Generic filters
Exact matches only
Archives

on

Bilstein 0-2.6″ Front Lift Replacement 24-310055 Shock from 6112 kit (47-310049) for 2000, 2001, 2002, 2003, 2004, 2005, 2006 Toyota Tundra RWD

Part: 47-310049 (old: 47-243729)

Include 1 shock

Not recommended for Base submodels

Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.

Series: B8 6112
Drive Type: RWD
Position: Front
Quantity Per Vehicle: 1
Finish: Zinc Plated
Reservoir: No
Body Design: 60mm ID Snap Ring Grooved Body (Coilover)

Shocks Included in the 6112 kit: 24-310055 (qty 2)

Crew cab: 0-2.6″ Lift

Access cab: 1.25″-2.6″ Lift

Download Installation Instructions

3438

on

Bilstein B6 4600 Front Shocks For 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 Chevrolet Corvette

Part: 24-029759_24-029780

IMPORTANT NOTE: Not for Magnetic Ride Suspension. 

Bilstein B6 Performance dampers are a performance upgrade to OE dampers designed to be paired with the OE factory spring. These dampers offer application specific valve settings with a monotube design to bring out the best handling performance of a vehicle. Each damper is rigorously tested for quality that meets or exceeds OE standards. B6 Performance dampers will provide improved safety and handling performance with the added benefit of world-famous Bilstein quality.

Finish: Yellow Paint
Replacement Mounting Kit: B4-KT1-Z097A00

Notes:

Without Electronic Suspension

Rear Shocks:

Finish: Yellow Paint
Replacement Mounting Kit: B4-KT1-Z097A00

Notes:

  • Without Electronic Suspension
894

on

Bilstein B8 5100 (RHA) 0-2.3″ Front Lift Assembled Coilovers and 0-1.8″ Rear Lift Shocks for 2021, 2022, 2023, 2024, 2025 Chevrolet Suburban 1500 2WD/4WD

Part: 5100BILCS21CS

Enhance the ride quality and stance of your 2021-2025 Chevrolet Suburban 1500 2WD/4WD with the Bilstein B8 5100 (RHA) Lift Kit, featuring pre-assembled front coilovers and matching rear shocks. Engineered for improved control and comfort both on-road and off, this package provides up to 2.3″ of front lift and 1.8″ of rear lift, allowing clearance for larger tires while maintaining factory-like ride comfort.

The Ride Height Adjustable (RHA) 5100 Coilovers come pre-assembled for a simple drop-in installation, eliminating the need for spring compressors or extra assembly. Pairing with Bilstein’s rear 5100 monotube shocks ensures consistent damping and stability across all driving conditions.

Key Features:

  • Complete set: (2) front assembled coilovers + (2) rear lift shocks

  • Front lift: 0-2.3″ | Rear lift: 0-1.8″

  • Direct-fit for 2021-2025 Chevrolet Suburban 1500 (2WD/4WD)

  • Pre-assembled coilovers for hassle-free installation

  • Monotube gas pressure technology for fade-free performance

  • Zinc-coated shock bodies for superior corrosion resistance

  • Optimized for daily driving, towing, and light off-road use

Fitment:

  • 2021-2025 Chevrolet Suburban 1500 2WD

  • 2021-2025 Chevrolet Suburban 1500 4WD

Take your Suburban’s capability to the next level with the Bilstein B8 5100 (RHA) Coilovers and Shocks Kit—delivering lift, control, and reliability in one complete package.

502

on

Bilstein 6112 Assembled 1.3-3.6″ Front Coilovers with Rear 5100 Shocks for 2003, 2004, 2005, 2006, 2007, 2008, 2009 Toyota 4Runner 4WD

Part Number: 47-309975-ASB-SK

Upgrade your 4Runner’s suspension with a premium matched front & rear setup: Bilstein 6112 ride-height adjustable front coilovers paired with Bilstein 5100 series rear lift shocks — designed for the 2003-2009 Toyota 4Runner 4WD. This kit gives you the ability to raise the front between 1.3″ – 3.6″ while maintaining rear damping support with compatible lift shocks.

Key Features & Benefits

  • Front Coilover Kit (6112):
     • 60 mm monotube design with digressive piston for precise damping under load and terrain variations  BILSTEIN Off-Road+1
     • Adjustable spring seats supporting a front lift range up to ~3.6″ (depending on coil and setup)
     • Pre-assembled—ready to drop in (coil + shock + mounts)
     • Strong oil capacity and cooling due to large bore design  BILSTEIN Off-Road+1

  • Rear Lift Shocks (5100):
     • Designed for lifted/rear-lift applications (some 5100 kits for 4Runner support 0.5-2″ rear lift)  Shock Surplus+1
     • Monotube, digressive valving; retains stability and handling under lifted rear geometry
     • Compatible with many rear lift scenarios where shock length is similar to OEM lifted lengths  Shock Surplus

  • Balanced Kit Approach: Keeps damping harmonized front-to-back for better ride, handling, and overall control.

Fitment & Compatibility

Specification Details
Years Supported 2003, 2004, 2005, 2006, 2007, 2008, 2009
Drivetrain 4WD (All-Wheel Drive / Part-Time)
Front Lift Range ~1.3″ to ~3.6″ (via adjustable coilover)
Rear Lift Compatibility Best when rear shock length remains reasonably close to OEM or mild lift configuration (0.5-2″ typical)
OEM Coil Springs Depending on lift and usage, you may need upgraded front coils if you run heavy loads
Exclusions Vehicles with X-REAS or factory Adaptive Rear systems may need special tuning or parts not covered by this kit

Notes & Recommendations

  • Though you requested “1.3-3.6″” front lift, actual usable lift depends on coil spring rates, suspension geometry, bump stops, and clearance. Check full suspension travel after install.

  • Ensure rear shock length and travel match your rear lift and load conditions. Over-extending rear shocks can lead to binding or damage.

  • After install, always perform a full alignment (camber, toe, caster) to account for new geometry.

  • Verify clearance on fenders, brake lines, ABS sensor wiring before finalizing lift settings.

  • For heavier builds or overlanding gear, consider matching rear heavy-duty coil or load-support upgrades in conjunction with shocks.

4909