OME 2-2.5″ Rear Lift Heavy Duty Coils for 1996-2002 Toyota 4Runner ARB 2891

SKU: OME-891
5 out of 5 based on 9 customer ratings
(9 customer reviews)
Sale!
Rear OME 891 Coils for 1996-2002 Toyota 4Runner
Rear OME 891 Coils for 1996-2002 Toyota 4Runner

Description
OME 2-2.5″ Rear Lift Heavy Duty Coils for 1996-2002 Toyota 4Runner ARB 2891

ARB/OME 2-2.5″ Rear Lift Heavy Duty Coils for 1996-2002 Toyota 4Runner (ARB 2891)

Old Man Emu (OME) 2891 heavy duty rear coil springs are engineered specifically for the 1996-2002 Toyota 4Runner to support a constant rear load of about 660 lb while maintaining proper ride height, stability, and control on and off the pavement.

These coils are ideal for 3rd gen 4Runners running rear bumpers, swing-out tire carriers, drawer systems, roof-top tents, fridge setups, or other permanent cargo that keeps weight in the back full-time.

Key Features

  • Designed for 1996-2002 Toyota 4Runner (3rd generation) rear suspension.
  • Approximate rear lift: 2.5–3” on a lightly loaded truck, around 2–2.5” with 600–660 lb of constant rear load.
  • Heavy duty spring rate (approx. 210 lb/in), significantly firmer than the factory 4Runner rear coils (around 150 lb/in).
  • Driver-side coil is slightly taller to help correct typical 4Runner driver-side lean (A/B marked coils).
  • Manufactured from high-quality micro-alloyed spring steel for long-term durability.
  • Computer-precision formed, double scragged, and shot-peened for consistent long-term performance.
  • Durable black powder-coat finish for corrosion resistance.
  • Improved load support, stability, and body control with heavy overland or towing setups.
  • Works best with shocks tuned for 2–3” of rear lift.
  • Alignment required after installation of any suspension lift components.

Vehicle Fitment

  • 1996 Toyota 4Runner
  • 1997 Toyota 4Runner
  • 1998 Toyota 4Runner
  • 1999 Toyota 4Runner
  • 2000 Toyota 4Runner
  • 2001 Toyota 4Runner
  • 2002 Toyota 4Runner

Load Rating and Recommended Use

ARB/OME 2891 coils are classified as heavy duty and designed around a constant rear load of approximately 660 lb. This makes them ideal for 4Runners equipped with:

  • Rear steel bumpers
  • Tire carriers
  • Drawer systems
  • Fridge setups and tools
  • Camping or overland gear

They prevent sagging, reduce bottoming out, and maintain rear ride height under heavy expedition loads.

What Is Included

  • 1 pair of Old Man Emu rear coil springs (Part Number: ARB 2891)
  • A/B specific coils (driver/passenger)

Technical Specifications

Specification Value
Bar diameter 15.5 mm
Free height (A coil) 425 mm
Free height (B coil) 415 mm
Number of turns 9.5
Coil weight 5.6 kg (approx.)
Spring rate 210 lb/in (≈37 N/mm)
Typical OE rear spring rate 150 lb/in
Intended rear load ≈660 lb constant

Installation Notes

  • Install the taller A coil on the driver side.
  • Use with shocks designed for 2–3” rear lift.
  • A 4-wheel alignment is required after installation.
  • Check rear brake line length and panhard bar angle on lifts near or above 2.5”.

Why Choose Old Man Emu 2891 Heavy Duty Rear Coils?

These coils are built for 4Runners that carry real weight every day. If your truck runs camping gear, tools, armor, or towing equipment, the OME 2891 pair keeps the rear level, stable, and predictable on rough roads and over long-distance travel.

Customer reviews

Rated 5 out of 5 stars
9 reviews
5 stars 9 100 %
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

9 reviews for OME 2-2.5″ Rear Lift Heavy Duty Coils for 1996-2002 Toyota 4Runner ARB 2891

Add a review

Use one of the allowed file type: jpg,png,jpeg.

