Generic filters
Exact matches only
Archives

on

Synergy Jeep JL / JLU Stainless Braided Brake Line Kits are a must when equipping a vehicle with a lift and longer travel off road suspension. Longer lines ensure adequate slack during extreme articulation. Stainless lines offer a stiffer pedal feel for increased control and flexibilty to prevent breakage. Synergy’s stainless lines maintain OEM routing and brackets for proper clearances, and are DOT approved. These lines are included in our Stage 3 kits, and are recommended for all JL, JLU and JT’s up to a 4″ lift looking for maximum performance and minimal restriction to full wheel travel potential.

Fitments:

Part # Fitment Location Length
8866-03 Fits: 2018 – 2023 JL / JLU Wrangler, 2020+ Jeep JT Gladiator
 Front Lines Only 40.25″
8866-04 Fits: 2018 – 2023 JL / JLU Wrangler
 Rear Lines Only 29.625″
8866-01 Fits: 2018 – 2023 JL / JLU Wrangler
 Front and Rear Complete Kit –
8866-06 Fits: 2023+ JL 392 – COMING SOON! Rear Lines Only TBD
8866-07 Fits: 2023+ JL 392 – COMING SOON! Front and Rear Complete Kit –


Benefits:

  • Extends your brake lines from factory length to accommodate up to 4″ of lift
  • Flexible, DOT approved stainless steel brake lines resist corrosion and allow for full articulation without fear of breaking a hard line

Features: 

  • DOT Approved, High Quality Stainless braided lines
  • Includes mounting brackets and crush washers
  • M10x1.0 frame side and 10mm Banjo on caliper side
  • Sold as a pair

Includes:

(1) Driver Side Stainless Steel Braided Brake Line
(1) Passenger Side Stainless Steel Braided Brake Line

Notes

  • 8866-01 is a group part number that pulls quantity (1) 8866-03 and (1) 8866-04
  • We recommend all brake line installation be done by a professional mechanic / installer

Installation Instructions

Prop. 65 Warning for California ResidentsMore information: www.p65warnings.ca.gov
5

on

When lifting the vehicle, either through tire size or suspension lift, the axle travel needs to be limited to prevent the possibility of tire interference. These rear bump stop spacers provide a solution to this interference problem by limiting the axle travel toward the frame.

Fitments:

  • Jeep Wrangler JK / JKU
  • Jeep Wrangler JL / JLU
  • Jeep Gladiator JT  
Part # Description
8858-20 2.0″ Jeep JK / JL / JT Rear Bump Stop Spacer Kit
8858-30 3.0″ Jeep JK / JL / JT Rear Bump Stop Spacer Kit
8858-40 4.0″ Jeep JK / JL / JT Rear Bump Stop Spacer Kit

Features:

  • Bump stops bolt onto the axle bump pad and provides 2″, 3″ or 4″ of bump stop spacing.
  • Manufactured from CNC laser cut 1/4” high carbon steel for superior durability and strength. 
  • Abrasion-resistant powder coat finish for maximum durability and corrosion resistance.
  • 100% bolt on components assure an easy, trouble free installation with the use of basic hand tools for JK and JL models.
  • Designed for perpendicular engagement when the rear axle pinion angle is adjusted for proper drive line angle.

Includes:

  • (2) Lower Rear Bump Stops
  • (1) Bump Stop Mounting Hardware Kit
  • (1) Drill Template for JT Axle Pads

Notes:

  • Direct bolt on application for JK / JL. Requires drilling 2 holes for JT model.

Installation Instructions
JT REAR BUMPSTOP DRILL TEMPLATE

Prop. 65 Warning for California ResidentsMore information: www.p65warnings.ca.gov
9

on

When lifting the vehicle, either through tire size or suspension lift, the axle travel needs to be limited to prevent the possibility of tire interference. These rear bump stop spacers provide a solution to this interference problem by limiting the axle travel toward the frame.

Fitments:

  • Jeep Wrangler JK / JKU
  • Jeep Wrangler JL / JLU
  • Jeep Gladiator JT  
Part # Description
8858-20 2.0″ Jeep JK / JL / JT Rear Bump Stop Spacer Kit
8858-30 3.0″ Jeep JK / JL / JT Rear Bump Stop Spacer Kit
8858-40 4.0″ Jeep JK / JL / JT Rear Bump Stop Spacer Kit

Features:

  • Bump stops bolt onto the axle bump pad and provides 2″, 3″ or 4″ of bump stop spacing.
  • Manufactured from CNC laser cut 1/4” high carbon steel for superior durability and strength. 
  • Abrasion-resistant powder coat finish for maximum durability and corrosion resistance.
  • 100% bolt on components assure an easy, trouble free installation with the use of basic hand tools for JK and JL models.
  • Designed for perpendicular engagement when the rear axle pinion angle is adjusted for proper drive line angle.

Includes:

  • (2) Lower Rear Bump Stops
  • (1) Bump Stop Mounting Hardware Kit
  • (1) Drill Template for JT Axle Pads

Notes:

  • Direct bolt on application for JK / JL. Requires drilling 2 holes for JT model.

Installation Instructions
JT REAR BUMPSTOP DRILL TEMPLATE

Prop. 65 Warning for California ResidentsMore information: www.p65warnings.ca.gov
6

on

Synergy Jeep Gladiator JT Stainless Braided Brake Line Kits are a must when equipping a vehicle with a lift and longer travel off road suspension. Longer lines ensure adequate slack during extreme articulation. Stainless lines offer a stiffer pedal feel for increased control and flexibilty to prevent breakage. Synergy’s stainless lines maintain OEM routing and brackets for proper clearances, and are DOT approved. These lines are included in our Stage 3 kits, and are recommended for all JL, JLU and JT’s up to a 4″ lift looking for maximum performance and minimal restriction to full wheel travel potential.

Fitment:

Part # Fitment Location Length
8866-03
 2020+ JT Gladiator 
2018+ JL, JLU Wrangler		 Front Lines Only 40.25″
8866-05 2020+ Jeep JT Gladiator Rear Lines Only 25.25″
8866-02 2020+ JT Gladiator Front and Rear Complete Kit –

Benefits:

  • Extends your brake lines from factory length to accomodate up to 4″ of lift
  • Flexible, DOT approved stainless steel brake lines resist corrosion and allow for full articulation without fear of breaking a hard line

Features: 

  • DOT Approved, High Quality Stainless braided lines
  • Includes mounting brackets and crush washers
  • M10x1.0 frame side and 10mm Banjo on caliper side
  • Sold as a pair

Includes:

(1) Driver Side Stainless Steel Braided Brake Line
(1) Passenger Side Stainless Steel Braided Brake Line

Notes

  • 8806-01 is a group part number that pulls quantity (1) 8866-03 and (1) 8866-05
  • Compatability unknown with 2024 and 2025 model years
  • We recommend all brake line installation be done by a professional mechanic / installer

pdf-icon.gifInstallation Instructions

Prop. 65 Warning for California ResidentsMore information: www.p65warnings.ca.gov
4