Generic filters
Exact matches only
Archives

on

Synergy Off-Road Vehicle Recovery Kit for 2007-2018 Jeep Wrangler JK

Part: Syn_2019

Introducing the ultimate off-road vehicle recovery kit – your lifeline when the going gets tough! Compiled with safety at the forefront, this kit is your ticket to conquer any terrain with confidence and peace of mind. Equipped with heavy duty straps, rugged soft shackles, and greaseable snatch block, you’ll have the muscle to pull your (or your buddy’s) vehicle out of the deepest mud pits or the loosest sand dunes. Weather you are a seasoned off-road veteran or a weekend warrior, our recovery kit is your trusted companion for every adventure. Don’t let anything hold you back – gear up and hit the trails with confidence with Synergy!

Includes:

  • (1) 30Ft x 2.4″ – 8 Ton, Nylon Snatch Strap
  • (1) 20Ft x 2.4″ –  8 Ton, Nylon Snatch Strap
  • (1) 10Ft x 3″ – 12 Ton, polyester Tree Saver Strap
  • (1) 8 Ton Greaseable Snatch Block
  • (2) 4.75 Ton Bow Shackles (D-rings)
  • (2) 14 Ton Soft Shackles with protective Sleeves
  • (1) HD Recover Gear Bag
  
Prop. 65 Warning for California ResidentsMore information: www.p65warnings.ca.gov
3

on

Synergy High Clearance Front Long Arm Brackets Front for 2018+ Jeep Wrangler JL/JLU, 2020+ Jeep Gladiator JT

Part: Syn_8891-03

The Synergy High Clearance Front Long Arm Brackets are the ultimate solution for enhanced off-road performance and articulation for your Jeep Wrangler JL / JLU / JT. Engineered with precision and durability in mind, our long arm kit offers increased suspension articulation and stability while maximizing your ground clearance. Crafted from 1/4″ Grade 50 A-570 laser cut plate steel, our long arm brackets provide superior strength and reliability allowing you to conquer challenging trails with confidence. This high strength steel prevents the brackets from becoming deformed when subject to extreme trail abuse. Unlock the full potential of your Jeep with this long arm kit and experience smoother rides and better control! 

Benefits:

  • Fixes caster change, anti-dive, and roll axis geometry issues inherent with short arm systems
  • The kit is 100% bolt on but can also be welded if preferred
  • Long Arm Brackets will work with any lift height
  • High clearance bracket design
  • Sold in pairs

Features:

  • Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
  • Frame brackets are manufactured with high strength crush resistant 1/4″ Grade A-570 laser cut plate

Notes:

  • Requires cutting and grinding of the frame
  • Jeep JL 392 will need to pull the exhaust to get the upper control arm bolts in and out
  • Gas tank relocation required on 2 door JL
  • Professional alignment to be done after install

pdf-icon.gifInstallation Instructions

Prop. 65 Warning for California ResidentsMore information: www.p65warnings.ca.gov
6

on

Synergy Heavy Duty Adjustable Front Track Bar for 2005+ Ford Super Duty F-250/F-350/F-450/F-550/F-600

