Skyjacker 4-8″ Rear Lift Hydro Shocks for 1980-1996 Ford Bronco 2WD/4WD

Description
Skyjacker 4-8″ Rear Lift Hydro Shocks for 1980-1996 Ford Bronco 2WD/4WD

Skyjacker 4-8″ Lift Rear Hydro Shocks for Ford Bronco 2WD/4WD 1980|1981|1982|1983|1984|1985|1986|1987|1988|1989|1990|1991|1992|1993|1994|1995|1996

Fits years: 1980|1981|1982|1983|1984|1985|1986|1987|1988|1989|1990|1991|1992|1993|1994|1995|1996

Includes: 2 Rear Shocks (part #H7060)

Manufacturer’s fitment notes:

Skyjacker® Hydro Shocks offer you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S., control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the ‘shock’ of bumps and suspension loading is actually performed by the springs in the suspension. The shock’s real job is controlling the energy stored in the springs. Note: shocks will not expand automatically like the gas shocks do.

• Hydraulic Action
• Orifice Disk
• Velocity Sensitive Valving
• Leak Proof Seal
• Bonded Iron Piston
• Chromed Piston Rod
• Red Boot Included
• Red Polyurethane Bushings
• Limited Lifetime Warranty

Specs:

Extended Length: 29.83

Collapsed Length: 17.3

*Length is measured from the center of the eyelet to the center of the eyelet or base of the stem*

Looking for a different series?

Looking for a different position?

Looking for another lift?

HYDRO H7000

Hydro and Nitro Shocks Skyjacker. Suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S., control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the ‘shock’ of bumps and suspension loading is actually performed by the springs in the suspension. The shock’s real job is controlling the energy stored in the springs.HYDRO H7000 Series Shocks are recommended for multiple shockapplications and mild to moderate off-road use.

• Hydraulic Action
• Multi-Stage Velocity Sensitive Valving
• Twin Tube Construction
• Bonded Iron Piston
• Chromed Piston Rod with Micro Pores
• Red Polyurethane Bushings
• Includes Red Boot
• Limited Lifetime Warranty