Front OME 2883, 2884, 2885, 2886 Coils 2005-2015 Toyota Tacoma

SKU: OME-T
5 out of 5 based on 6 customer ratings
(6 customer reviews)
Front OME Lift Coils
Front OME Lift Coils

Description
Front OME 2883, 2884, 2885, 2886 Coils 2005-2015 Toyota Tacoma

Front OME 2883, 2884, 2885, 2886 Coil Springs for 2005 – 2015 Toyota Tacoma

Perfect for daily drivers, overland builds, and heavy front bumpers. Old Man Emu (OME) coil springs are engineered by ARB for predictable lift, improved control, and superior durability on difficult terrain. These coils are designed specifically for the 2005 – 2015 Toyota Tacoma (6-lug models only) and deliver consistent ride height with or without added front weight.

Target Fitment

  • 2005 – 2015 Toyota Tacoma (PreRunner and 4WD)
  • Not compatible with 5-lug Tacomas
  • Designed to pair with OME Nitrocharger shocks (90000 series or equivalent)

Available Coil Options

All coils are sold in pairs. Choose the correct spring rate for your Tacoma setup:

  • OME 883 (ARB 2883): Approx. 1.5 inch lift. Ideal for trucks with no added front weight. Works as a leveling coil.
  • OME 884 (ARB 2884): For standard and extended cab models. Slightly firmer rate than 883.
  • OME 885 (ARB 2885): For Double Cab models or Tacomas carrying moderate added weight. Not recommended for stock shocks.
  • OME 886 (ARB 2886): Heavy-duty coils for Tacomas with 200 lbs or more of added front weight (steel bumper, winch, skid plates). Not compatible with stock shocks.

Shock Compatibility

For best performance and proper ride quality, OME coils should be paired with Old Man Emu 90000 shocks or other OME Nitrocharger struts. Note: 2885 and 2886 coils will NOT work with factory Toyota shocks.

Why Choose OME Coils?

  • Designed specifically for Tacoma load ranges and cabin configurations
  • Durable, shot-peened, and scragged for long service life
  • Excellent control on rough roads and off-pavement conditions
  • Consistent lift height under real-world loads

Important Fitment Note

Does NOT fit 5-lug Tacomas. Verify your truck uses the standard 6-lug suspension platform before ordering.

Frequently Asked Questions

Which coils are best for stock Tacomas?
OME 883 is best for no added weight and a mild, level stance.

Which coils should I use with a steel bumper or winch?
OME 886 for 200+ lbs added weight. OME 885 if weight is moderate.

Can I run 2885 or 2886 coils on stock shocks?
No. They require OME 90000 series shocks.

How much lift will I actually get?
Expect around 1.5 inches on 883, increasing slightly with higher spring rates and additional load.

Customer reviews

Rated 5 out of 5 stars
6 reviews
5 stars 6 100 %
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

6 reviews for Front OME 2883, 2884, 2885, 2886 Coils 2005-2015 Toyota Tacoma

Add a review

Use one of the allowed file type: jpg,png,jpeg.

