ICON 1.5″ Lift Rear Expansion Pack Add a Leaf 1995-2023 Toyota Tacoma

SKU: 51100
4 out of 5 based on 15 customer ratings
(15 customer reviews)
Sale!

Description

ICON 1.5″ Lift Rear Expansion Pack Add a Leaf for 1995. 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 Toyota Tacoma

Part: 51100

Includes: 2 Add a Leaf Springs, 4 U-bolts and hardware.

Overview:

This 3 Leaf Progressive Add a Leaf Kit comes complete with U-bolts and Center pins for an easy install. This add a leaf kit will give your Tacoma / Tundra 1st gen 1.5″ of lift after installation. Just remove the factory overload and say good bye to that rough factory ride.

Installation instructions from our customer:

15 reviews for ICON 1.5″ Lift Rear Expansion Pack Add a Leaf 1995-2023 Toyota Tacoma

Add a review

Use one of the allowed file type: jpg,png,jpeg.

    Questions and answers of the customers

      What are the specs on the ubolts? I seem to have misplaced mine from this kit.
    1. 0 votes
      Q What are the specs on the ubolts? I seem to have misplaced mine from this kit.
      There are no answers for this question yet. Answer now
    2. is there any drive-line/drive shaft changes or shims needed on this kit? brake line extensions for the hydraulic lines or e-brake cable? Or is it just the springs and longer shocks that are required with this? it seems lifts blocks are sold with a taper to compensate for driveline issues. I assume this is the case with these springs too?
    3. 0 votes
      Q is there any drive-line/drive shaft changes or shims needed on this kit? brake line extensions fo...... Read more answer now
      A nothing more required for 1.5'' rear lift shims can be added later, usually they are needed for at least 2.5-3'' rear lift not less same for the brake lines
    4. Does this work with rear blocks?
    5. 0 votes
      Q Does this work with rear blocks? answer now
      A 123
      A They worked fine with my Pro Comp 1" LevelLift block kit.
    6. Is this AAL pack compatible with 1st gen (2001) 5 lug Tacoma?
    7. 0 votes
      Q Is this AAL pack compatible with 1st gen (2001) 5 lug Tacoma? answer now
      A no it's  for 5-lug
    8. U bolt torque specs? Thanks making sure it's 120 lbft ? Stock is around 75 right?
    9. 0 votes
      Q U bolt torque specs? Thanks making sure it's 120 lbft ? Stock is around 75 right?
      There are no answers for this question yet. Answer now
    10. Will factory 2008 TRD off-road shocks work with this AAL?
    11. 0 votes
      Q Will factory 2008 TRD off-road shocks work with this AAL? answer now
      A it's recommended to have at least 1'' longer shocks. 0-1'' will be good
    12. Will these fit my 2008 TRD Off-road Tacoma? Will I need new shocks or extensions?
    13. 0 votes
      Q Will these fit my 2008 TRD Off-road Tacoma? Will I need new shocks or extensions? answer now
      A will fit rear 0-1'' shocks will be good
    14. I have the B8 5160 series on the rear of my 2001 Tacoma, will these work without having to add anything else?
    15. 0 votes
      Q I have the B8 5160 series on the rear of my 2001 Tacoma, will these work without having to add an...... Read more answer now
      A yes will work
    16. Will these fix sag? My springs don't have the life they used to. Putting in new 5100's as well.
    17. 0 votes
      Q Will these fix sag? My springs don't have the life they used to. Putting in new 5100's as well. answer now
      A yes, we have it in stock
    18. Will these conflict with the Firestone Ride Right Air Bag kit? Thanks
    19. 0 votes
      Q Will these conflict with the Firestone Ride Right Air Bag kit? Thanks answer now
      A No conflict you can use it
      A definitely the sagging will be less
    20. Will 2012 Tacoma OEM shocks work with this AAL add on?
    21. 0 votes
      Q Will 2012 Tacoma OEM shocks work with this AAL add on? answer now
      A Not You will need to use longer shocks
    22. Do you have the extender shocks?. I saw them two months ago here in your website.
    23. 0 votes
      Q Do you have the extender shocks?. I saw them two months ago here in your website. answer now
