Generic filters
Exact matches only
Archives

on

Synergy Weld-On Front Track Bar Bracket for 2007-2018 Jeep Wrangler JK, 2018+ Wrangler JL, 2020+ Gladiator JT

Part: Syn_8812-05

Upgrade your suspension geometry with the Synergy Jeep JK / JKU / JL / JLU / JT Weld On Front Track Bar Bracket. Whether you’re tackling technical terrain or cruising pavement, this bracket is a must-have for dialing in precision handling and stability. Engineered for maximum strength and durability, this weld-on bracket securely locates your front axle to eliminate unwanted lateral movement and bump steer during suspension travel. Crafted from high-quality, USA-sourced steel, it’s built to handle the harshest environments and most demanding setups.

More than just a mount, this bracket raises your Jeep’s front roll center — a critical factor in reducing body roll and improving overall handling. By minimizing the leverage of lateral forces, it helps keep the chassis flatter through turns, ensuring enhanced tire contact, improved weight distribution, and a more confident, composed driving experience. Whether you’re building a trail rig, weekend warrior, or a daily-driven Jeep, the Synergy Weld-On Front Track Bar Bracket is the solid foundation your suspension system deserves!

Fitment:

Part # Fitment
8812-05 2007 – 2018 Jeep Wrangler JK / JKU
2018+ Jeep Wrangler JL / JLU
2020+ Jeep Gladiator JT

Benefits:

  • Significantly reduces body roll and improves stability, delivering more precise handling and a more predictable driving experience
  • Heavy duty weld on design integrates the bracket into the axle for unmatched strength, reliability, and peace of mind
  • Easily trimmed to fit a wide range of lift heights and several axle tube diameters
  • Relocating the track bar allows you to run the drag link in a high steer configuration to prevent bump steer and undesirable driving characteristics
  • Eliminates the weak OEM axle side mount, a common failure point under load, with a robust, trail-proven solution

Features:

  • Engineered and precision laser cut from 1/4″ steel
  • Two stage abrasion resistant powder coat finish for maximum durability and corrosion resistance
  • Weld on tabs for integrating steering assist rams and / or sway bar relocation tabs included

Includes:

  • (1) Weld on track bar relocation bracket
  • (2) Hydro assist mounting tabs
  • (1) Sway bar mounting tab

Notes:

pdf-icon.gifInstallation Instructions

Prop. 65 Warning for California ResidentsMore information: www.p65warnings.ca.gov
13

on

Synergy High Clearance Front Lower Control Long Arms for 2018+ Jeep Wrangler JL/JLU & 2020+ Jeep Gladiator JT

Part: Syn_8891-05

The Synergy High Clearance Front Lower Long Arms are the ultimate solution for enhanced off-road performance and articulation for your Jeep Wrangler JL / JLU. Engineered with precision and durability in mind, our long arm kit offers increased suspension articulation and stability while maximizing your ground clearance. Crafted from 1’4 wall 2″ DOM steel, our long arms provide superior strength and reliability allowing you to conquer challenging trails with confidence. Unlock the full potential of your Jeep with this long arm kit and experience smoother rides and better control!

Benefits:

  • Fixes caster change, anti-dive, and roll axis geometry issues inherent with short arm systems
  • Bolt on Kit! Bracket can be welded onto frame if preferred
  • Long Arms will work with any lift height
  • The arms will allow the use of OEM wheels with larger tires without the requirement of an additional wheel spacer
  • Arms are designed and manufactured to maximize ground clearance
  • Sold in pairs

Features:

  • Made from high quality crush resistant 2″ X .25 Wall 1026 DOM tubing
  • Synergy Dual Durometer Bushings (DDB) with Teflon® bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality.
  • Synergy Double Adjuster Sleeve & Pinch Bolt Assembly: allows for adjustment of control arm length without removing control arm mounting bolt
  • Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
  • 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools

Min / Max Length:

Measured in a straight line from center of bolt hole to center of bolt hole

  • MAX EXTENDED LENGTH: 35.75″
  • MIN COLLAPSED LENGTH: 34.375″

Includes:

  • (2) Dual Durometer Bushing (DDB) Flex Joints
  • (2) Front Long Arm Lower Control Arms
  • (2) Dual Durometer Bushing (DDB) Assemblies
  • (2) Pinch Bolts & Grade 8 Hardware
  • (2) Synergy Double Adjuster Sleeve

Notes:

  • 392 model may need the exhaust loosened to reach upper control arm bolts
  • Gas tank relocation required on 2 door JL
  • Long arm brackets require cutting and grinding on the frame
  • Recommended professional vehicle alignment to be performed after install

pdf-icon.gifInstallation Instructions

Prop. 65 Warning for California ResidentsMore information: www.p65warnings.ca.gov
6

on

Synergy Heavy Duty Front Tie Rod for 2005+ Ford Super Duty F-450/F-550/F-600

Part: Syn_7602-01

Synergy 2005+ Ford Super Duty F-450 / F-550 / F-600 Heavy Duty Tie Rod has all new, bolt in design with components specific to the Ford Truck Platform. Manufactured from 2″ x 0.25″ wall USA made DOM steel for maximum strength and featuring Synergy Heavy Duty Metal on Metal Tie Rod Ends, you will not find a better tie rod end on the market! There are no wheel size requirements, so it can be installed on a stock Super Duty with stock wheels and tires. We recommend pairing this tie rod with the Synergy Tuned Fox Steering Stabilizer and Stabilizer Clamp, however it is compatible with the factory stabilizer.

