Generic filters
Exact matches only
Archives

on

Synergy Front Caster Sleeves for 2005+ Ford Super Duty 4×4

The Synergy Ford Super Duty f-250 / F-350 caster sleeves are highly recommended when lifting or leveling your truck 2.5”. This ball joint Dana 60 sleeve shim provides 2.4 degrees of caster and -1 to +.4 degrees of camber. When leveling your Super Duty, the suspension geometry changes causing the factory spec caster to decrease. By installing these caster shims, the factory caster is restored to stock specifications. This helps maintain your steering return to center and overall factory steering feel.

Fitments:

  • 2005+ Ford Super Duty F-250 / F-350 

Benefits:

  • Restores a leveled trucks return to center on the steering wheel
  • Helps to minimize steering wander
  • Maintenance Free, no greasing required
  • No modifications required to install
  • Limited Lifetime Warranty

Features:

  • Made from high strength 1045 steel
  • Zinc plated for corrosion protection
  • Adds 2.4 degrees of Caster
  • Camber adjustable from -1 to +.4

Includes:

  • (2) Ford Super Duty Caster sleeves
  • (2) Cotter pins 

Notes:

  • Compatible with the 2.5 inch Leveling Kit
  • Only compatible with 4×4 front axle

pdf-icon.gifInstallation Instructions

Prop. 65 Warning for California ResidentsMore information: www.p65warnings.ca.gov
4

on

The Synergy Ford Super Duty F-250 / F-350 / F-450 / F-550 / F-600 front leveling springs lift the front of the truck 2.5”. The springs are progressively wound to provide a soft ride while increasing bottoming resistance. When used in the Synergy Leveling Kit, they provide 9 ¾“ of travel.

Fitments:

Part # Description
8663-25 Synergy 2005+ Ford Super Duty F-250 / F-350 / F-450 / F-550 / F-600 4×4 – Diesel
8664-25 Synergy 2005+ Ford Super Duty F-250 / F-350 4×4 – Gas

Benefits:

  • Increased bottoming resistance
  • Increased travel
  • Fits in stock location
  • No modifications required to install

Features:

  • Hot formed, made from 5160H spring steel 
  • Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
  • Proudly made in USA
  • Pre-Set. This means no spring sag for the life of the spring
  • Dual rate
  • Sold in Pairs

Notes:

  • Compatible with the 2.5 inch Leveling Kit
  • Only compatible with 4×4 front axle
  • Solid Height: 10 ¼“
  • Free Length: 22”
  • Not compatible with trucks equipped with Front Suspension Height Sensor. This sensor must be removed or the linkage arm lengthened, or damage may result.
Prop. 65 Warning for California ResidentsMore information: www.p65warnings.ca.gov
4

on

Synergy Brake Line Relocation Bracket for 2014+ Ram 2500

The Synergy 2014+ Ram 2500 Brake Line Relocation Bracket is highly recommended when lifting the rear of your truck. This relocation bracket moves the brake lines and ABS wires towards the front of the vehicle to allow clearance for the Synergy Adjustable Rear Track Bar (8765-01). This bracket allows you to keep your factory brake lines without impeding suspension components while flexing or at full bump. 

Fitments:

  • 2014+ Ram 2500

Benefits:

  • Allows for increased suspension droop
  • Relocates brake lines and ABS wire for suspension clearance

Features:

  • Laser cut and CNC bent 12 gauge HRPO steel construction
  • Zinc plated for corrosion protection

Includes:

  • (1) Ram 2500 Brake Line Relocation Bracket
  • (1) Brake line bracket hardware kit

Notes:

  • Only compatible with 2500 model

pdf-icon.gifInstallation Instructions

Prop. 65 Warning for California ResidentsMore information: www.p65warnings.ca.gov
7

on

The Synergy Ford Super Duty F-250 / F-350 / F-450 / F-550 / F-600 front leveling springs lift the front of the truck 2.5”. The springs are progressively wound to provide a soft ride while increasing bottoming resistance. When used in the Synergy Leveling Kit, they provide 9 ¾“ of travel.

Fitments:

Part # Description
8663-25 Synergy 2005+ Ford Super Duty F-250 / F-350 / F-450 / F-550 / F-600 4×4 – Diesel
8664-25 Synergy 2005+ Ford Super Duty F-250 / F-350 4×4 – Gas

Benefits:

  • Increased bottoming resistance
  • Increased travel
  • Fits in stock location
  • No modifications required to install

Features:

  • Hot formed, made from 5160H spring steel 
  • Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
  • Proudly made in USA
  • Pre-Set. This means no spring sag for the life of the spring
  • Dual rate
  • Sold in Pairs

Notes:

  • Compatible with the 2.5 inch Leveling Kit
  • Only compatible with 4×4 front axle
  • Solid Height: 10 ¼“
  • Free Length: 22”
  • Not compatible with trucks equipped with Front Suspension Height Sensor. This sensor must be removed or the linkage arm lengthened, or damage may result.
Prop. 65 Warning for California ResidentsMore information: www.p65warnings.ca.gov
2