      A If you need rear shocks we can offer https://www.suspensionlifts.com/product-category/toyota-tacoma/2016-and-up/shocks-2016-and-up/?swoof=1&pa_frontrear=rear&pa_product-type=shocks&really_curr_tax=354-product_cat
    24. Do you need any shock extension if I have the 5100 bilstein in the rear in order to use this AAL?. I need to put some weight (bed rack, roof top tent, some recovery gear and a hitch carrier)
    25. 0 votes
      Q Do you need any shock extension if I have the 5100 bilstein in the rear in order to use this AAL?...... Read more answer now
      A These will be good with rear 5100s
      A What kind of shock extension do I need. Do you sale them?
    26. Does this AAL fit a 2009 Tacoma TRD OR? I'm wanting to do Bilstein 5100's all the way around as well.
    27. 0 votes
      Q Does this AAL fit a 2009 Tacoma TRD OR? I'm wanting to do Bilstein 5100's all the way around as w...... Read more answer now
      A It will fit on 2009 Toyota Tacoma trd offroad We can offer rear shock https://www.suspensionlifts.com/shop/toyota-tacoma/2016-and-up/shocks-2016-and-up/rear-bilstein-5100-shocks-2005-toyota-tacoma/
    28. If I have the bilstein 5100 and need to carry medium load, can I install this AAL?
    29. 0 votes
      Q If I have the bilstein 5100 and need to carry medium load, can I install this AAL? answer now
      A Yes, it will be good
    30. Can these be added while keeping the one inch spacer block on the 3rd gen. Tacoma to keep factory rake when lifting the front 3”.
    31. 0 votes
      Q Can these be added while keeping the one inch spacer block on the 3rd gen. Tacoma to keep factory...... Read more answer now
      A Yes, you can keep your blocks. These AALs come with longer U-bolts that accommodate both.
    32. need to change my stock shock or not ?
    33. 0 votes
      Q need to change my stock shock or not ? answer now
      A At least 1'' lift rear shocks required
    34. When going with the 1.5" lift option, does is make the ride former or softer? Does it reduce payload?
    35. 0 votes
      Q When going with the 1.5" lift option, does is make the ride former or softer? Does it reduce payl...... Read more answer now
      A Payload remains the same, just sagging stops
    36. Do you carry the proper 1.5° shim for a 2017 Tacoma TRD sport 4x4 four-door
    37. 0 votes
      Q Do you carry the proper 1.5° shim for a 2017 Tacoma TRD sport 4x4 four-door answer now
      A we can offer https://www.suspensionlifts.com/shop/toyota-tacoma/2016-and-up/other-suspension-parts/solid-steel-axle-degree-shims/ and https://www.suspensionlifts.com/shop/toyota-tacoma/2016-and-up/other-suspension-parts/zinc-axle-degree-shims/
    38. What are the dimensions of the U Bolts? I am planning to install these on a 98 Tacoma with an OME exp pack, I may have to keep one of the overloads for towing and need to know if I will have to get longer u bolts.
    39. 0 votes
      Q What are the dimensions of the U Bolts? I am planning to install these on a 98 Tacoma with an OME...... Read more answer now
      A you need other AALs for OME leaf pack https://www.suspensionlifts.com/shop/toyota-tacoma/2016-and-up/other-suspension-parts/arb-ome-7-5-u-bolts-dakar-springs/ https://www.suspensionlifts.com/shop/toyota-tacoma/2016-and-up/rear-lift/arb-d29xl-pair-old-man-emu-rear-extra-leafs-for-2005-2018-toyota-tacoma/
    40. I have a 2018 TRD Sport and will be installing this soon. Everybody is talking shims and I would rather install shims while installing the AAL. If I will be running a rack, tonneau cover, tent, recovery boards, and a few other pieces of gear should I worry about any shims? If so, what degree is recommended? With the constant load (besides tent) I feel that I will only get an inch lift. Thanks ahead of time!
    41. 0 votes
      Q I have a 2018 TRD Sport and will be installing this soon. Everybody is talking shims and I would ...... Read more answer now
      A each 1'' of rear suspension lift is for 1 degree of a shim, so I think you don't need them with your additional constant load
    42. Am I able to remove the bottom leaf from the three? I am not wanting the full 1.5 inch lift.
    43. 0 votes
      Q Am I able to remove the bottom leaf from the three? I am not wanting the full 1.5 inch lift. answer now