    Questions and answers of the customers

      I have 2007 Tacoma Prerunner Access Cab V6 6ft long bed with stock front bumper nothing added 2” lift measured from hub to fender, I wondering which best 884 or 885 for my Prerunner that do pulling trailers like with 2 atvs or 18 ft boat or light Rv trailer and also I do carry work tools equipment etc in the back of bed. I expected to make my Prerunner ride smooth like butter on daily driver or light off-road. Which one I should get 884 or 885?
    1. 0 votes
      Q I have 2007 Tacoma Prerunner Access Cab V6 6ft long bed with stock front bumper nothing added 2” ...... Read more
      A We advise you to choose 2884 because the front spring is designed for a truck without additional weight. Spring 2885 is a stiffer spring designed for a heavier bumper
      2. Hello, I have a 2012 Tacoma Crew Cab v6 4x4 with 6' bed & factory tow option (6500lbs). I added a Dv8 front bumper and Harbor Freight 12k winch, estimated 4-500lbs of weight up front. Originally the OEM ride has no real lift to speak of. I have 5100's on front and rear already. I need between OEM & 2" ride height to keep the camper we occasionally pull level. Would the OME-T885 or 6's be a better choice? Also is there a rear helper leaf / spring option to pair the front coils? Thank you for your time.
    2. 0 votes
      Q Hello, I have a 2012 Tacoma Crew Cab v6 4x4 with 6' bed & factory tow option (6500lbs). I add...... Read more
      A 885 will feel softer, if carrying rood rack and additional stuff - 886 will be better
      3. I need to level my 2012 tacoma prerunner 4X2 after installing an iron cross bumper and winch. I have a pair of BS 5100 adjustable struts that I haven’t installed yet. Is there a heavier coil spring with factory measurements that will work with these struts and accomplish what I need.
    3. 0 votes
      Q I need to level my 2012 tacoma prerunner 4X2 after installing an iron cross bumper and winch. I h...... Read more
      A There is no such spring, but you can use the OME-T885 with B8 5100 adjustable struts, but only the shock ring should be in the lowest position Installation Instructions https://productdesk.cart.bilsteinus.com//media/products/bilstein/E4-WM5-Y323A00.pdf
      4. I have a 2012 double cab, 4wd, TRD sport. I want to accomplish 2.5-3" of lift and will be eventually getting an ARB bumper and possibly winch. I know I will need the 886 coils and 9000 shocks, but what else is required to accomplish this? Also, is it ok to have on there for a while without the ARB and winch?
    4. 0 votes
      Q I have a 2012 double cab, 4wd, TRD sport. I want to accomplish 2.5-3" of lift and will be eventua...... Read more
      A front 886 will be good, you can use them without added weight but the ride will fit stiffer. rear add a leafs will be recommended
      A I have a 2014 Toyota Tacoma, double Cab, 4 WD , TRD Sport. I added the 886 Coils and 5100 shocks to compensate for my new front bumper (https://bumperstock.com/collections/steelcraft-toyota-tacoma-front-bumpers/products/steelcraft-70-13370-toyota-tacoma-2005-2015-hd-elevation-bullnose-front-bumper-winch-ready) and winch (https://www.roughcountry.com/pro-series-electric-winch-pro9500s.html). I went with the rope winch to save about 100 pounds on the front. I still achieved 3 inch lift. Without the bumper and winch weight, the front is going to be really lifted. I then added 5100 shocks and https://www.toyteclifts.com/tac-al-toytec-rear-add-a-leafs.html. This leveled the rear end and gave it a smoother ride. The alignment worked out also. Planning is the key.
      5. I have a 2008 tacoma trd double cab long bed And im purchasing the bilstein 5100 with ome 2inch rear leaf . Now my question is what spring can i use the get the 3 inch lift that i want ? The 5100 only gives me 2.5
    5. 0 votes
      Q I have a 2008 tacoma trd double cab long bed And im purchasing the bilstein 5100 with ome 2inch ...... Read more
      There are no answers for this question yet.
      6. And ome 884 work with the bilstein 5100’s
    6. 0 votes
      Q And ome 884 work with the bilstein 5100’s
      A officially they are for OME shocks but they can work on the lowest notch adjustment
      7. So the weight of the 4cyl vs v6 Doesn’t Make any difference in the night the spring make?
    7. 0 votes
      Q So the weight of the 4cyl vs v6 Doesn’t Make any difference in the night the spring make?
