Bilstein 5100 0-2.75″ Front Assembled Coilovers and 0-1″ Rear Lift Shocks 2011-2018 RAM 1500 4WD

SKU: 5100R1500B
4.1111111111111 out of 5 based on 9 customer ratings
(9 customer reviews)
Sale!
Bilstein 5100 0-2.75 Front Assembled Coilovers and 0-1 Rear Lift Shocks 2011-2018 RAM 1500 4WD
Bilstein 5100 0-2.75 Front Assembled Coilovers and 0-1 Rear Lift Shocks 2011-2018 RAM 1500 4WD

Description
Bilstein 5100 0-2.75″ Front Assembled Coilovers and 0-1″ Rear Lift Shocks 2011-2018 RAM 1500 4WD

Bilstein 5100 0-2.75″ Front Lift Pre-Assembled Coilovers + 0-1″ Rear Lift Shocks – 2011-2018 RAM 1500 4WD

Part: 5100R1500B

Level your RAM 1500 with a matched front and rear package. The front Bilstein 5100 coilovers arrive fully assembled with OE-style replacement coils and new top mounts, so you skip the spring compressor. Rear 5100 shocks are sized for 0-1″ rear lift components for balanced ride and control.

What’s Included

  • Front (pre-assembled): 2 x Bilstein 5100 ride-height-adjustable struts 24-317887 with OE replacement coils, new mounts, insulators, dust covers, and hardware
  • Rear: 2 x Bilstein 5100 shocks 24-187374 for 0-1″ rear lift

Front Perch Settings (clip positions)

  • Clip 5: ~2.8″
  • Clip 4: ~2.1″
  • Clip 3: ~1.4″
  • Clip 2: ~0.7″
  • Clip 1: 0″ stock

Actual lift varies with vehicle weight, bumper/winch, accessories, and spring wear.

Why You’ll Like It

  • No spring compressor needed – fronts come fully assembled
  • Adjustable 0-2.75″ front lift – dial in level stance or mild lift for tire clearance
  • Bilstein 5100 control – monotube, 46 mm digressive piston for consistent, fade-resistant damping
  • OE-style comfort – tighter body control while keeping daily ride quality

Front Shock Specs – 24-317887

  • Series: 5100
  • Extended length: 21.40 in
  • Collapsed length: 15.12 in
  • Design: snap-ring grooved body (coilover), monotube, nitrogen gas-charged, 46 mm piston

Rear Shock Specs – 24-187374

  • Series: 5100
  • Extended length: 26.73 in
  • Collapsed length: 16.75 in
  • Design: smooth body (non-coilover), monotube, nitrogen gas-charged, 46 mm piston
  • Rear lift support: 0-1″ components (shocks do not add lift by themselves)

Fitment

  • Vehicle: RAM 1500 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
  • Drivetrain: 4WD only
  • Exclusions: will not work on trucks with the TRX package
  • Height ranges: front adjustable 0-2.75″; rear shocks matched to 0-1″ rear lift components

Processing Time

  • Coilover assembly time: 3-9 business days

Technical Notes

  • Multiple snap-ring grooves set spring seat height within the stated range
  • Monotube design with self-adjusting deflective-disc valving increases wheel travel and improves handling
  • Alignment is required after installation
  • Tire clearance depends on wheel width and offset – verify after install

FAQ

Do these come assembled? Yes – new coils, mounts, and hardware are installed up front.

Which clip should I choose? Start near Clip 2 or 3 for a typical level; adjust based on added front weight and desired rake.

Will the rear shocks lift my truck? No – they are sized and valved to work with up to 1″ rear lift springs or spacers.

Looking for a kit for a 4-6″ lift kit? Bilstein 5100 4-6" Front Assembled Coilovers and 4" Rear Lift Shocks 2011-2018 RAM 1500 4WD

Customer reviews

Rated 4.1111111111111 out of 5 stars
9 reviews
5 stars 7 77 %
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 2 22 %

9 reviews for Bilstein 5100 0-2.75″ Front Assembled Coilovers and 0-1″ Rear Lift Shocks 2011-2018 RAM 1500 4WD

Add a review

Use one of the allowed file type: jpg,png,jpeg.