Part: Syn_7675-02

Our Synergy 2005+ Ford Super Duty F-250 / F-350 / F-450 / F-550 / F-600 Heavy Duty Adjustable Front Track Bar is a critical final component to your new suspension lift and steering upgrade. Manufactured from 1.75″ USA made DOM steel, this track bar significantly improves lateral stiffness over stock and is considerably stronger to hold up to the abuse of large tires and aggressive off road driving.
With our Double Adjuster Sleeve and Pinch Bolt Assembly, this track bar is fully adjustable while installed in the vehicle making fine-tuning a breeze! Centering your axle after installing a suspension lift is critical to correcting your suspension and steering geometry, ensuring ideal vehicle handling and a safe ride. Pair this adjustable track bar with Synergy’s Heavy Duty Drag Link and Tie Rod to bulletproof your steering and guarantee product compatibility from stock height to 4 inches of lift.
Fitments:
Part # Fitment
7675-01 2005 – 2016 Ford Super Duty F-250 / F-350
2005+ Ford Super Duty F-450 / F-550 / F-600
7675-02 2017+ Ford Super Duty F-250 / F-350
Benefits:
Heavy duty 1.75″ x 0.188 wall USA made DOM offers improved strength over stock and provides a stronger connection to the road, preventing unwanted vehicle wandering and unnecessary axle movement
Centers the axle after installing a suspension lift to ensure proper suspension geometry, smooth handling, and consistent tire wear
Maintenance free Synergy Dual Durometer Bushings isolate noise and vibrations to provide a quiet, smooth ride
Fully adjustable without removing from the vehicle with our Synergy Double Adjuster Sleeve and Pinch Bolt Assembly
Synergy metal on metal HD axle side ball joint (applicable to 2017+ models) offers a solid connection to the axle and isolates any unwanted play or vibrations
No jam nuts that are impossible to keep tight
Compatible with stock steering components, wheels and tires
Bolts right to factory mounting locations with no modification necessary
Features:
Engineered and precision bent from USA made 1.75″ x 0.188 wall DOM tubing for maximum strength
Two stage abrasion resistant powder coat finish for maximum durability and corrosion resistance
Retains factory mounting locations and mounting hardware
Synergy Dual Durometer Bushings with Teflon Bearing surface for a maintenance free design focusing on performance, articulation, longevity, and ride quality
Synergy Double Adjuster Sleeve and Pinch Bolt Assembly eliminates jam nuts and allows for easy adjustability
Synergy Heavy Duty Metal on Metal Duty Ball Joint applicable to 2017+ models
100% bolt-in components assures and easy, trouble free installation with the use of basic hand tools
Min/Max Length:
Measured in a straight line from center of bolt hole to center of bolt hole
Min collapsed length: 36.375″
Max extended length: 37.75″
Includes:
7675-01 7675-02
(1) Synergy Heavy Duty Track Bar
(1)3622-12-12-PL – Double Adjuster Sleeve
(1) 4327-02 – Dual Durometer Track Bar Bushing
(1) 7675-10 – Super Duty Slug Adapter (1) Synergy Heavy Duty Track Bar
(1) 3622-12-12-PL – Double Adjuster Sleeve
(1) 4327-02 – Dual Durometer Track Bar Bushing
(1) 7675-11 – Super Duty Track Bar Heavy Duty Ball Joint
Notes:
Compatible on vehicles up to 4″ ride height
Compatible with both our Synergy Heavy Duty Steering Kit and the stock Super Duty steering components
Synergy High Performance Grease part number 4119 recommended
Compatibility not guaranteed on all aftermarket diff covers
If your track bar was built before 10/2024 part number 8675-01, please refer to part number 4154-L for a replacement tie rod end
Installation Instructions
More information: www.p65warnings.ca.gov
9

on

Synergy Adjustable Rear Track Bar for 2021+ Ford Bronco

Part: Syn_7062-01

Our Synergy 2021+ Ford Bronco Adjustable Rear Track Bar is a critical component to correcting axle placement and achieving ideal suspension geometry after installing a suspension lift. Manufactured from 1.50″ USA made DOM steel, this track bar significantly improves lateral stiffness and strength over stock to hold up to the abuse of large tires and aggressive offroad driving. Equipped with the Synergy Replacement Double Adjuster Sleeve 1.25-12 Threads for 2007-2018 Jeep Wrangler JK and Pinch Bolt Assembly on one end, you don’t even need to remove this track bar from the vehicle to make adjustments! We even topped it off with our maintenance free Dual Durometer Bushings to prevent any unnecessary noise or vibrations and provide unmatched ride quality.

Fitments:

Part # Fitment
7062-01 2021+ Ford Bronco

Benefits:

  • Heavy duty 1.50″ x 0.250 wall USA made DOM offers improved strength over stock and provides a stronger connection to the road, preventing unwanted vehicle wandering and unnecessary axle movement
  • Centers the axle after installing a suspension lift to ensure proper suspension geometry, smooth handling, and consistent tire wear
  • Maintenance free Synergy Dual Durometer Bushings isolate noise and vibrations to provide a quiet, smooth ride
  • Fully adjustable without removing from the vehicle with our Synergy Replacement Double Adjuster Sleeve 1.25-12 Threads for 2007-2018 Jeep Wrangler JK and Pinch Bolt Assembly
  • No jam nuts that are impossible to keep tight
  • Bolts right to factory mounting locations with no modification necessary

Features:

  • Engineered and precision bent from USA made 1.50″ x 0.250 wall DOM tubing for maximum strength
  • Two stage abrasion resistant powder coat finish for maximum durability and corrosion resistance
  • Retains factory mounting locations and mounting hardware
  • Synergy Dual Durometer Bushings with Teflon Bearing surface for a maintenance free design focusing on performance, articulation, longevity, and ride quality
  • Synergy Replacement Double Adjuster Sleeve 1.25-12 Threads for 2007-2018 Jeep Wrangler JK and Pinch Bolt Assembly eliminates jam nuts and allows for easy adjustability
  • 100% bolt-in components assures and easy, trouble free installation with the use of basic hand tools

Min/Max Lengths:
Measured in a straight line from center of bolt hole to center of bolt hole

  • MAX EXTENDED LENGTH: 45.000″
  • MIN COLLAPSED LENGTH: 43.825″

Includes:

7062-01
(1) Synergy Rear Heavy Duty Adjustable Track Bar
(1) Double Adjuster Sleeve
(2) Dual Durometer Bushing Assemblies
(1) Grade 8 Hardware Kit

 

Notes:

Installation Instructions

Prop. 65 Warning for California ResidentsMore information: www.p65warnings.ca.gov
5