      A In this case, the type of body and additional constant weight are important. The engine type does not have such a strong effect on the spring force OME-T884 coils for std and x cab models OME-T885 coils for D cab and additional weight. OME-T886 coils for 200+ lbs front weight from aftermarket bumper or winch
      8. I have a 2008 Tacoma 4cyl xtra cab with 5100’s how much lift wil the 883 give me and 884s ?
    8. 0 votes
      Q I have a 2008 Tacoma 4cyl xtra cab with 5100’s how much lift wil the 883 give me and 884s ?
      A OME 883:  375mm in height, 590 pound spring rate - 1,5" OME 884:  390mm in height 590 pound spring rate - 2.0"
      9. 2015 Double cab 4x2 V6 stock weight. Currently have 5100s on lowest perch with some 2 inch lift coils. Id like to keep ~2 inches and not go above 2.5 inch of lift. Ride is a bit stiff for my liking so Im looking for some replacement coils and would rather use the perchs on my 5100s to help lift. Are there any coils that I can use in combination with setting the 5100s on the perchs to give me this amount of lift?
    9. 0 votes
      Q 2015 Double cab 4x2 V6 stock weight. Currently have 5100s on lowest perch with some 2 inch lift c...... Read more
      A use 5100s on the lowest notch with lift coils please if you don't have additional constant load such as aftermarket bumper or winch
      10. I have 2014 tacoma Prerunner 4x2. I am going to buy 5100 shocks to install. My question is, with the 5100 series shocks installed, are new coils required also? Will the stock coils fit just fine even with the longer shocks installed? Current OE coils are not degraded at all.
    10. 0 votes
      Q I have 2014 tacoma Prerunner 4x2. I am going to buy 5100 shocks to install. My question is, with ...... Read more
      A You can keep your OEM coils and get up to 2.5'' of front lift using shocks height adjustment
      11. Can I run the 2885s with Bilstein 5100 on a sequoia 2005 first gen without any mods or extra parts. Will they fit on sequoia stock top strut plate and rubber?
    11. 0 votes
      Q Can I run the 2885s with Bilstein 5100 on a sequoia 2005 first gen without any mods or extra part...... Read more
      There are no answers for this question yet.
      12. Can I run 884s or 885s with a zone 6 inch lift and blisten 5100s set at 0
    12. 0 votes
      Q Can I run 884s or 885s with a zone 6 inch lift and blisten 5100s set at 0
      There are no answers for this question yet.
      13. Can I run 884s or 885s on top of a Zone 6 inch suspension lift plus blisten 5100s set at 0?
    13. 0 votes
      Q Can I run 884s or 885s on top of a Zone 6 inch suspension lift plus blisten 5100s set at 0?
      There are no answers for this question yet.
      14. would I be good with OME 885 for a 5th gen 4runner without extra load? for front? and is it 2" with 885 or 3" on the lowest notch bilstein 5100
    14. 0 votes
      Q would I be good with OME 885 for a 5th gen 4runner without extra load? for front? and is it 2" wi...... Read more
      A 885 will be good they will give 2,5'' of front lift on the lowest notch adjustment. Higher notches are not recommended - will overlift the vehicle
      15. Will these fit on a 2017 Tacoma Trd off road?
    15. 0 votes
      Q Will these fit on a 2017 Tacoma Trd off road?
      A Hello No For 2017 Tacoma we can offer OME 2″ FRONT LIFT COILS https://www.suspensionlifts.com/shop/toyota-tacoma/2016-and-up/front-lifts-2/ome-2-inch-front-lift-coils-for-2016-2017-toyota-tacoma/ IF you have front 5100 shocks (Part Number:24-263108 Notes:-Front Lift Height: 0-2") then these coils (OME 2″ FRONT LIFT COILS) will fit (SKU: OME-16)
      16. I have a 2010 4Runner Trail Edition with KDSS and I have Bilstein 5100’s front one are set in middle setting. If I buy OME 885 for front and OME 889 for rear how much lift will I get @middle setting on front Bilstein shocks. Also do I need diff drop after doing this.
    16. 0 votes
      Q I have a 2010 4Runner Trail Edition with KDSS and I have Bilstein 5100’s front one are set in mid...... Read more
      There are no answers for this question yet.
      17. On a 2018 4runner trd off road, can I use OME 884 coils with stock shocks?
    17. 0 votes
      Q On a 2018 4runner trd off road, can I use OME 884 coils with stock shocks?
      A Front Coil Springs: Used alone as leveling coils (approx. 1 1/2″)
      18. I have a 4door short bed 4x4 I'm getting 4600 what coil is recommended? Please help thx