Fitment:

Part # Fitment
7602-01 2005+ Ford Super Duty F-450 / F-550 / F-600

 

Benefits:

  • Heavy duty steel is over 40% stronger than stock, improving steering feel and eliminating any chance of bending
  • Offers a more direct connection to the road compared to stock; no more bent tie rods and constantly having to align your vehicle
  • Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock and include grease fittings for ease of maintenance
  • Synergy Single Plane Tie Rod End eliminates unwanted tie rod flop and the steering dead-spot commonly encountered with hydro assist setups
  • Synergy Double Adjuster Sleeve allows adjustment of tie rod length without removing it from the vehicle
  • Compatible with stock wheels and tires and the factory stabilizer

Features:

  • Synergy HD Metal on Metal Tie Rod Ends with oversized 1 1/4 inch shank
  • Precision engineered and CNC formed From 2.0″  x 0.250 wall USA made DOM tubing
  • Abrasion-resistant powder coat finish for maximum durability and corrosion resistance
  • Both ends of the bar use pinch bolt assemblies instead of jam nuts to simplify installation and adjustment
  • 100% bolt-on components assures an easy, trouble free installation into the factory mount locations with the use of basic hand tools

Min/Max Length:
Measured in a straight line from center of tie rod end to center of tie rod end

  • Minimum collapsed length: 66.0″
  • Maximum extended length: 68.0″

Includes:

Notes:

pdf-icon.gifInstallation Instructions

Prop. 65 Warning for California ResidentsMore information: www.p65warnings.ca.gov
5

on

Synergy Dual Steering Stabilizer Kit Front with Fox IFP for 2003-2013 Ram 2500/3500

Part: Syn_98

The Synergy 2003-2013 Ram 2500 / 3500 Dual Steering Stabilizer Kit is designed to dampen the unruly directional steering and side to side movement that larger tires tend to create. Paired with our Synergy Tuned Steering Stabilizers, this dual stabilizer kit outperforms the competition and turns heads everywhere you go! Preventing bump steer and isolating steering wheel feedback, you can both heavy haul and cruise back roads with confidence. This is an ideal upgrade for folks that are running larger wheel and tire combinations, adding additional force to your steering components. Conveniently available either as a complete kit with dual Fox Steering Stabilizers or as the bracket and clamps only. Experience next level handling and steering performance with the reinforced steel bracket and dual steering stabilizers!
Fitment:
Part # Fitment Description
8510-02 2003 – 2013 Ram 2500 / 3500 Without Steering Stabilizers
8510-03 2003 – 2013 Ram 2500 / 3500 With Steering Stabilizers
Benefits:
Improves vehicle handling by dampening road vibrations, neutralizing bump steer, and calming the unruly side to side movement larger wheel and tire combinations can create
Inline mounted, opposing stabilizers neutralize the “push and pull” commonly associated with nitrogen charged stabilizers
Dual stabilizers provide maximum vibration suppression
Bolt on installation make it a simple, highly effective upgrade
Prevents uneven tire wear and extends the life of your steering components
Capped with our exclusive, stainless steel Synergy branding plate for endless curb appeal
Features:
Engineered, precision laser cut and CNC formed from 1/4″ USA made steel
Rigid MIG welded assembly
Two stage abrasion-resistant powder coat finish for maximum durability and corrosion resistance
100% bolt-on components assures an easy, trouble free installation with the use of basic hand tools.
Includes:
8510-02 8510-03
(1) 8510-01 – Dual Stabilizer Bracket
(2) 4050-50 – 1-1/2″ Stabilizer Clamps
(1) 8510-01 – Dual Stabilizer Bracket
(2) 4050-50 – 1-1/2″ Stabilizer Clamps
(2) 6401-01 – Synergy Tuned Fox Steering StabilizersNotes:
This kit was designed to be used with our Synergy Heavy Duty Tie Rod – 8568-21; We cannot confirm fitment with any other aftermarket tie rod options
Must be ran with 2″ of bump stop spacing – we recommend using Synergy Front Bump Stop Drops 8734-20
Recommended Fox Steering Stabilizers:
IFP – Internal Floating Piston 6401-01
TS – Through Shaft 6402-03
ATS – Adjustable Through Shaft 6403-03
Fox TS or ATS Stabilizers require the use of (2) Synergy TS / ATS Clamp Adapters 4051-01
4.75″ backspacing wheels or less required for use with TS and ATS stabilizers
Synergy 1-1/2″ Stabilizer Clamps 4050-50 are not required when running our recommended FOX TS & ATS Stabilizers
Installation Instructions

More information: www.p65warnings.ca.gov

8