Bilstein 6112 Front 0.3-2.5″ Lift Kit for 2019-2022 Chevy/GMC Sierra Silverado 1500 2WD/4WD
Bilstein 6112 Front 0.3-2.5 inch Lift Kit for 2019, 2021, 2022 Chevy/GMC Sierra Silverado 1500 2WD/4WD
need it assembled?
Will not work on Trail Boss. For Trail Boss kit please click here:
Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Questions and answers of the customers
Will these work on 2020 silverado rst 1500 3.0 duramax with 6inch rough country lift done with spacers on the front ?
- Will these fit a 2020 Sierra Denali with factory arc
Q Will these fit a 2020 Sierra Denali with factory arc answer nowA officially no
would I get a better ride if i dont fully extende the strut leave it in the stock ride level and just use a 2inch lift strut block
- I have a Readylift 4 inch SST kit on my 2021 Sierra 1500 4WD 5.3L currently. Can I add the 6112's up front and 5100 in back? If I am able to add the 6112's do I have to keep them set to 0?
- Does it fit on gmc AT4 2020?
Q Does it fit on gmc AT4 2020?
I am wanting 3.5” of lift with better than stock shocks for my 20’ Silverado 1500 diesel. The 6112’s specify 2.0” on the diesel of max lift on the #6 setting. Would it be ok to run this with a 1.5” strut spacer or should i just run the 3.5” icon struts?
- What is the part number for the shocks in this kit? Why does it only lift the 6.2L 2" vs up to 3.5" w/ other engines?
- does anyone know if these work on a 2021 model chevrolet? is there any changes on why it wouldn't work?
- I'd like to run this set up on my 2020 Chevy Silverado 1500 Trail Boss 5.3L. I'd like to go 2" higher up front and 1" in the rear. Will this set up achieve that or do I need to add an additional lift kit? I need clearance for 20" x 9.5" wheels with -12 offset...Can you provide me with the proper set up to achieve this please? Much appreciated!!!
- So if I installed this on a 2020 AT4, would I lose height? In one of the questions answered, you mentioned that you will maintain "almost stock height". That sounds like I'm losing, can you confirm?
Q So if I installed this on a 2020 AT4, would I lose height? In one of the questions answered, you ...... Read more answer nowA As the BILSTEIN catalog shows, these shocks are not fitted for the '2020 GMC Sierra 1500 AT4 but we can offer https://www.suspensionlifts.com/shop/chevy-gmc/silverado-1500/2019/bilstein-b8-5100-rha-0-1-1-front-lift-shocks-for-2019-2020-gmc-sierra-1500-2wd-4wd/ You can use a stock koils Installation Instructions https://productdesk.cart.bilsteinus.com//media/products/bilstein/E4-WM5-Y659A00.pdf
Will this fit a 2017 GMC sierra 1500 slt
Q Will this fit a 2017 GMC sierra 1500 slt answer nowA I want something like this with shocks and coils already together
Will this fit 2020 AT4 at stock height? Does this come with springs?
Q Will this fit 2020 AT4 at stock height? Does this come with springs? answer nowA It will fit on Chevrolet Silverado 1500 2020-2019, GMC Sierra 1500 2020-2019 Set comes shocks + springs Can be adjusted between 0.3-2.5 ″ LIFT when installed on a truck Installation Instructions https://productdesk.cart.bilsteinus.com//media/products/bilstein/E4-WM5-Y664A00_1.pdf
Will this work on a 2020 Silverado 1500 4x4 with the Duramax engine? What would be the maximum lift?
Q Will this work on a 2020 Silverado 1500 4x4 with the Duramax engine? What would be the maximum lift? answer nowA will work up to 2.5''
Hello will the 6112 and the 5160 be a good combo for a 2020 Trailboss if I want to keep the factory 2” lift all around? Also would you recommend upper control arms or is that not necessary?
Q Hello will the 6112 and the 5160 be a good combo for a 2020 Trailboss if I want to keep the facto...... Read more answer nowA yes, it will be good for keeping stock height UCA's are recommended but not required, the benefit of the UCA's is to fix the caster when the vehicle is getting aligned and also helps you a lot with articulation on the front end.
Do you have anything to replace the stock Rancho shocks in a 2020 Trail Boss? The 6112's would be nice...
Q Do you have anything to replace the stock Rancho shocks in a 2020 Trail Boss? The 6112's would be...... Read more answer nowA We can offer https://www.suspensionlifts.com/shop/chevy-gmc/silverado-1500/2019/bilstein-b8-5100-rha-0-1-1-front-lift-shocks-for-2019-2020-gmc-sierra-1500-2wd-4wd/ Or you can use 6112 Please note 6112 will give you almost stock height for Trailboss (will not provide additional lift)
Are you certain this fits the 2019-2020 Silverado? From Bilstein directly these are not available, so I'm assuming these are 2017-2018 model specific, but could/should fit the 2019-2020 as well.
Q Are you certain this fits the 2019-2020 Silverado? From Bilstein directly these are not available...... Read more answer nowA Yes, this item (pt# 47-293557) fits 4th gen Silverado 1500 / 5th gen Sierra 1500 (2019-2020) -- except TrailBoss/AT4 submodels. Previous gen Silverado/Sierra uses pt# 47-273702.