Generic filters
Exact matches only
Archives

on

ICON 2.5″ Front Lift Dual Rate Coil Springs Kit for Dodge Ram 2500/3500 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 4WD

2003-2013 Dodge Ram 2500 / 2003-2012 Dodge Ram 3500 Non Radius Arm Models

Lifted height specs based on diesel engine. Gas engine will bring slightly taller lift heights.

Part: 212500

Overview:

The ICON Vehicle Dynamics 2.5″ Dual Rate Spring System for (’03-’13) Ram 2500 / (’03-’12) 3500 4WD levels out your truck and offers you both incredible ride quality and performance. This 2.5″ dual rate spring system offers an initial soft ride zone with an aggressive 2nd rate to help prevent bottoming out. These ICON springs have a dual stage powder coat process to help prevent corrosion and are shot peened and pre-set to prevent sagging. Also included are longer urethane bumpstops that have a more progressive bottom out, and sway bar drop brackets to compliment the additional travel. Front shocks are required for complete INSTALLATION and we offer 2.0 Aluminum Series smooth body and Remote Reservoir, or our 2.5 Series Reservoir shock with or without CDC (compression damping contol) Valve. All ICON shocks are engineered to be the correct length offering maximum droop and compression travel, then tuned to work hand in hand with these springs for the best available on and offroad performance.

Key Features:

• ICON engineered dual rate coil springs

• Increased wheel travel and ride quality over stock

• No change in towing capacity

• Level stance front to rear

• Less body roll than stock

• No drive shaft modifications needed

• Made in the USA

Options:

216521      2.0 Aluminum Series Smooth Body Front Shocks

216522      2.0 Aluminum Series Smooth Body Rear Shocks

216521R    2.0 Aluminum Series Remote Reservoir Front Shocks

216522R    2.0 Aluminum Series Remote Reservoir Rear Shocks

217800P      2.5″ V.S. Series Remote Reservoir Front Shocks (Pair)

217701P      2.5″ V.S. Series Piggyback Reservoir Rear Shocks (Pair)

217800CP    2.5″ V.S. Series CDCV Remote Reservoir Front Shocks (Pair)

217701CP    2.5″ V.S. Series CDCV Piggyback Reservoir Rear Shocks (Pair)

214026      6061 Billet Upper & Lower Link Kit

214027      Steel Upper & Lower Link Kit

Tech Info:

• 4WD Applications Only

ICON 2.5" Lift Front 2.0 Aluminum Series Shock for 2003-2012 Ram 2500/3500 HD, ICON 0-3" Lift Rear 2.0 Aluminum Series Shock for 2003-2013 Ram 2500/3500 HD, ICON 2.5" Lift Front 2.0 Aluminum Series Shock for 2003-2012 Dodge Ram 2500/3500 HD, ICON 0-3" Lift Rear 2.0 Aluminum Series Remote Reservoir Shock for 2003-2013 Ram 2500/3500 HD, ICON 2.5" Lift Front V.S. 2.5 Series Remote Reservoir Shocks for 2003-2010 Dodge Ram 2500/3500, ICON 2-3" Lift Rear V.S. 2.5 Series PBR Shocks for 2003-2012 Ram 2500/3500 HD, ICON 2.5" Lift Rear V.S. 2.5 Series RR w/CDCV Shocks for 2003-2010 Dodge Ram 2500/3500, ICON 2-3" Lift Rear Piggyback Reservoir CDCV Shocks for 2003-2012 Ram 2500/3500, ICON Front Tubular Steel Upper, Lower Links for 2003-2010 Dodge Ram 2500

5630

on

ARB / OME lift kit for 2010, 2011, 2012, 2013, 2014 Toyota FJ Cruiser

Part: OME-FJ210

Need them Assembled? OME 2″ Lift Kit with Assembled Coilovers for 2010-2014 Toyota FJ Cruiser

The relationship between vehicle weight and suspension is where Old Man Emu gets its name – the emu is a large Australian flightless bird, when it runs, its powerful legs absorb most of the impact, allowing it to move over all types of terrain while its body remains virtually motionless. This is what Old Man Emu strives to achieve with its range of fully integrated 4×4 shocks and suspension systems. Old Man Emu suspension systems include carefully matched spring and shock combinations engineered to improve vehicle ride, handling and control under various loads.

This kit has been specifically designed for your 2010-2014 Toyota FJ Cruiser and has been proven in the harsh conditions of the Australian Outback.

  • OME 4007 coils (new generation ARB/OME coils)
  • Provides a consistent 2″ lift tailored for varying weight setups
  • Select your setup:
    • Stock Weight 2″ Lift (Clip 2/1)
    • Alloy Bull Bar Only 2″ Lift (Clip 3/2)
    • Steel Bull Bar Only 2″ Lift (Clip 4/3)
    • Bull Bar & Winch 2″ Lift (Clip 5/4)
    • Bull Bar, Winch & Accessories 2″ Lift (Clip 5)

Rear coils: Choose one option in dropdown:

  • OME 2895E: Light load 1.5 inch lift coils. Uses 60080 rear shocks
  • OME 2889: Medium 2.5 – 3 inch lift coils: Uses 60080 rear shocks
  • OME 2898: 440 lbs Constant Load Heavy 2.5 – 3 inch lift coils. Uses 60080 rear shocks

Includes 93010 (old: 90010) Nitrocharger Sport Front Shocks and (1) OME Trim Packer to be installed on the driver side front.

NOTE: Med and Heavy coils are rated to handle additional weight from aftermarket bumpers, winches, and accessories and should NOT be used without stated weight already in or installed at all times. All lift figures are based on averages.

13126

on

4.5-5″ RCD Suspension with Bilstein 5100’s / Lift Kit for 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 Toyota Tacoma 2WD / 4WD

Part: 10-47405

RCD 4-6 inch lift kit for Toyota Tundra 2007-2014 Diagram

 

Features:

  • Precision made extended length steering knuckles are standard in all RCD Suspension IFS Systems
  • Heavy duty-two piece lower sub-frame assemblies complimented by 304 stainless steel “Twin-Link” anti-compression struts ensure structural strength and durability
  • Oversize steering knuckles add strength and durability to your lifted truck
  • CAD Engineered designs maintain OEM A-arms, ball joints, and hardware ensuring long life and ease of serviceability anywhere in the world
  • Unique “Gator Black” polyurethane powder coat finish for lasting good looks
  • Grade 8 hardware for added strength and reliability
  • Precision CNC machining ensures exact fitment and precise tolerances
  • Custom tuned Bilstein 5100 Series monotube gas shocks provide unmatched ride quality and performance, and are standard on all RCD Suspension Systems
  • Built-in modified steering geometry maintains factory linkage components and minimized bump steer

Fits Up To A 33″ x 12.50 Tire w/ a 4.5″ Backspacing

by Race Car Dynamics

The kit was built around 17×8″ with 4.5″ of backspacing. 16” rims will not work

Download 10-47405 Instruction Sheet

6467