    Questions and answers of the customers

      I have a 2017 ram 1500 ecodiesel 4x4 laramie crew cab. Between the rear tire and front finder is 7". front tire and front finder is 4.5" Will these coil over shocks into front carry the wieght of the truck
    1. 0 votes
      Q I have a 2017 ram 1500 ecodiesel 4x4 laramie crew cab. Between the rear tire and front finder is ...... Read more
      A yes sure they will increase front height  by 2.5''
      2. I have a 2016 ram 1500 4x4. I think I need to go up about 2" in the front to make the truck level. Where should I order the 5100 to be set for the proper height?
    2. 0 votes
      Q I have a 2016 ram 1500 4x4. I think I need to go up about 2" in the front to make the truck level...... Read more
      A clip4
      3. Are their any concerns with using these shocks with OEM UCAs, set at 2.8"?
    3. 0 votes
      Q Are their any concerns with using these shocks with OEM UCAs, set at 2.8"?
      A We would recommend replacing them UCAs are recommended but not required, the benefit of UCAs is that they lock caster when the vehicle is leveled and also help you a lot with front end articulation.
      4. Will this work if i have a 2015 ram 1500 sport with a 4in lift kit i will be using 4in strut spacers
    4. 0 votes
      Q Will this work if i have a 2015 ram 1500 sport with a 4in lift kit i will be using 4in strut spacers
      A it will depend on lift kit type. If your lift kit uses subframe crossmember or spindles and stock heith or 0-2'' front coilovers - then yes it will work
      5. will these fit a 2010 ram 1500 4x4 quad cab ?
    5. 0 votes
      Q will these fit a 2010 ram 1500 4x4 quad cab ?
      A yes will fit
      6. Will this fit a 2014 ecodiesel 4wd?
    6. 0 votes
      Q Will this fit a 2014 ecodiesel 4wd?
      A yes will fit
      7. will this fit my 2022 ram 1500 classic warlock
    7. 0 votes
      Q will this fit my 2022 ram 1500 classic warlock
      There are no answers for this question yet.
      8. What height rear would I need to level my 2016 ram if I went with the 2.1” clip?
    8. 0 votes
      Q What height rear would I need to level my 2016 ram if I went with the 2.1” clip?
      There are no answers for this question yet.
      9. Will this kit replace the factory air suspension?
    9. 0 votes
      Q Will this kit replace the factory air suspension?
      A you will require at least rear springs
      A you will require at least rear springs
      10. Will this fit a 2015 ram 1500 v6 4wd?
    10. 0 votes
      Q Will this fit a 2015 ram 1500 v6 4wd?
      A yes, sure will fit
      11. do you guy sell just the assembled front 5100s for 2018 ram 1500?
    11. 0 votes
      Q do you guy sell just the assembled front 5100s for 2018 ram 1500?
      A We can offer 6112 https://www.suspensionlifts.com/shop/ram/1500-ram/2011-2018/2011-2018-ram-1500-front-lifts/bilstein-6112-0-2-75-front-lift-assembled-coilovers-for-2011-2018-ram-1500-4wd/ or 5100 https://www.suspensionlifts.com/shop/ram/1500-ram/2011-2018/shocks-2011-2018/bilstein-b8-5100-height-adjustable-0-2-8-front-shocks-for-2011-2018-ram-1500-4wd/
      12. Will these fit on a 2015 ram 1500 ST 3.6 2WD?
    12. 0 votes
      Q Will these fit on a 2015 ram 1500 ST 3.6 2WD?
      A no sir, for 2wd you need https://www.suspensionlifts.com/shop/ram/1500-ram/2011-2018/shocks-2011-2018/bilstein-5100-1-75-front-0-1-rear-lift-shocks-for-2009-2018-ram-1500/ or https://www.suspensionlifts.com/?swoof=1&pa_vehicle-year=2016&pa_make=ram&pa_model=1500&pa_4wd2wd=2wd

    ATTENTION STATE OF CALIFORNIA CONSUMERS. WARNING: Cancer and reproductive harm – www.p65warnings.ca.gov

    Related products

    Original price was: $979.48.Current price is: $889.49.

    37 in stock

    37 in stock

    2-5 Day Transit Time

    Will not work on trucks with TRX package. Coilover assembly may take 2 to 5 days, assembled with new top mounts bushings hardware
    Share (8)
    Total: 4 Total: 1 Total: 1 Total: 2