      A this kit was intended to run all three leafs together. Removing the bottom leaf could cause damage to them by bending.
    44. Does this kit come with as a pair or do I need to order two
    45. 0 votes
      Q Does this kit come with as a pair or do I need to order two answer now
      A Pair as pictured.
    46. I own a 2019 Tacoma trd off-road with an Eibach pro lift kit installed. I appears to be an inch and a quarter higher in the front. Will this aal help bring it level
    47. 0 votes
      Q I own a 2019 Tacoma trd off-road with an Eibach pro lift kit installed. I appears to be an inch a...... Read more answer now
      A Yes, these add a leafs will bring the rear 1.5'' higher from stock height. Longer rear shocks needed https://www.suspensionlifts.com/shop/toyota-tacoma/2016-and-up/shocks-2016-and-up/toytec-boss-rear-shocks-2005-2014-tacoma-00-06-tundra/
    48. I have a 13 Tacoma trd off road and was planning on getting the icon stage 1, 0-3.5” coil over and shock kit, is it nessesary to get this add a leaf kit as well or will it be ok with the stock leaf springs?
    49. 0 votes
      Q I have a 13 Tacoma trd off road and was planning on getting the icon stage 1, 0-3.5” coil over an...... Read more answer now
      A if you want to level In order to figure out how much lift you need to level please take existing measurements from center of the wheel hub to the bottom of the fender. Difference between front and rear is how much lift you need to level. https://www.suspensionlifts.com/level.png You may ride with stock rear height if you want
    50. Will this work on my 3rd gen TRD Pro? If yes do I need to trim anything?
    51. 0 votes
      Q Will this work on my 3rd gen TRD Pro? If yes do I need to trim anything? answer now
      A Yes, they will work with a TRD PRO. About the trimming, it all depends on tire size. Usually with 33s trimming is not required or only little trimming needed (at full steer)
    52. Will these work with Bilstein 5160 on 2016 Tacoma?
    53. 0 votes
      Q Will these work with Bilstein 5160 on 2016 Tacoma? answer now
      A Yes, it will work
    54. Will this work on a 2018 Tacoma TRD PRO with factory stock Fox Shocks?
    55. 0 votes
      Q Will this work on a 2018 Tacoma TRD PRO with factory stock Fox Shocks?
      There are no answers for this question yet. Answer now
    56. Will these fit with a setup of the 5100s all around on a Trd Sport 4x2 DCLB?
    57. 0 votes
      Q Will these fit with a setup of the 5100s all around on a Trd Sport 4x2 DCLB? answer now
      A You can use it with rear 5100s for usual ride and soft offroading. For heavy offroading at full wheel articulation longer rear shocks will be recommended
    58. I have a 2019 Tacoma Double Cab TRD Offroad. Will these work with the longer Fox 2.0 985-26-118?
    59. 0 votes
      Q I have a 2019 Tacoma Double Cab TRD Offroad. Will these work with the longer Fox 2.0 985-26-118? answer now
      A No sir, for 985-26-118 you need at least 2.5'' of rear lift
    60. Hi, I have a 2018 Tacoma off road and just got the icon stage 1 lift kit. Will these fit the icon stage 1?
    61. 0 votes
      Q Hi, I have a 2018 Tacoma off road and just got the icon stage 1 lift kit. Will these fit the icon...... Read more answer now
      A Yes
    62. Hello will this work with a set of four 5100 shocks on my 2019 Tacoma 4WD? Will I need to change anything?
    63. 0 votes
      Q Hello will this work with a set of four 5100 shocks on my 2019 Tacoma 4WD? Will I need to change ...... Read more answer now
      A You'll need longer rear shocks https://www.suspensionlifts.com/shop/toyota-tacoma/2005-2015/toytec-boss-rear-shocks-2005-2014-tacoma-00-06-tundra/
    64. I have a 2013 Tacoma 4WD. Will the stock shocks be ok if I put these on?
    65. 0 votes
      Q I have a 2013 Tacoma 4WD. Will the stock shocks be ok if I put these on?
      There are no answers for this question yet. Answer now
    66. Can I still use the overload spring with this kit and if so how much more lift will it give
    67. 0 votes
      Q Can I still use the overload spring with this kit and if so how much more lift will it give answer now
      A Can't tell for sure, it will depend on bed length, cab size and other parameters. Definitely, the ride will be more rough with overload than without. This leaf pack was designed to be used without factory overload
