for 1.5'' of front  lift and more to increase the CV axles life.will these fit on a 2004 single cab prerunner 2wd
- A Yes, it will fit 2WD Tacoma if it is 6-lug.2wd Prerunner lift heights may vary. 881 and 883 coils are not recommend for 2wd without additional weight 9it can overlift the front, especially if having 4cyl engine, which is lighter then V6).Will 881s and 1/2in spacer plate provide 3inches of lift for my 2002 Tacoma Prerunner 3.4L Double Cab?
Different websites are giving me different answers.
Thanks!
- QWill 881s and 1/2in spacer plate provide 3inches of lift for my 2002 Tacoma Prerunner 3.4L Double...... Read more answer nowA Yes, you are right.883 can be recommended only for additional constant load 200+ lbs in the front, for stcok front weight they will be too stiffWill these interfere with any stock part of the steering at a 3in lift on a 1999 Toyota Tacoma
- QWill these interfere with any stock part of the steering at a 3in lift on a 1999 Toyota Tacomaanswer nowA On 3'' will be no interference.Only diff drop kt is recommended for 4WD trucks for 1.5'' of front  lift and more to increase the CV axles life.
2 reviews for OME 1.5-3″ Front Lift Coilovers For 1995.5-2004 Toyota Tacoma