Your cart is currently empty!
Bilstein 6112 0.8-2.8″ Front and 0.3-1.7″ Rear Lift Assembled Coilovers for 2021-2025 Ford Bronco
Description
Bilstein 6112 0.8-2.8″ Front and 0.3-1.7″ Rear Lift Assembled Coilovers for 2021-2025 Ford Bronco
Bilstein 6112 0.8-2.8″ Front and 0.3-1.7″ Rear Lift Pre-Assembled Coilovers – 2021-2025 Ford Bronco
Part #: 6112Bronco-ASB
What’s Included
- Front coilovers: Bilstein B8 6112 kit 47-313996 – 60 mm monotube shocks with matched lift springs and billet spring seats
- Rear coilovers: Bilstein B8 6112 kit 47-314009 – 60 mm monotube shocks with matched lift springs and billet spring seats
- Pre-assembled with new top mounts, bushings, and hardware – no spring compressor needed
Adjustable Lift
- Front: ~0.8 – 2.8″ via snap-ring spring perch positions
- Rear: ~0.3 – 1.7″ via snap-ring spring perch positions
- Actual height varies with trim, accessories, and spring condition.
Why 6112
- Big-body control: 2.65″ OD body with a 60 mm digressive piston for increased damping authority and cooler operation
- More clearance: level stance, room for larger tires, and increased usable wheel travel
- Monotube consistency: fade-free performance on and off road
- Bolt-in convenience: ships assembled to save time and avoid compressor risk
Specifications
| Front 6112 – 47-313996 | Rear 6112 – 47-314009 | |
|---|---|---|
| Series | B8 6112 | B8 6112 |
| Body diameter (OD) | 2.65 in. | 2.65 in. |
| Piston diameter | 60 mm | 60 mm |
| Design | Monotube – snap ring grooved body | Monotube – snap ring grooved body |
| Reservoir | No | No |
| Damping | Non-adjustable digressive | Non-adjustable digressive |
| Finish | Zinc plated dampers – black springs | Zinc plated dampers – black springs |
| Replacement mount kit | B4-KT1-Z471A00 | B4-KT1-Z472A00 |
Fitment
- Ford Bronco 2021, 2022, 2023, 2024, 2025
- Front and rear coilover replacement – not for Bronco Sport
Install Notes
- Choose desired circlip positions before installation to target your lift within the stated ranges
- Aftermarket upper control arms required: Yes (per Bilstein front kit specification)
- Alignment required after installation
Experience the legendary Bilstein feel with increased ground clearance, confident handling, and a simple bolt-on install. Level up your Bronco with pre-assembled 6112 coilovers and hit the road or trail with confidence.
Be the first to review “Bilstein 6112 0.8-2.8″ Front and 0.3-1.7″ Rear Lift Assembled Coilovers for 2021-2025 Ford Bronco”
Questions and answers of the customers
-
If installing on 2023 2dr Badlands SAS, at clip 6 F and R, will new control arms be required?
-
Q If installing on 2023 2dr Badlands SAS, at clip 6 F and R, will new control arms be required? answer nowA When installing Bilstein 6112 assembled coilovers on a 2023 2-door Ford Bronco Badlands with the Sasquatch package, and setting the circlip on position 6. Yes, upgraded UCAs are strongly recommended at clip 6. At 2.8″ of front lift, the stock UCAs may: Cause limited suspension travel Bind at full droop Result in poor alignment specs (especially caster)
Hi, I have a 2023 Ford Bronco, Big Bend , 4 Door, 2.7 litre engine. Non Sasquatch edition. Will the Bilstein 6112 ‘s fit my car?
-
Q Hi, I have a 2023 Ford Bronco, Big Bend , 4 Door, 2.7 litre engine. Non Sasquatch edition. Will t...... Read more answer nowA Yes, the Bilstein 6112 front and rear coilover kits are compatible with your 2023 Ford Bronco Big Bend 4-door, 2.7L engine, non-Sasquatch edition.
ATTENTION STATE OF CALIFORNIA CONSUMERS. WARNING: Cancer and reproductive harm – www.p65warnings.ca.gov
Reviews
There are no reviews yet.