Carli Hemi 3″ Backcountry Lift Kit for 2014-2018 Ram 2500 4WD R1 Coils

Description
Carli Hemi 3″ Backcountry Lift Kit for 2014-2018 Ram 2500 4WD R1 Coils

Carli Hemi 3″ Backcountry Lift Kit for 2014, 2015, 2016, 2017, 2018 Ram 2500 4WD R1 Coils

Part: CS-D3-BC-CS-14-H

Carli Hemi 3″ Backcountry Lift Kit for 2014–2018 Ram 2500 4WD w/ R1 Coils (Gas Models Only)

Upgrade your 2014–2018 Ram 2500 4WD HEMI with the Carli 3″ Backcountry Lift Kit, designed to provide the perfect blend of off-road performance and on-road comfort. Featuring R1 coils specifically tuned for gas engines and remote-reservoir Fox 2.0 shocks, this system offers a plush ride for daily driving while being rugged enough for backcountry trails, job sites, and weekend adventures.

Key Features:

3″ Front Lift Height – Achieves level stance and added clearance
R1 Coil Springs – Tuned specifically for HEMI-powered trucks (not diesel)
Carli-Spec Fox 2.0 Remote Reservoir Shocks – Increased cooling and consistent damping
Progressive Spring Design – Enhanced ride comfort and suspension articulation
Direct Bolt-On Install – No cutting or welding required

Performance Benefits:

• Improved On-Road Comfort – Perfect for highway driving, commuting, and towing

• Backcountry-Ready Handling – Handles rough terrain, gravel roads, and trail use

• Increased Ground Clearance – Clears up to 35″ tires with proper wheel specs

• Longer Suspension Travel – Enhanced off-road capability and wheel articulation

• Maintains Factory Geometry – Optional upgrades available for full performance gains

If you’re looking for a lift kit that transforms your truck into a capable all-rounder—with plush on-road manners and off-road toughness—the Carli 3″ Backcountry Kit with R2 Coils is the ultimate upgrade for your Ram 2500 HEMI. Order now and get ready for smoother roads and tougher trails!

Base Kit Includes:

Sway Bar Selection

*REQUIRED* – You MUST select a Sway Bar option with the BASE Kit. This System has been optimized for use with the Torsion Sway Bar; this sway bar upgrade is a HUGE ride quality upgrade. Maintaining the factory sway bar through use of the Sway Bar Drops is only recommended for customers requiring the stiff rate of the factory sway bar – i.e.: those with snow-plows, in-bed campers or who are constantly hauling to the capacity of the truck.

SKU: CS-DSBD-14
– In-house machined billet aluminum
– Hard-Anodized for corrosion resistance
– Correct factory sway bar geometry on 3″ Lift
– Fitment: 2014+ Ram 2500, 4×4
– Fitment: 2013+ Ram 3500, 4×4

$166.00

Low Mount Steering StabilizerLow Mount Steering Stabilizer

*OPTIONAL* – Bolt in steering stabilizer (factory location). Adjustable from 70-200 psi to run neutral (no directional influence at 70psi) or at 200psi to counter the left-hand pull inherent to tires like Nitto Trail Grapplers. Run in conjunction with the Carli High Mount for the ultimate Dual, Opposing Steering Stabilizer combination that’s infinitely adjustable.

SKU: CS-DLMSS-14
– Direct bolt-in replacement
– Corrects left tire pull, adjustable
– Inside the Carli Stainless Stabilizer
– Fitment: 2014+ Ram 2500, 4×4
– Fitment: 2013+ Ram 3500, 4×4

$357.00

High Mount Steering StabilizerHigh Mount Steering Stabilizer

*OPTIONAL* – Bolt in stabilizer adjustable from 70-200 psi to run neutral (no directional influence at 70psi) or at 200psi to counter the right-hand pull inherent to tires like Toyo Mud Terrains. ** Note: Original 14-18 Drag Links will have 2 jam-nuts and large adjustment collar – order DHMSS-14 stabilizer. If the truck has been updated to the 19+ drag link, order the DHMSS-19.

SKU: CS-DHMSS-14
– Direct bolt-in
– Corrects right tire pull, adjustable
– Inside the Carli Stainless Stabilizer
– Fits Leveled & Lifted trucks, ONLY.
– Does NOT Fit with Factory Power Wagon Sway Bar.
– Fitment: 2014-18 Ram 2500, 4×4
– Fitment: 2013-18 Ram 3500, 4×4

$555.00

Fabricated Radius Arm Option

OPTIONAL* – Icing on the cake, these arms add Limit Strap Protection for your Front Shocks, 1/4″ Boxed Steel Construction, and Serviceable 3″ – 17-4 Stainless Steel Spherical Bearings.

SKU: CS-DFRA-14
– Massive Strength Upgrade vs. Stock Arm
– Improved ride quality and control
– Internal X-Bracing & Serviceable 17-4 Stainless Spherical Joints
– 12″ Quad Wrap Limit Straps, For 3.25″ Lift Systems
– Requires Radius Arm Drop Brackets with Carli 3″ Front Lift
– Fitment: 2014+ Ram 2500, 4×4
– Fitment: 2013+ Ram 3500, 4×4

$1,761.00

Front Differential GuardFront Differential Guard

*OPTIONAL* – Better to have it and not need it than need it and not have it.

SKU: CS-DFDG-14
– Protection for your Ring-Gear
– Bolts On In Minutes
– 1/4″ Wall Cold-Rolled Steel Construction
– Grade 8 Hardware
– Fitment: 2014+ Ram 2500, 4×4
– Fitment: 2013+ Ram 3500, 4×4
– Power Wagons may require modification to the Diff Guard or Lower Diff Housing.

$237.00

Lifetime Ball JointsLifetime Ball Joints

*OPTIONAL* – Do your ball joints once, grease every oil change and forget they exist…

SKU: CS-DBJP-14 
– Set of Upper and Lower Ball Joints
– LIFETIME Advanced-Replacement Warranty
– Copper Plated, Carburized and Dry-Lubed
– Includes a tube of Redline CV2 Grease
– Fitment: 2013+ Ram 3500 4×4
– Fitment: 2014+ Ram 2500 4×4

$940.00