    Questions and answers of the customers

      do the springs come with any old man emu stickers
    1. 0 votes
      Q do the springs come with any old man emu stickers
      There are no answers for this question yet.
      2. Will these coil spring fit my toyota 4runner 1997 limited 2wd?
    2. 0 votes
      Q Will these coil spring fit my toyota 4runner 1997 limited 2wd?
      A yes will fit you'll need rear shocks that are longer than stock shocks such as https://www.suspensionlifts.com/shop/toyota-4runner/1996-2002/shocks-96-02-toyota-4runner/rear-old-man-emu-shocks-1996-2002-toyota-4runner/ https://www.suspensionlifts.com/product-category/toyota-4runner/1996-2002/?swoof=1&pa_frontrear=rear&pa_lift=0-8,0-25,0-5,0-6,0-75,0-87,0-9,1,1-25,1-3,1-45,1-5,1-6,1-7,1-75,1-8,1-875,2&really_curr_tax=32-product_cat
      A yes, they just installed on my 97 4runner sr5 2wd 270,000miles. and just replace the shocks if you haven't done so, shocks have to get moved to install these coils. shocks are easy, a blind man could replace shocks on a 97 4runner. upgrades are always nice but the driver tells the machine what to do. react to the road and driving conditions and it don't matter what shocks you got.
      3. I have toytec shocks. Will these coils be compatible or do I need longer shocks?
    3. 0 votes
      Q I have toytec shocks. Will these coils be compatible or do I need longer shocks?
      A old coils come out new "heavy duty" 2891 coils go in. longer shocks not needed or control arms. just replace some bushings while you have the time and stuff is apart.
      4. 1999 Toyota 4runner with Aftermarket rear bumper and swing out spare rack. Installed 2890 springs but it only gave me an inch of lift. I don't know the weight of the rear bumper, rack and spare tire but I'd guess it all to add up to about 375 to 425lbs. I do have a second gas tank in the spare tire slot which would add another 150lbs or so but I wouldn't be at the 660lbs of constant weight that is referenced for the 2891 springs. The 2890 springs only give me about and 1.5 inch of lift with the current constant load at whatever it is. Does it sound like the 2891 would give me the remaining 1.5 inches without being too stiff given the roughly 400-525 lbs of constant weight?
    4. 0 votes
      Q 1999 Toyota 4runner with Aftermarket rear bumper and swing out spare rack. Installed 2890 springs...... Read more
      There are no answers for this question yet.
      5. Will these springs work on a 04’ sequoia 4x4?
    5. 0 votes
      Q Will these springs work on a 04’ sequoia 4x4?
      A haven't tested it by ourselves can't tell for sure 891 coils have these characteristics: Bar Dia. mm 15.5 Free Height MM (a) 425 (b) 415 Number of turns 9.5 Coil weight (kg) 5.6 spring rate lbf/in 210 Spring Rate N /mm 37 OE spring rate LBS for 4Runner 150
      6. I have a 2001 Isuzu Trooper.Will these coils work with it? What shocks will I need to go with them?
    6. 0 votes
      Q I have a 2001 Isuzu Trooper.Will these coils work with it? What shocks will I need to go with them?
      A haven't tested it with Isuzu can't tell for sure
      7. I have a 1997 4runner with 5100 rear shocks and the adjustables in the front set to 2 3/4 will these work in the rear for me?
    7. 0 votes
      Q I have a 1997 4runner with 5100 rear shocks and the adjustables in the front set to 2 3/4 will th...... Read more
      A Hello Yes, these coils fit your truck and give you a 2-2.5 inch lift. But pay your attention that this is a HEAVY DUTY COILS with a Heavy Load (Constant 660 Lbs -GVW) If you don’t have an extra load at the back then the ride can be tough
      8. I have bilstein shocks in the rear, and my current coils are stock with a 2” spacer, will these work?
    8. 0 votes
      Q I have bilstein shocks in the rear, and my current coils are stock with a 2” spacer, will these w...... Read more
      A Will work if you have Heavy Load (Constant 660 Lbs -GVW)
      9. do i need to change the rear shock on this? and what kind if i have to change
    9. 0 votes
      Q do i need to change the rear shock on this? and what kind if i have to change
      A You'll need longer shocks https://www.suspensionlifts.com/shop/toyota-4runner/bilstein-0-2-rear-lift-shocks-1996-2002-toyota-4runner/ https://www.suspensionlifts.com/shop/toyota-4runner/toytec-boss-rear-2-5-3-75-inch-lift-shocks-1996-2002-4runner/ https://www.suspensionlifts.com/shop/toyota-4runner/rear-arb-ome-60073-shocks-96-02-toyota-4runner/
      10. Will these work with rancho 9000xl shocks? They’re about a 2.75” lift
    10. 0 votes
      Q Will these work with rancho 9000xl shocks? They’re about a 2.75” lift
      A Will work if the shocks have 3'' longer travel then stock. What Rancho part number are you asking about? What is the year of your 4Runner?
      11. Is the OME 891 with 3" lift ? For how much constant load Is it ? I cannot find it anymore in the new arb catalogue, why ?
    11. 0 votes
      Q Is the OME 891 with 3" lift ? For how much constant load Is it ? I cannot find it anymore in the ...... Read more
      A It's for about 0-110lbs constant load. Please see this for 200-400 lbs * * * https://suspensionlifts.com/shop/toyota-4runner/1996-2002/toytec-superflex-rear-coils-for-1996-2002-toyota-4runner/
      12. Can you use the factory shocks with these springs?
    12. 0 votes
      Q Can you use the factory shocks with these springs?
      A No, factory shocks will not work right. Longer shocks will be needed https://suspensionlifts.com/shop/toyota-4runner/1996-2002/rear-bilstein-shocks-for-1996-2002-toyota-4runner/

    ATTENTION STATE OF CALIFORNIA CONSUMERS. WARNING: Cancer and reproductive harm – www.p65warnings.ca.gov

    Related products

    Original price was: $280.90.Current price is: $249.95.

    67 in stock

    67 in stock

    1-3 Day Transit Time

    Share (3)
    Total: 1 Total: 1 Total: 0 Total: 1