    18. 0 votes
      Q I have a 4door short bed 4x4 I'm getting 4600 what coil is recommended? Please help thx
      A Hello The standard coils should fit your new 4600 shocks These are coils that are used for lifting. OME-T883 Front Coil Springs: Used alone as leveling coils (approx. 1 1/2″) OME-T884 coils for std and x cab models (Add Top Plate Spacers for 3″ of lift) OME-T885 coils for D cab and additional weight. (Add Top Plate Spacers for 3″ of lift) OME-T886 coils for 200+ lbs front weight from aftermarket bumper or winch
      19. Hello, I have 5100 going on my 2016 Taco with 886 springs (bumper and winch), a number of the answer say the "on the lowest notch adjustment you'll get 1.5'' of front lift. On the second notch adjustment, you'll get about 2.8-3'' of front lift depending on your front weight." That second notch adjustment, is that the second highest notch or the second lowest notch? I'm looking for about a 3" lift on the front.
    19. 0 votes
      Q Hello, I have 5100 going on my 2016 Taco with 886 springs (bumper and winch), a number of the ans...... Read more
      A For 883 coils 2nd notch from the bottom is used. For 886 coils you are to use the lowest notch adjusment
      20. how many inches of lift does the 886 springs with bilstein 5100 shocks at stock setting if i have a bumper(100 lbs) and a winch of (70lbs) give? for an 07 tacoma V6. i also have a 2” block in the rear
    20. 0 votes
      Q how many inches of lift does the 886 springs with bilstein 5100 shocks at stock setting if i have...... Read more
      A OME-T886 coils will give 3'' of lift for 200+ lbs front weight from aftermarket bumper or winch
      21. on my 07 tacoma V6, the 883 springs gave an extra inch &with 5100's another extra inch on stock setting and the front is higher than the rear.(not leveled) the rear i have a 2" block and the front is still higher,(i dont like how you can see the shock and everything else near the shock looking from the side of the car). in the future i plan to add a bumper that weighs 100 pounds and a winch that weighs 70 pounds. if i use 886 springs will it raise my car even higher than it is now with 883 coils on stock setting with bilstein 5100's?
    21. 0 votes
      Q on my 07 tacoma V6, the 883 springs gave an extra inch &with 5100's another extra inch on sto...... Read more
      A Hello, in order to figure out how much lift you need to level please take existing measurements from center of the wheel hub to the bottom of the fender. Difference between front and rear is how much lift you need to level. http://prntscr.com/gfgxwt If you plan to put a heavy bumper 100 pounds and a 70 pound winch, then you definitely need to use 886 coils. 885 will not work because they are designed for 110-120 pounds. Maybe you should set up a clip on the 5100 shock a little lower, we understand you have adjustable shocks? We send you instructions
      22. how many inches of lift does 884,885,886 give and how much is the weigh capacity for those three springs
    22. 0 votes
      Q how many inches of lift does 884,885,886 give and how much is the weigh capacity for those three ...... Read more
      A OME-T883 Front Coil Springs: Used alone as leveling coils (approx. 1 1/2″) for 2005-2015 Toyota Tacoma OME-T884 coils for std and x cab models (Add Top Plate Spacers for 3″ of lift) OME-T885 coils for D cab and additional weight. (Add Top Plate Spacers for 3″ of lift) OME-T886 coils for 200+ lbs front weight from aftermarket bumper or winch
      23. i have an 07 tacoma v6 prerunner, if i put an armored bumper that weighs 100 pounds and a winch that weighs 46 pounds, would i still have to use the 886 coils on many tacoma when the 886 description says it’s for 200+ pounds?
    23. 0 votes
      Q i have an 07 tacoma v6 prerunner, if i put an armored bumper that weighs 100 pounds and a winch t...... Read more
      A Hello You are going to use a heavy bumper and winch, the total weight will be somewhere between 150-160 pounds + you have a B6 engine. Coils 885 is designed about 110-120 pounds. We would advise you to put 886 coils otherwise you may not get the desired lift
      24. I ordered 884s and they arrived today. There are no instructions in the box. There are no right side/ left side markings. I feel like they should be marked is this true? If so, how do you tell?
    24. 0 votes
      Q I ordered 884s and they arrived today. There are no instructions in the box. There are no right s...... Read more
