Generic filters
Exact matches only
Archives

on

Synergy Jeep JL / JLU Stainless Braided Brake Line Kits are a must when equipping a vehicle with a lift and longer travel off road suspension. Longer lines ensure adequate slack during extreme articulation. Stainless lines offer a stiffer pedal feel for increased control and flexibilty to prevent breakage. Synergy’s stainless lines maintain OEM routing and brackets for proper clearances, and are DOT approved. These lines are included in our Stage 3 kits, and are recommended for all JL, JLU and JT’s up to a 4″ lift looking for maximum performance and minimal restriction to full wheel travel potential.

Fitments:

Part # Fitment Location Length
8866-03 Fits: 2018 – 2023 JL / JLU Wrangler, 2020+ Jeep JT Gladiator
 Front Lines Only 40.25″
8866-04 Fits: 2018 – 2023 JL / JLU Wrangler
 Rear Lines Only 29.625″
8866-01 Fits: 2018 – 2023 JL / JLU Wrangler
 Front and Rear Complete Kit –
8866-06 Fits: 2023+ JL 392 – COMING SOON! Rear Lines Only TBD
8866-07 Fits: 2023+ JL 392 – COMING SOON! Front and Rear Complete Kit –


Benefits:

  • Extends your brake lines from factory length to accommodate up to 4″ of lift
  • Flexible, DOT approved stainless steel brake lines resist corrosion and allow for full articulation without fear of breaking a hard line

Features: 

  • DOT Approved, High Quality Stainless braided lines
  • Includes mounting brackets and crush washers
  • M10x1.0 frame side and 10mm Banjo on caliper side
  • Sold as a pair

Includes:

(1) Driver Side Stainless Steel Braided Brake Line
(1) Passenger Side Stainless Steel Braided Brake Line

Notes

  • 8866-01 is a group part number that pulls quantity (1) 8866-03 and (1) 8866-04
  • We recommend all brake line installation be done by a professional mechanic / installer

Installation Instructions

Prop. 65 Warning for California ResidentsMore information: www.p65warnings.ca.gov
5

on

Synergy Jeep Gladiator JT Stainless Braided Brake Line Kits are a must when equipping a vehicle with a lift and longer travel off road suspension. Longer lines ensure adequate slack during extreme articulation. Stainless lines offer a stiffer pedal feel for increased control and flexibilty to prevent breakage. Synergy’s stainless lines maintain OEM routing and brackets for proper clearances, and are DOT approved. These lines are included in our Stage 3 kits, and are recommended for all JL, JLU and JT’s up to a 4″ lift looking for maximum performance and minimal restriction to full wheel travel potential.

Fitment:

Part # Fitment Location Length
8866-03
 2020+ JT Gladiator 
2018+ JL, JLU Wrangler		 Front Lines Only 40.25″
8866-05 2020+ Jeep JT Gladiator Rear Lines Only 25.25″
8866-02 2020+ JT Gladiator Front and Rear Complete Kit –

Benefits:

  • Extends your brake lines from factory length to accomodate up to 4″ of lift
  • Flexible, DOT approved stainless steel brake lines resist corrosion and allow for full articulation without fear of breaking a hard line

Features: 

  • DOT Approved, High Quality Stainless braided lines
  • Includes mounting brackets and crush washers
  • M10x1.0 frame side and 10mm Banjo on caliper side
  • Sold as a pair

Includes:

(1) Driver Side Stainless Steel Braided Brake Line
(1) Passenger Side Stainless Steel Braided Brake Line

Notes

  • 8806-01 is a group part number that pulls quantity (1) 8866-03 and (1) 8866-05
  • Compatability unknown with 2024 and 2025 model years
  • We recommend all brake line installation be done by a professional mechanic / installer

pdf-icon.gifInstallation Instructions

Prop. 65 Warning for California ResidentsMore information: www.p65warnings.ca.gov
6

on

Synergy Front Steering Box Bolt Kit for 2018+ Jeep Wrangler JL/JLU, 2020+ Jeep Gladiator JT

This bolt kit is required to install the Synergy Jeep JL / JLU / JT front track bar and sector shaft brace kit (# 8869-01) on your Jeep JL / JLU / JT with updated cast iron steering box. Due to Chrysler’s recent TSB# 08-074-20 REV. B, this hardware kit is required for vehicles using the updated (cast iron) steering box. If the vehicle features an aluminum steering box, then the factory steering gear box bolts are sufficient for securing the Synergy Jeep JL / JLU / JT front track bar and sector shaft brace kit (# 8869-01) to the frame rail of the vehicle. If the vehicle features a cast iron steering box, then the four factory steering gear box bolts are not sufficient due to their length, and will need to be replaced with this bolt kit.

Fitments:

  • 2018+ Jeep Wrangler JL / JLU
  • 20+ Jeep JT Gladiator

Features:

  • (4) 10.9 grade steel M12 – 1.50 x 120mm hex cap bolts with zinc finish
  • (4) 10.9 grade steel Washers 

Chrysler Technical Service Bulletin 08-074-20 REV. B

Prop. 65 Warning for California ResidentsMore information: www.p65warnings.ca.gov
11

on

Synergy Jeep Gladiator JT Stainless Braided Brake Line Kits are a must when equipping a vehicle with a lift and longer travel off road suspension. Longer lines ensure adequate slack during extreme articulation. Stainless lines offer a stiffer pedal feel for increased control and flexibilty to prevent breakage. Synergy’s stainless lines maintain OEM routing and brackets for proper clearances, and are DOT approved. These lines are included in our Stage 3 kits, and are recommended for all JL, JLU and JT’s up to a 4″ lift looking for maximum performance and minimal restriction to full wheel travel potential.

Fitment:

Part # Fitment Location Length
8866-03
 2020+ JT Gladiator 
2018+ JL, JLU Wrangler		 Front Lines Only 40.25″
8866-05 2020+ Jeep JT Gladiator Rear Lines Only 25.25″
8866-02 2020+ JT Gladiator Front and Rear Complete Kit –

Benefits:

  • Extends your brake lines from factory length to accomodate up to 4″ of lift
  • Flexible, DOT approved stainless steel brake lines resist corrosion and allow for full articulation without fear of breaking a hard line

Features: 

  • DOT Approved, High Quality Stainless braided lines
  • Includes mounting brackets and crush washers
  • M10x1.0 frame side and 10mm Banjo on caliper side
  • Sold as a pair

Includes:

(1) Driver Side Stainless Steel Braided Brake Line
(1) Passenger Side Stainless Steel Braided Brake Line

Notes

  • 8806-01 is a group part number that pulls quantity (1) 8866-03 and (1) 8866-05
  • Compatability unknown with 2024 and 2025 model years
  • We recommend all brake line installation be done by a professional mechanic / installer

pdf-icon.gifInstallation Instructions

Prop. 65 Warning for California ResidentsMore information: www.p65warnings.ca.gov
4