Bilstein 4600 Front and Rear Shocks 1998-2011 Ford Ranger 4WD/Edge (Torsion front)

SKU: 24-188241_24-188258
5 out of 5 based on 8 customer ratings
(8 customer reviews)
Bilstein 4600 Front & Rear Shocks 98-'11 Ford Ranger RWD
Bilstein 4600 Front & Rear Shocks 98-'11 Ford Ranger RWD

Description
Bilstein 4600 Front and Rear Shocks 1998-2011 Ford Ranger 4WD/Edge (Torsion front)

Bilstein 4600 Front & Rear Shocks 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Ford Ranger RWD/4WD

Important Fitment Notes:

  • 4WD – Fits All Submodels
  • RWD – Fits Ford Ranger Edge Submodel Only
  • Fits Ford Ranger EV

Please check your old shocks dimensions

Front Shocks:

Series: 4600

FRONT
Extended Length: 17.92″
Compressed Length: 13.72″
Rod Diameter: 1.81″
Upper Mounting Style: Stem
Lower Mounting Style: Bar Pin
Part Number: 24-188241

Rear Shocks:

Series: 4600

REAR
Extended Length: 26.36″
Compressed Length: 16.14″
Rod Diameter: 1.81″
Upper Mounting Style: Eyelet

Lower Mounting Style: Eyelet

Part Number: 24-188258

Fitment: Bilstein 4600 Front & Rear Shocks 98-11 Ford Ranger RWD/4WD

Includes 4 Shocks

Customer reviews

Rated 5 out of 5 stars
8 reviews
5 stars 8 100 %
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

8 reviews for Bilstein 4600 Front and Rear Shocks 1998-2011 Ford Ranger 4WD/Edge (Torsion front)

Add a review

Use one of the allowed file type: jpg,png,jpeg.

    Questions and answers of the customers

      i have a2004 ranger edge short wheelbase with torsion bars stock ,will these shocks fit ?
    1. 0 votes
      Q i have a2004 ranger edge short wheelbase with torsion bars stock ,will these shocks fit ?
      A Yes Will fit
      2. Will these fit my 1998 Mazda B4000 4wd?
    2. 0 votes
      Q Will these fit my 1998 Mazda B4000 4wd?
      A if you have torsion bars front suspension
      3. Can you adjust how many inches of lift you want to raise
    3. 0 votes
      Q Can you adjust how many inches of lift you want to raise
      A you can adjust your torsion keys, the shocks have no influence on that
      4. I have a 99 Ford ranger xlt with maybe a 1 inch lift would these fit ?
    4. 0 votes
      Q I have a 99 Ford ranger xlt with maybe a 1 inch lift would these fit ?
      A 2wd or 4wd? front torsion bars suspension or front coil springs?
      A I have a 2wd, with the coil suspension, I’m debating on which kit to pick since there are two on the site
      5. I have a 2004 ford ranger edge 2WD torsion bars is this good for a 0-3” lift all around??
    5. 0 votes
      Q I have a 2004 ford ranger edge 2WD torsion bars is this good for a 0-3” lift all around??
      A RWD – Fits Ford Ranger Edge Submodel Only
      6. Are these shocks OEM on an 04 Ranger with FX4 level two
    6. 0 votes
      Q Are these shocks OEM on an 04 Ranger with FX4 level two
      A will be good, the best way is to take measurements of your old shocks to be sure
      7. Will this fit my 04 ford ranger xlt RWD torsion bars?
    7. 0 votes
      Q Will this fit my 04 ford ranger xlt RWD torsion bars?
      A rear shocks can fit RWD – officially Fits Ford Ranger Edge Submodel Only please compare to your old shocks
      8. I have 2001 ranger XLT with a 5 in rough country lift, will these shocks fit?
    8. 0 votes
      Q I have 2001 ranger XLT with a 5 in rough country lift, will these shocks fit?
      A It will fit only stock lift(0")
      9. Will it fit my 2004 2wd ford ranger I added a 2inch leveling kit on it...
    9. 0 votes
      Q Will it fit my 2004 2wd ford ranger I added a 2inch leveling kit on it...
      There are no answers for this question yet.
      10. i have a 2002 ford ranger XLT 4.0 v6 4WD is this kit will fit my car?
    10. 0 votes
      Q i have a 2002 ford ranger XLT 4.0 v6 4WD is this kit will fit my car?
      There are no answers for this question yet.
      11. Are these extended travel for a lift. or if I have a torsion and shackle lift do they make extended travel shocks for the extra 3-2 inches.
    11. 0 votes
      Q Are these extended travel for a lift. or if I have a torsion and shackle lift do they make extend...... Read more
      A No. These shocks are only for stock suspension (0 inch height)
      12. Do these fit with 2” front lift from coil spacers?
    12. 0 votes
      Q Do these fit with 2” front lift from coil spacers?
      There are no answers for this question yet.
      13. I have a ‘08 Ranger 4.0L FX4, is this the correct front and rear shocks for this vehicle? And is there any additional hardware needed to replace the stock front and rears shocks and replace them with this kit?
    13. 0 votes
      Q I have a ‘08 Ranger 4.0L FX4, is this the correct front and rear shocks for this vehicle? And is ...... Read more
      A No additional hardware needed Yes, these shocks will fit 2008 FX4 Please compare their mountings toy yours: FRONT Extended Length (IN): 17.92 Inch Compressed Length (IN): 13.72 Inch Rod Diameter (IN): 1.81 Inch Upper Mounting Style: Stem Lower Mounting Style: Bar Pin Part Number: 24-188241 Rear Shocks: Series: 4600 REAR Extended Length (IN): 26.36 Inch Compressed Length (IN): 16.14 Inch Rod Diameter (IN): 1.81 Inch Upper Mounting Style: Eyelet
      14. Will these fit the edge model
    14. 0 votes
      Q Will these fit the edge model
      A

