Generic filters
Exact matches only
Archives

on

KING 2.5 Performance Rear Shocks For 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 Ford F-150 4WD (7/8″ Shaft)

Part: 25001-214

  • 2.5” Steel Body with Cadmium Plating
  • Large High Strength 7/8” Hard Chrome Shafts Micro Polished for Seal Life
  • Strong Aircraft Aluminum Body Caps/Eyelets
  • Teflon Lined Spherical Bearings for Long Life
  • Vehicle Specific Application (Stock Easy Mounting)
  • Fully Serviceable/Rebuildable
  • Made in the USA
  • 0-1″ rear lift

DESCRIPTION

King’s new line of Original equipment manufacturer, (OEM), shock upgrade kits provide a bolt on suspension system that elevates your on and off-road performance to unmatched levels. Each kit has been subjected to punishing real world testing to develop the optimal damping curves and spring rates for your vehicle. Built with the same quality of materials and precise tolerances found on our high end race shocks our OEM upgrade kits enable you to experience the famous King ride quality on your daily driver or prerunner.

Built with race winning design features our kits come complete and provide simple 100% bolt on installation with no cutting or welding done to your vehicle. Our front kits provide an adjustable ride height and up to a 25% increase in wheel travel. Rear kits typically allow a 15% travel increase. Large 2.5″ diameter shock bodies and external reservoirs dramatically increase fluid capacity and heat dissipation to provide sustained damping performance even under the most punishing conditions. Our OEM upgrade shocks feature the same serviceable design that allows for valve adjustments with simple hand tools just like our race shocks.

Our experienced shock technicians are a phone call away to help should any questions arise during installation or use. Our kits are available ready to bolt into stock vehicles or with custom lengths for vehicles running lifted aftermarket suspensions. Once you ride on Kings you will know there really is a difference. Nothing rides like a King.

SPECS

Shock Type: Piggy Back

Shock Diameter: 2.5”

Shaft Size: 7/8” (.875”)

Mounting Type: Stock Type

1575

on

King 2.5 Performance 2-3.5″ Lift Front Coilovers For 2004, 2005, 2006, 2007, 2008 Ford F-150 4WD (7/8″ Shaft)

Part: 25001-167

  • 2.5” Steel Body with Cadmium Plating
  • Large High Strength 7/8” Hard Chrome Shafts Micro Polished for Seal Life
  • Strong Aircraft Aluminum Body Caps/Eyelets
  • Teflon Lined Spherical Bearings for Long Life
  • Vehicle Specific Application (Stock Easy Mounting)
  • Fully Serviceable/Rebuildable
  • Made in the USA

DESCRIPTION

King’s new line of Original equipment manufacturer, (OEM), shock upgrade kits provide a bolt on suspension system that elevates your on and off-road performance to unmatched levels. Each kit has been subjected to punishing real world testing to develop the optimal damping curves and spring rates for your vehicle. Built with the same quality of materials and precise tolerances found on our high end race shocks our OEM upgrade kits enable you to experience the famous King ride quality on your daily driver or prerunner.

Built with race winning design features our kits come complete and provide simple 100% bolt on installation with no cutting or welding done to your vehicle. Our front kits provide an adjustable ride height and up to a 25% increase in wheel travel. Rear kits typically allow a 15% travel increase. Large 2.5″ diameter shock bodies and external reservoirs dramatically increase fluid capacity and heat dissipation to provide sustained damping performance even under the most punishing conditions. Our OEM upgrade shocks feature the same serviceable design that allows for valve adjustments with simple hand tools just like our race shocks.

Our experienced shock technicians are a phone call away to help should any questions arise during installation or use. Our kits are available ready to bolt into stock vehicles or with custom lengths for vehicles running lifted aftermarket suspensions. Once you ride on Kings you will know there really is a difference. Nothing rides like a King.

Kit allows for 2-3.5” Lift and 33” tall tires

SPECS

Shock Type: Coil Over w/Remote Reservoir

Shock Diameter: 2.5”

Shaft Size: 7/8” (.875”)

Mounting Type: Stock Type

929

on

KING 2.5 Performance 0-2″ Lift Front Shocks For 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Jeep Wrangler TJ (7/8” Shaft)

Part: 25001-160

  • 2.5” Steel Body with Cadmium Plating
  • Large High Strength 7/8” Hard Chrome Shafts Micro Polished for Seal Life
  • Strong Aircraft Aluminum Body Caps/Eyelets
  • Teflon Lined Spherical Bearings for Long Life
  • Vehicle Specific Application (Stock Easy Mounting)
  • Fully Serviceable/Rebuildable
  • Made in the USA

DESCRIPTION

King’s new line of Original equipment manufacturer, (OEM), shock upgrade kits provide a bolt on suspension system that elevates your on and off-road performance to unmatched levels. Each kit has been subjected to punishing real world testing to develop the optimal damping curves and spring rates for your vehicle. Built with the same quality of materials and precise tolerances found on our high end race shocks our OEM upgrade kits enable you to experience the famous King ride quality on your daily driver or prerunner.

Built with race winning design features our kits come complete and provide simple 100% bolt on installation with no cutting or welding done to your vehicle. Our front kits provide an adjustable ride height and up to a 25% increase in wheel travel. Rear kits typically allow a 15% travel increase. Large 2.5″ diameter shock bodies and external reservoirs dramatically increase fluid capacity and heat dissipation to provide sustained damping performance even under the most punishing conditions. Our OEM upgrade shocks feature the same serviceable design that allows for valve adjustments with simple hand tools just like our race shocks.

Our experienced shock technicians are a phone call away to help should any questions arise during installation or use. Our kits are available ready to bolt into stock vehicles or with custom lengths for vehicles running lifted aftermarket suspensions. Once you ride on Kings you will know there really is a difference. Nothing rides like a King.

SPECS

Shock Type: Remote Reservoir

Shock Diameter: 2.5”

Shaft Size: 7/8” (.875”)

Mounting Type: Stock Type

540

on

KING Universal 2.5″ Air Bump Stop 4″ Travel (1 5/8″ Shaft)

Part: BS2540

  • 2.5” Steel Body with Cadmium Plating
  • Large High Strength 1 5/8” Hard Chrome Shafts Micro Polished for Seal Life
  • Strong Aircraft Aluminum Components
  • Universal Application (Non-Vehicle Specific)
  • Fully Serviceable/Rebuildable
  • Made in the USA

DESCRIPTION

King bump stops provide an additional level of bottoming control when you are using every bit of suspension travel available. We offer 2.0 and 2.5 inch diameter bodies with stroke lengths from 2 to 4 inches to fit any mounting location requirements and handle any suspension arresting loads. Our 4130 Chromoly mounting sleeves are precision machined to size and offer a secure and sturdy mount without pinching the bump stop body. Our unique Schrader cover mounts to the housing not the Schrader valve itself to protect it and acts as a double seal to keep dust and moisture out. Our bump stops contain a unique piston design that offers superior flow characteristics and the same quality micro polished shafts and advanced seal technology as our race shocks. Our long wearing nylon contact pad insures quiet operation and mounts with a simple yet effective single bolt design.

King bump stops help you use all the suspension travel you have to get the most out of your vehicle. They are easily tuned and serviced with simple hand tools. You really need to experience the comfort and control a set of King bump stops provide. Nothing rides like King.

SPECS

Shock Type: Air Bumpstop

Shock Diameter: 2.5”

Shock Travel: 4.0”

Shaft Size: 1 5/8” (1.625”)

Mounting Type: Bracket

929