Generic filters
Exact matches only
Archives

on

SuperLift 2.5″ Lift Kit for 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Jeep Cherokee XJ 4WD and 2WD

Part: K369

  • Tubular front lower control arms correct caster
  • Rear lift is achieved via add-a-leaf
  • Superide shock absorbers included
  • Lifetime Warranty
  • Satisfaction Guarantee

Tire and Wheel Info

31 x 10.50″ tire with standard offset wheel

IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate.

Actual dimensions of a given tire size can vary considerably from one brand to another.

Manufacturers’ wheel offset and backspacing measurement points are not always consistent.

Backspacing greatly impacts tire-to-fender clearance when turning.

Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent.

Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.

Installation Notes

If equipped with light duty double offset joint front driveshaft (rubber boot at transfer case end), It must be replaced with Spicer type as used on 4.0 liter in-line 6 cylinder models.

Installation Instructions

Fitment Table

Year Range Make Model Drivetrain Engine Cab
1984-2001 Jeep Cherokee (XJ) 2WD
1984-2001 Jeep Cherokee (XJ) 4WD
2624

on

SuperLift 2.5″ Lift Kit for 1986, 1987, 1988, 1989, 1990, 1991 Jeep Comanche Pickup MJ 2WD and 4WD

Part: K370

  • Tubular front lower control arms correct caster
  • Rear lift is achieved via add-a-leaf
  • Superide shock absorbers included
  • Lifetime Warranty
  • Satisfaction Guarantee

Tire and Wheel Info

31 x 10.50″ tire with standard offset wheel

IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate.

Actual dimensions of a given tire size can vary considerably from one brand to another.

Manufacturers’ wheel offset and backspacing measurement points are not always consistent.

Backspacing greatly impacts tire-to-fender clearance when turning.

Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent.

Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.

Installation Notes

If equipped with light duty double offset joint front driveshaft (rubber boot at transfer case end), It must be replaced with Spicer type as used on 4.0 liter in-line 6 cylinder models.

Installation Instructions

Fitment Table

Year Range Make Model Drivetrain Engine Cab
1986-1991 Jeep Comanche Pickup (MJ) 2WD
1986-1991 Jeep Comanche Pickup (MJ) 4WD
1376

on

SuperLift 2.5″ Lift Kit for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 Jeep Wrangler JK 4 Door

Part: K931

  • Compatible with factory Electronic Stability Control
  • Wheelbase specific coil springs rated for 2 or 4-Door models
  • Sway bar link and brake line relocation brackets includedFits both left and right hand drive models
  • Realignment plates restore proper steering (caster) alignment
  • Superide Shocks included
  • Limited Lifetime Warranty
  • Satisfaction Guarantee

Tire and Wheel Info

33 to 35 x 12.50 tires on a 17″ or larger wheel with up to factory backspacing.

IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate.

Actual dimensions of a given tire size can vary considerably from one brand to another.

Manufacturers’ wheel offset and backspacing measurement points are not always consistent.

Backspacing greatly impacts tire-to-fender clearance when turning.

Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent.

Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.

Installation Notes

Compression Dampener Kit #5714 required to prevent tire/fender scrub during full articulation with 35” diameter tires.

Installation Instructions

Product Overview

Looking for a moderate amount of lift, room for up to 35’s and factory like ride and handling?

Superlift’s 2.5” lift for the Jeep Wrangler JK is the ultimate combination of performance and value. Pre-set replacement coil springs minimize settling, provide exceptional ride quality and the rear coils are rate specific for 2 or 4 door models. Front sway bar relocation brackets, brake hose relocation brackets and alignment shims are included to ensure worry-free operation whether your pounding the trails or heading to the office.

The kit is packaged complete with Superlift Superide shocks

Options include: An adjustable front track bar, for right or left hand drive models, an adjustable rear track bar (left hand drive models only), an extended compression stop kit and high-clearance single and high-clearance dual steering stabilizers. Each stabilizer design is available with Superlift Superide or SS series cylinders by Bilstein.

NOTE: Optional compression stop kit is recommended for aggressive off-road use with 35” tires

Fitment Table

Year Range Make Model Drivetrain Engine Cab
2007-2014 Jeep Wrangler (JK) 4WD 4-Door
8225

on

SuperLift 2.5″ Lift Kit for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 Jeep JK 2 Door

Part: K932

  • Compatible with factory Electronic Stability Control
  • Wheelbase specific coil springs rated for 2 or 4-Door models
  • Sway bar link and brake line relocation brackets includedFits both left and right hand drive models
  • Realignment plates restore proper steering (caster) alignment
  • Superide Shocks included
  • Limited Lifetime Warranty
  • Satisfaction Guarantee

Tire and Wheel Info

33 to 35 x 12.50 tires on a 17″ or larger wheel with up to factory backspacing.

IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate.

Actual dimensions of a given tire size can vary considerably from one brand to another.

Manufacturers’ wheel offset and backspacing measurement points are not always consistent.

Backspacing greatly impacts tire-to-fender clearance when turning.

Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent.

Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.

Installation Notes

Compression Dampener Kit #5714 required to prevent tire/fender scrub during full articulation with 35” diameter tires.

Installation Instructions

Product Overview

Looking for a moderate amount of lift, room for up to 35’s and factory like ride and handling?

Superlift’s 2.5” lift for the Jeep Wrangler JK is the ultimate combination of performance and value. Pre-set replacement coil springs minimize settling, provide exceptional ride quality and the rear coils are rate specific for 2 or 4 door models. Front sway bar relocation brackets, brake hose relocation brackets and alignment shims are included to ensure worry-free operation whether your pounding the trails or heading to the office.

The kit is packaged complete with Superlift Superide shocks

Options include: An adjustable front track bar, for right or left hand drive models, an adjustable rear track bar (left hand drive models only), an extended compression stop kit and high-clearance single and high-clearance dual steering stabilizers. Each stabilizer design is available with Superlift Superide or SS series cylinders by Bilstein.

NOTE: Optional compression stop kit is recommended for aggressive off-road use with 35” tires

Fitment Table

Year Range Make Model Drivetrain Engine Cab
2007-2014 Jeep Wrangler (JK) 4WD 2-Door
1577