      Yes
      15. Would these fit my 04 ranger with a 4"spindle lift up front and an add a leaf kit in the rear?
    15. 0 votes
      Q Would these fit my 04 ranger with a 4"spindle lift up front and an add a leaf kit in the rear?
      A Do you have Edge, Tremor or some other modification? 2WD or 4WD? Front coil spring or front torsion bars suspension? How many inches is rear lift? The best way will be to compare your old shocks'dimensions and mountings to these: FRONT: Extended Length (IN): 17.92 Inch Compressed Length (IN): 13.72 Inch Rod Diameter (IN): 1.81 Inch Upper Mounting Style: Stem Lower Mounting Style: Bar Pin REAR: Extended Length (IN): 26.36 Inch Compressed Length (IN): 16.14 Inch Rod Diameter (IN): 1.81 Inch Upper Mounting Style: Eyelet
      16. Do these fit on a 1999 Ford ranger 19999
    16. 0 votes
      Q Do these fit on a 1999 Ford ranger 19999
      A Will fit 2WD Ranger FRONT Extended Length (IN): 17.92 Inch Compressed Length (IN): 13.72 Inch Rod Diameter (IN): 1.81 Inch Upper Mounting Style: Stem Lower Mounting Style: Bar Pin REAR Extended Length (IN): 26.36 Inch Compressed Length (IN): 16.14 Inch Rod Diameter (IN): 1.81 Inch Upper Mounting Style: Eyelet
      17. These would just replace the stock shocks on my 2011?
    17. 0 votes
      Q These would just replace the stock shocks on my 2011?
      A Yes, these are replacement shocks for the stock height ( 0'' lift ) truck Please compare the mountings and the length to your old shocks FRONT: Extended Length (IN): 17.92 Inch Compressed Length (IN): 13.72 Inch Rod Diameter (IN): 1.81 Inch Upper Mounting Style: Stem Lower Mounting Style: Bar Pin REAR: Extended Length (IN): 26.36 Inch Compressed Length (IN): 16.14 Inch Rod Diameter (IN): 1.81 Inch Upper Mounting Style: Eyelet Lower Mounting Style: Eyelet

    ATTENTION STATE OF CALIFORNIA CONSUMERS. WARNING: Cancer and reproductive harm – www.p65warnings.ca.gov

    Related products

    $405.87

    Out of stock

    Notify me when item is back in stock.

    Share (12)
    Total: 1 Total: 2 Total: 0 Total: 9