      There are no answers for this question yet.
      25. I have a 2008 tacoma 4.0 4x4 and my struts and shocks need to be replaced. I want to maintain the original ride height, what do I need? All these numbers are confusing.
    25. 0 votes
      Q I have a 2008 tacoma 4.0 4x4 and my struts and shocks need to be replaced. I want to maintain the...... Read more
      A Hello If you want to keep the original ride height, you can use Front OME 883 These coils springs used alone as leveling coils (approx. 1 1/2″) for 2005-2015 Toyota Tacoma However if you use a heavy bumper or a winch on your truck, then you need tough coils OME-T884 coils for std and x cab models (Add Top Plate Spacers for 3″ of lift) OME-T885 coils for D cab and additional weight. (Add Top Plate Spacers for 3″ of lift) OME-T886 coils for 200+ lbs front weight from aftermarket bumper or winch
      26. if i were to get the 883 springs with bilstein 5100. and the springs give me an extra 1.5", what adjustment height (line) is the 1" mark on the shock? and im having 2" blocks in the rear. if theres a diagram of how much inches of lift each line gives , can it also be provided to me
    26. 0 votes
      Q if i were to get the 883 springs with bilstein 5100. and the springs give me an extra 1.5", what ...... Read more
      A on the lowest notch adjustment you'll get 1.5'' of front lift. On the second notch adjustment you'll get about 2.8-3'' of front lift depending on your front weight. It is not recommended to have more then 3'' of lift
      27. i want to get bilstein 5100 with 883 springs and 2" rear blocks. on what setting will i have to put the front shocks to be leveled with the 2" rear blocks? (p.s. i have 4 leaf springs.)
    27. 0 votes
      Q i want to get bilstein 5100 with 883 springs and 2" rear blocks. on what setting will i have to p...... Read more
      A Hello, in order to figure out how much lift you need to level please take existing measurements from center of the wheel hub to the bottom of the fender. Difference between front and rear is how much lift you need to level. https://prntscr.com/gfgxwt From our experience rear is 2'' higher then the front from the factory, so adding 2'' rear blocks will no allow to level the truck. 883 coils will give you about 1.5'' front lift by themselves. Also you may get additional 1.5'' of frnt lift by using 2nd notch adjustment on the front 5100 shocks. Having more then 3'' of front lift is not recommended - can be harmful for the suspension. So to have the truck leveled you may lift the front by 3'' and rear - by 1'-1.5'' from stock Diff drop kit is recommended for 4WD trucks for 1.5'' of front  lift and more to increase the CV axles life.  
      28. Can I use the 885 coils with bilstein 5100 and only get one inch of lift? I have a double cab shortbed, I currently have maxtrac spindles and am looking to raise the front only 1 inch and replace the stock coils/shocks. Thank you
    28. 0 votes
      Q Can I use the 885 coils with bilstein 5100 and only get one inch of lift? I have a double cab sho...... Read more
      A 886 coils will give you 3'' 883 will give about 1,5'' It's not recommended to stack lifts
      29. Have a 2018 Tacoma TRD Offroad. I'm looking to level it. Can i use the B 5100's on 1.55 setting with stock coils? Or should I get new 884/885 coils and leave B 5100's at 0? Also, anything need to be done to the rear and/or rear diff drop kit needed on either of those options?
    29. 0 votes
      Q Have a 2018 Tacoma TRD Offroad. I'm looking to level it. Can i use the B 5100's on 1.55 setting w...... Read more
      A Yes, 5100 can be used on middle settings with stock coils for 1,5'' if you don't have additional weight such as aftermarket bumper or winch. 883 coils can be used for leveling with 5100s on lowest setting
      30. I have a fabtech basic 6” lift on a 2007 tacoma dclb, can I use these coils on bilstein 5100 shocks, I have a aftermarket bumper and winch?
    30. 0 votes
      Q I have a fabtech basic 6” lift on a 2007 tacoma dclb, can I use these coils on bilstein 5100 shoc...... Read more
      A These coils may fit but it is strictly not recommended to stack lifts - can be harmful for the suspension and ride safety
      31. I am planning on installing 5100 @ 1.75 in my 2005 tacoma prerunner x-cab to level it. If i replace the worn factory springs with 884 would i need to adjust (lower) the setting on the 5100's to achieve the same lift height using old springs?
