Generic filters
Exact matches only
Archives

on

Bilstein 5112 2″ Front Lift Levelling Kit (Shocks + front lift coil springs) & 5100 0-1″ Rear Lift Shocks 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 Ford F-350 Super Duty 4WD

Need the kit with Steering Stabilizer? Bilstein 5112 2" Front and Rear Levelling Lift Kit with B8 5100 Steering Stabilizer for 2008-2016 Ford F250 4WD

2” lift Front Coil Springs

Front Shocks + Coils:

Series: 5112

Front Extended Length(in):

Front Collapsed Length(in):

Part Number: F4-SE5-C765-H0 (front shocks – 24-186018)

Front Shocks Fitment Notes:

Rear Shocks:

Series: 5100

Rear Extended Length(in): 29.7

Rear Collapsed Length(in): 18.04

Part Number: 24-186025

Rear Shocks Fitment Notes:

Fitment: Bilstein 5112 2″ Front Lift Levelling Kit & 5100 0-1″ Rear Lift Shocks 05-’16 Ford F-350 Super Duty 4WD

Important fitment notes: 
Includes Shocks exactly as pictured

23161

on

The height is different on 4th gen 4Runners, some of them sit at 18 inches, some at 18.5 and some at 19 inches, the rear is 21 inches on these vehicles. The 112-620 springs provide about 2.5 inches of lift on the front end on 4Runners 2003-2009 and also let’s keep in mind that some of them are 8 cylinder engines and are a little heavier than a V6 so a lift can be different. We always advise clients to measure the stock height on these 4Runners before lifting the vehicle so that way we know exactly how much lift the vehicle requires to level it or lift it.

We’ve seen many many cases where the client cranks the front and ends up at 5 inches just to level the vehicle with the rear just to level it after a 2 inch lift on the rear. It is not recommended to have more then 3” of front lift.

Alignments specs:
Caster is 3 to 3.5 degrees and not more than 4
Camber is factory spec
Toe is factory as well

on

OME Brake Line and ABS Wire Bracket Relocation Kit for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Toyota Tundra

Part: FK32

  • Recommended for use when installing OME Dakar Springs, part # CS055R
  • Fit Kit includes brake hose and ABS sensor wire relocation brackets that will prevent the factory components from being stretched too tight (or damaged) when the suspension is fully extended.
2671