    68. I have the standard suspension on my 2014 Tacoma trd off road, how high will this lift it and will I need longer shocks?
    69. 0 votes
      Q I have the standard suspension on my 2014 Tacoma trd off road, how high will this lift it and wil...... Read more answer now
      A It will give 1.5'' of rear lift, yes longer rear shocks will be needed
    70. I have a 1995 Tacoma. 6 lug 4x4 3.4 truck. Will these not work on my truck? It specifies 1996+...
    71. 0 votes
      Q I have a 1995 Tacoma. 6 lug 4x4 3.4 truck. Will these not work on my truck? It specifies 1996+... answer now
      A Sir, it will work
    72. I have Eibach Pro Truck leveling kit on a 2016 Tacoma Off Road and the front end is higher than the back. Will the set help level up with front?
    73. 0 votes
      Q I have Eibach Pro Truck leveling kit on a 2016 Tacoma Off Road and the front end is higher than t...... Read more answer now
      A Hello, in order to figure out how much lift you need to level please take existing measurements from center of the wheel hub to the bottom of the fender. Difference between front and rear is how much lift you need to level. https://prntscr.com/gfgxwt
    74. I have a 2017 toyota tacoma. Have 3 inch lift in the front and it looks a little funky with the the truck being a little tilt. My Rear shocks are stocks. Would i need to install different shocks for this to work?
    75. 0 votes
      Q I have a 2017 toyota tacoma. Have 3 inch lift in the front and it looks a little funky with the t...... Read more answer now
      A Yes, you need longer rear shocks * * * https://suspensionlifts.com/shop/toyota-tacoma/1995-2004/rear-bilstein-shocks-1995-2004-toyota-tacoma-and-1986-1995-pickup/ * * * https://suspensionlifts.com/shop/toyota-tacoma/1995-2004/shocks-95-04/toytec-boss-1-3-rear-lift-shocks-95-04-toyota-tacoma-86-95-pickup/
    76. What size and shape are the u bolts?
    77. 0 votes
      Q What size and shape are the u bolts? answer now
      A As pictured. What parameters do you need?
    78. I have a 2017 Tacoma TRD Offroad 4x4 with the Icon Stage 4 front coils and rear shocks. I have stock leafs in the rear. Will this kit fit my truck and will i need to purchase anything else? Also what would the lift be in the rear?
    79. 0 votes
      Q I have a 2017 Tacoma TRD Offroad 4x4 with the Icon Stage 4 front coils and rear shocks. I have st...... Read more answer now
      A It will give about 1-1,5'' rear lift. Nothing is needed if you already have lifted shocks
    80. does this product fit on 2017 tacoma 4x4 if so is the lift heights the same?
    81. 0 votes
      Q does this product fit on 2017 tacoma 4x4 if so is the lift heights the same? answer now
      A Yes, it will fit for 1-1,5'' rear lift
    82. I am planning on pairing these ICON aal's with the Toytec BOSS 2.0 coilovers and shocks , will it work, and is there any other hardware required? 2017 trd sport.
    83. 0 votes
      Q I am planning on pairing these ICON aal's with the Toytec BOSS 2.0 coilovers and shocks , will it...... Read more answer now
      A It will work, longer rear shocks will be required * * * https://suspensionlifts.com/shop/toyota-tacoma/2005-2015/shocks-05-15/toytec-boss-rear-shocks-2005-2014-tacoma-00-06-tundra/
    84. What shims do you recommend with this setup for the rear of my 2015 Tacoma 4 door long bed 4x4, installing the billstein 6112 strut and springs in the front as well as the billstein 5160's in the rear with this icon 1.5" add a leaf. The front springs are adjustable from 0.5" - 2.75" from factory height. I plan on running the truck level. Should I shim the rear 1 degree or 2 degree ?
    85. 0 votes
      Q What shims do you recommend with this setup for the rear of my 2015 Tacoma 4 door long bed 4x4, i...... Read more answer now
      A If your truck will be leveled at 1,5'' lift 2 degree shims can be recommended if you almost all the time drive empty truck

    Send me a notification for each new answer.

    -

    Original price was: $227.95.Current price is: $205.16.

    More than 30 available

    More than 30 available

    1-3 Day Transit Time