Bilstein 5100/OME 2-2.5″ Front Lift Assembled Coilovers and 0-2″ Rear Lift shocks for 2007-2009 Toyota FJ Cruiser

Description
Bilstein 5100/OME 2-2.5″ Front Lift Assembled Coilovers and 0-2″ Rear Lift shocks for 2007-2009 Toyota FJ Cruiser

Bilstein 5100 / OME 2-2.5″ Front Lift Pre-Assembled Coilovers + 0-2″ Rear Lift Shocks – 2007-2009 Toyota FJ Cruiser

Part: BCOFJ07S

Ready-to-bolt front and rear package for your FJ. The front uses Bilstein 5100 height-adjustable struts 24-324359 (old 24-239370) pre-assembled with ARB/OME coils and new mounts—no spring compressor needed. The rear adds longer-travel Bilstein 5100 shocks 33-313146 sized for 0-2″ rear lift to improve articulation while keeping on-road manners tight.

What’s Included

• Front (pre-assembled coilovers): Bilstein 5100 struts 24-324359 with ARB/OME coils, new top mounts, isolators, dust boots, and hardware
• Rear: Bilstein 5100 shocks 33-313146 for 0-2″ rear lift (pair, bushings pre-installed)

Front Coil Choices (select in dropdown)

• OME 2883 – ~1.5″ lift (stock front weight)
• OME 2884 – ~2″ lift (stock load)
• OME 2885 – ~2–2.5″ lift (medium +70–180 lb constant front load)
• OME 2887
• OME 2886 – ~2.5–3″ lift (heavy +230 lb constant front load)

Front Details

• Target lift: ~2–2.5″ depending on coil selection and vehicle weight
• Preset perch: assembled on Clip 1 (lowest); OME coils provide the lift
• Do not raise the clip. Over-lifting can damage CVs/ball joints and void warranty
• Length: extended 22.56″, compressed 17.03″
• Exclusions: without X-REAS suspension

Rear Shock Specs – Bilstein 5100 (33-313146)

• Extended 23.50″ (597 mm) – Collapsed 14.91″ (378.8 mm)
• Smooth body, zinc plated, 46 mm monotube, no reservoir
• For vehicles with 0–2″ rear lift; adds ~2″ more rear flex per side vs. stock

Why You’ll Like It

• Pre-assembled fronts for a faster, safer install
• Matched Bilstein + OME tuning for real-world control on pavement and trail
• Longer-travel rears improve articulation without sacrificing street ride

Fitment

• Vehicle: Toyota FJ Cruiser 2007, 2008, 2009
• Rear height support: 0–2″ rear lift (shocks do not add lift by themselves)

Notes

• Alignment is required after installation; expect minor settling
• Choose coil based on constant front accessory weight (bumper/winch, etc.)