OME 2.5″ Front Lift Assembled Coilovers and 0-2.36″ Rear Lift Sport Shocks for 2007-2021 Toyota Tundra

Description
OME 2.5″ Front Lift Assembled Coilovers and 0-2.36″ Rear Lift Sport Shocks for 2007-2021 Toyota Tundra

OME 2.5″ Front Lift Assembled Coilovers and 0-2.36″ Rear Lift Sport Shocks for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Toyota Tundra

Dial in a true 2.5″ front lift and keep factory-like control with a bolt-on coilover package built for real-world loads. This full – front and rear kit uses OME Nitro+ 93018 struts and OME 4017 coils, professionally pre-assembled with new top mounts and hardware so you skip the spring compressor and bolt them in with confidence. Height is set via the included perch rings to compensate for added accessories like bull bars and winches, helping you maintain your target ride height and stance.

Part number: OME-FR07-TUNS

What’s Included

• 2 x OME Nitro+ front struts (93018)
• 2 x OME front coil springs (4017)
• 2 x OME Rear (63100)
• New strut mounts, isolators, dust boots, and assembly hardware
• Pre-assembled coilover units set to your chosen load option

Why You’ll Like It

• No spring compressor needed – arrives fully assembled for a faster, safer install
• Genuine OME match – shocks and coils tuned to work together for controlled ride and handling
• Load-compensated height – snap-ring perch positions let us set the front to suit added accessories
• Real-world durability – Nitro+ struts built for rough roads, towing, and overlanding

Choose Your Load Option

We set the strut perch position during assembly to match your truck’s constant front weight. Pick the option that best describes your setup:

• Stock Weight – no front accessories
• Alloy Bull Bar Only
• Steel Bull Bar Only
• Bull Bar & Winch
• Bull Bar, Winch & Accessories – highest front load (e.g., dual batteries, skid plates, lights)

Note: Actual lift will vary with added weight and may settle slightly after initial kilometres.

Fitment

• Vehicle – Toyota Tundra 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
• Drivetrain – 2WD or 4WD
• Lift – targets approximately 2.5″ front with appropriate load setting

Technical Notes

• Front-only coilover package
• Alignment is required after installation
• Torque all hardware to manufacturer spec and re-check after initial drive
• For best results, pair with appropriate rear springs and shocks

FAQ

Do these come assembled? Yes. We pre-assemble with new top mounts and hardware and set the perch for your selected load.

How is the height adjusted? Via snap-ring perch positions on the OME strut body. We set this during assembly based on your load option.

Will this work with a heavy bull bar and winch? Yes. Choose the matching load option so we can set the correct perch height to maintain your desired lift.

REAR SHOCKS:

Old Man Emu 63100 (old part number 60100)

These are a rear Nitrogen gas charged shock for improved ride and control on and off-road.