Your cart is currently empty!
Bilstein 5100 0-2.75″ Front Assembled Coilovers and 0-1″ Rear Lift Shocks 2019-2024 Ram 1500 Classic 4WD
Description
Bilstein 5100 0-2.75″ Front Assembled Coilovers and 0-1″ Rear Lift Shocks 2019-2024 Ram 1500 Classic 4WD
Bilstein 5100 0-2.75″ Front Lift Pre-Assembled Coilovers + 0-1″ Rear Lift Shocks – 2019-2024 Ram 1500 Classic 4WD
Part: 5100R1500B_n1
Level your Ram 1500 Classic with a matched front and rear package. The front Bilstein 5100 coilovers arrive fully assembled with OE-style replacement coils and new top mounts, so you skip the spring compressor. Rear 5100 shocks are sized for 0-1″ rear lift components to keep the truck composed and controlled.
What’s Included
- Front (pre-assembled): 2 x Bilstein 5100 ride-height-adjustable struts 24-317887 with OE replacement coils, new mounts, insulators, dust covers, and hardware
- Rear: 2 x Bilstein 5100 shocks 24-187374 for 0-1″ rear lift
Front perch settings (clip positions)
- Clip 5: ~2.8″
- Clip 4: ~2.1″
- Clip 3: ~1.4″
- Clip 2: ~0.7″
- Clip 1: 0″ stock
Actual front lift varies with accessories and vehicle weight.
Why you’ll like it
- No spring compressor needed – fronts come fully assembled
- Adjustable 0-2.75″ front lift – set a level stance or mild lift for tire clearance
- Bilstein 5100 control – 46 mm monotube, digressive valving for consistent, fade-resistant damping
- OE-style comfort – tighter body control while keeping daily ride quality
Front shock specs – 24-317887
- Series: 5100
- Extended length: 21.40 in
- Collapsed length: 15.12 in
- Design: snap-ring grooved body (coilover), nitrogen gas-charged, 46 mm piston
Rear shock specs – 24-187374
- Series: 5100
- Extended length: 26.73 in
- Collapsed length: 16.75 in
- Design: smooth body (non-coilover), nitrogen gas-charged, 46 mm piston
- Rear lift support: 0-1″ components (shocks do not add lift by themselves)
Fitment
- Vehicle: Ram 1500 Classic 2019, 2020, 2021, 2022, 2023, 2024
- Drivetrain: 4WD only
- Exclusions: will not work on trucks with the TRX package
- Height ranges: front adjustable 0-2.75″; rear shocks matched to 0-1″ rear lift components
Processing time
- Coilover assembly time: 3-9 business days
Technical notes
- Multiple snap-ring grooves set spring seat height within the stated range
- Self-adjusting deflective-disc valving improves wheel travel and handling
- Alignment is required after installation
- Tire clearance depends on wheel width and offset – verify after install
FAQ
Do these come assembled? Yes – new coils, mounts, and hardware are installed up front.
Which clip should I choose? Start near Clip 2 or 3 for a typical level; adjust based on added front weight and desired rake.
Will the rear shocks lift my truck? No – they are sized and valved to work with up to 1″ rear lift components.
Questions and answers of the customers
-
I have a 2024 Ram Laramie with a Readylift 3.5 in lift and leveling kit. After installing the kit with bigger tires the truck feels like its bouncing all over when I hit bumps. Will this kit fit and resolve the issue?
-
Q I have a 2024 Ram Laramie with a Readylift 3.5 in lift and leveling kit. After installing the kit...... Read more answer nowA Do you have new body style or Classic? yes it will definitely improve the situation.
I have a 2019 ram 1500 big horn with a 6 inch spacer lift the ride feels rough going over pot holes and cracks in the road looking to get ride of the stock shocks and upgrade the smoothness of the ride with out sacrificing the lift itself. 1 will this “help” the issue and two are these coil overs the right fit for my stock shocks already on there.
-
Q I have a 2019 ram 1500 big horn with a 6 inch spacer lift the ride feels rough going over pot hol...... Read more answer nowA If you have stock shocks and you use 6 inch spacer lift then we recommend you to use this kit as it will help you to save your 6 inch spacer lift https://www.suspensionlifts.com/shop/ram/1500-ram/2019-2020/shocks-2019-2020/bilstein-4600-front-coilovers-and-rear-shocks-with-oe-replacement-coils-for-2019-2023-ram-1500-4wd-new-body/
Will they fit on a two thousand nineteen fifteen hundred four wheel drive classic warlock. And will it lift it any more than it already came with factory?Lift.
-
Q Will they fit on a two thousand nineteen fifteen hundred four wheel drive classic warlock. And wi...... Read more answer nowA Yes Will fit for four-wheel drive classic warlock The front will lift but the rear will no
Will they work on a ram 1500 bighorn
-
Q Will they work on a ram 1500 bighornThere are no answers for this question yet. Answer now
Does this kit fit a rwd aswell?
-
A if you have 2019 Ram 1500 classic (older body style) you need toher shocks for 2wd , like the shocks from 2011-2018. Or do you have new body style, not Classic ?A yes will fit as far as you have Classic (older body style). Or do you have new bode style?
Does this kit include the front springs? I see them in the picture but figured I'd ask just incase. Thanks
-
Q Does this kit include the front springs? I see them in the picture but figured I'd ask just incas...... Read more answer nowA yes comes as pictured
do you have setting for bilstein 5100 for 2015 eco diesel, they are heavy in front then the 5.7
-
Q do you have setting for bilstein 5100 for 2015 eco diesel, they are heavy in front then the 5.7 answer nowA here is the manual please https://productdesk.cart.bilsteinus.com//media/products/bilstein/E-WM05-0000007.pdf
ATTENTION STATE OF CALIFORNIA CONSUMERS. WARNING: Cancer and reproductive harm – www.p65warnings.ca.gov
2 reviews for Bilstein 5100 0-2.75″ Front Assembled Coilovers and 0-1″ Rear Lift Shocks 2019-2024 Ram 1500 Classic 4WD