    31. 0 votes
      Q I am planning on installing 5100 @ 1.75 in my 2005 tacoma prerunner x-cab to level it. If i repla...... Read more
      A 884 coils will give you 2,5'' of lift on the lowest notch adjustment. Please consider 883 coils on the lowest notch adjustment if you want to have 1,6-1,7'' of front lift https://suspensionlifts.com/shop/toyota-tacoma/2005-2015/front-lifts-and-coilovers/front-ome-883-884-885-886-coils-2005-2016-toyota-tacoma/
      32. 2017 taco OR,currently running bilstein 5100 highest setting with stock coilover.i just added a plate bumper with 150 lbs of weight added. with one u recomend to use for the added weight? I was thinking of getting the 700lbs heavy duty but I dont want a stiff ride
    32. 0 votes
      Q 2017 taco OR,currently running bilstein 5100 highest setting with stock coilover.i just added a p...... Read more
      A If only bumper without winch then 886 coils will be good and Bilsteins set on 2nd notch will give you about 2,5-3'' of lift
      33. I have a single cab, 4 cylinder, 4x4, with 5100's and 886....also a plate bumper(looking for winch later). My ride seem stiff and not much "bounce" in the front. My cv Alex's look too angled also. Did I get the wrong springs? Should it be 885's ?!?!. I need help quick!!
    33. 0 votes
      Q I have a single cab, 4 cylinder, 4x4, with 5100's and 886....also a plate bumper(looking for winc...... Read more
      A OME-T886 coils are recommended for 200+ lbs front weight from aftermarket bumper or winch. If you plan to install winch and carry additional weight - these coils may be kept, and diff drop kit will help to correct the axles angles https://suspensionlifts.com/shop/toyota-fj-cruiser/toyota-fj-cruiser-2010-2011-2012-2013/front-lifts/front-differential-drop-kit/
      34. I have a 2015 AC 2wd and I currently run a full OME setup with 883s, 1/2" top spacers, OME shocks, and Dakars. When first installed I did not know the amount of rake I would be getting. Now I would like to raise and level the front. Would 884s with the 1/2" top spacer maximize my front end to get ~3" of lift or just the 884s alone?
    34. 0 votes
      Q I have a 2015 AC 2wd and I currently run a full OME setup with 883s, 1/2" top spacers, OME shocks...... Read more
      A The coils differ for the additional weight they are designed for, not for their length. The top spacer is needed to reach 3'' of lift - will be slightly less without a spacer. You are right choosing 884 coils if you don't have any additional weight on the front such as aftermarket reinforced bumper or winch.
      35. Hey, I currently have bilstein 5100s set at 1.25 on 09 access cab. I'm thinking about getting the US offroad bumper/winch. What springs would you recommend for a 3" lift?
    35. 0 votes
      Q Hey, I currently have bilstein 5100s set at 1.25 on 09 access cab. I'm thinking about getting the...... Read more
      A Ideally adjustable coilovers, but these would probably work fine: https://suspensionlifts.com/shop/toyota-fj-cruiser/toyota-fj-cruiser-2010-2011-2012-2013/front-lifts/toytec-eibach-front-coil-lift-springs/
      36.  Do the 885 level the front and hold additional weight on a double cab? If used with Bilstein adjustable shocks would I run the shock at stock height?
    36. 0 votes
      Q  Do the 885 level the front and hold additional weight on a double cab? If used with Bilstein adj...... Read more
      There are no answers for this question yet.
      37. I have a 2015 Tacoma 4x4. I am going to run the Bilstein 5100 adjustable shocks with new coils. I want to level the front. Later I want to install a 65 pound aluminum bumper and a winch. I want to make sure the front stays level after the later installs. What coil springs should I run to level and later hold the weight? Thank you
    37. 0 votes
      Q I have a 2015 Tacoma 4x4. I am going to run the Bilstein 5100 adjustable shocks with new coils. I...... Read more
      A Do the 885 level the front and hold additional weight on a double cab? If used with Bilstein adjustable shocks would I run the shock at stock height?
      38. Does the Front OME 883, 884, 885, 886 Coils 2005-2016 Toyota Tacoma, what's the difference from the light med and heavy and I'll it fit my stock tacoma without lifting it?
    38. 0 votes
      Q Does the Front OME 883, 884, 885, 886 Coils 2005-2016 Toyota Tacoma, what's the difference from t...... