Generic filters
Exact matches only
Archives

on

Part: FPE-34772

All New! Fleece Performance stainless steel exhaust manifold stud kit for Cummins. Our exhaust manifold studs are produced from aged 603 stainless steel and feature a 4mm internal hex head for easy installation.

Impervious to rust and corrosion, these studs not only look good, but allow for higher clamping force and simplified manifold installation.

Features:

  • Higher Clamping Force (Torque to 40lbs using anti-seize)
  • Includes 12 point nuts and washers
  • Aged 603 Stainless Steel

Fitment:

  • Cummins 5.9L 12V (1994 – 1998) – Aftermarket exhaust manifold only
  • Cummins 5.9L 24V (1998.5 – 2002)
  • Cummins 5.9L 24V (2003 – 2007) – Requires removal of factory heat shield
  • Cummins 6.7L 24V (2007.5 – 2018)

 

1994,2002,Dodge,Ram 3500,|1994,2002,Dodge,Ram 2500,|2003,2010,Dodge,Ram 3500,ST|2003,2010,Dodge,Ram 3500,Laramie|2003,2003,Dodge,Ram 2500,Laramie|2003,2010,Dodge,Ram 2500,ST|2003,2010,Dodge,Ram 3500,SLT|2003,2010,Dodge,Ram 2500,SLT|2005,2010,Dodge,Ram 2500,Laramie|2006,2007,Dodge,Ram 2500,TRX4|2006,2007,Dodge,Ram 3500,Sport|2006,2007,Dodge,Ram 2500,Sport|2006,2010,Dodge,Ram 2500,Power Wagon|2007,2007,Dodge,Ram 3500,TRX4|2008,2010,Dodge,Ram 2500,SXT|2008,2009,Dodge,Ram 3500,SXT|2010,2010,Dodge,Ram 2500,TRX|2011,2018,Ram,3500,SLT|2011,2013,Ram,2500,ST|2011,2013,Ram,3500,ST|2011,2018,Ram,3500,Laramie|2011,2018,Ram,2500,Laramie|2011,2018,Ram,2500,SLT|2011,2018,Ram,2500,Laramie Longhorn|2011,2018,Ram,2500,Power Wagon|2011,2018,Ram,3500,Laramie Longhorn|2012,2016,Ram,2500,Outdoorsman|2013,2018,Ram,3500,Tradesman|2013,2018,Ram,3500,Big Horn|2013,2018,Ram,2500,Tradesman|2013,2018,Ram,2500,Big Horn|2013,2015,Ram,2500,Lone Star|2013,2015,Ram,3500,Lone Star|2014,2015,Ram,2500,Laramie Limited|2014,2015,Ram,3500,Laramie Limited|2016,2018,Ram,2500,Limited|2016,2018,Ram,3500,Limited|2017,2017,Ram,3500,Lone Star

16

on

Part: FPE-34754

Only from Fleece, a complete fuel supply upgrade kit for your 1998.5-2002 Dodge Cummins. The kit includes everything you need to properly route, plumb, pump, and filter fuel for your VP engine. Includes a new sending unit and float to get your fuel gauge working again!

Kit includes:

  • PowerFlo Lift Pump with integral fuel sender
  • Donaldson 3 micron fuel filter water separator
  • Filter base with integral mounting
  • Distribution filter block / filter coupler
  • Push Lock hose and all necessary AN and barb fittings

The PowerFlo Lift Pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance. The PowerFlo is the only in-tank lift pump capable of supporting up to 800 hp!

Features:

  • Direct OEM In-Tank Fitment: The PowerFlo Lift Pump requires no drilling, cutting, or sumps to cut into your fuel tank and installs in less than half the time of other high flow lift pumps.
  • Dual Gerotor: Two is always better than one, and the PowerFlo delivers with two OEM quality gerotor pumps, increasing flow capacity and reliability over the factory pump. Capable of supporting up to 800 hp, including dual CP3 pump configurations.
  • Seamless Integration: The active fill bucket eliminates the need for tank sumps, draw straws, and the -ò tank issues typically encountered when seeking a higher flow lift pump to meet your engine’s need.

 

1998,2002,Dodge,Ram 2500,|1998,2002,Dodge,Ram 3500,

8

on

Part: FPE-34755

Only from Fleece, a complete fuel supply upgrade kit for your 2003-2004 Dodge Cummins. The kit includes everything you need to properly route, plumb, pump, and filter fuel for your Cummins engine. Includes a new sending unit and float to get your fuel gauge working again!

Kit includes:

  • PowerFlo Lift Pump with integral fuel sender
  • Donaldson 3 micron fuel filter and water separator (Donaldson P/N P553207)
  • Filter base with integral mounting
  • Fuel Filter delete (FPE-FFD-RO-3G)
  • Distribution filter block / filter coupler
  • Push Lock hose and all necessary AN and barb fittings

The PowerFlo Lift Pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance. The PowerFlo is the only in-tank lift pump capable of supporting up to 800 hp!

Features:

  • Direct OEM In-Tank Fitment: The PowerFlo Lift Pump requires no drilling, cutting, or sumps to cut into your fuel tank and installs in less than half the time of other high flow lift pumps.
  • Dual Gerotor: Two is always better than one, and the PowerFlo delivers with two OEM quality gerotor pumps, increasing flow capacity and reliability over the factory pump. Capable of supporting up to 800 hp, including dual CP3 pump configurations.
  • Seamless Integration: The active fill bucket eliminates the need for tank sumps, draw straws, and the -ò tank issues typically encountered when seeking a higher flow lift pump to meet your engine’s need.

Limited Lifetime Warranty on the PowerFlo Lift Pump when purchased with this kit: PowerFlo Lift Pump Warranty Policy

 

2003,2004,Dodge,Ram 3500,Laramie|2003,2003,Dodge,Ram 2500,Laramie|2003,2004,Dodge,Ram 3500,SLT|2003,2004,Dodge,Ram 2500,SLT|2003,2004,Dodge,Ram 3500,ST|2003,2004,Dodge,Ram 2500,ST

12

on

Fleece ½″ High-Flow Feed-Line Kit (OEM Filter → CP3) • 2010-2018 Ram 2500/3500 6.7 L Cummins

Replace the restrictive factory 3⁄8″ supply hose with Fleece’s ½-inch High-Flow Feed-Line Kit and keep your 6.7 L Cummins CP3 pump fed with up to 40 % more volume at wide-open throttle. Maintaining adequate supply pressure helps the injection system deliver consistent rail pressure, protects pump longevity, and frees horsepower for towing, tuning, or weekend fun.

Why You’ll Want It

  • Bigger ½″ ID hose slashes pressure drop between the OEM filter head and CP3 pump.
  • Direct-fit quick-disconnect and CP3 fittings-no cutting, flaring, or guessing.
  • Supports 600 + rwhp builds or high-duty cycle towing without starving the rail.
  • USA-made components assembled by Fleece Performance for OE-grade reliability.

Kit Contents

  • ½″ push-lock fuel hose (cut-to-length)
  • ½″ quick-disconnect feed fitting (fuel filter outlet)
  • High-flow CP3 inlet fitting (pump side)
  • Installation guide & clamps

Vehicle Fitment

Direct replacement for all 2010-2018 Ram 2500 and 3500 with the 6.7 L Cummins diesel, including Tradesman, SLT, Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star, Outdoorsman, TRX, and ST trims.

Installation Notes

Installs in under an hour with basic hand tools. Bleed the fuel system after installation to prevent hard starts. No tuning required.

Technical Details

Part Number FPE-HFFL-1018
Inside Diameter ½″ (12.7 mm)
Hose Type Push-lock, diesel-rated
Max Working Pressure 300 psi *
Warranty Limited Lifetime*

*Per Fleece Performance published specifications.

Pair It With

28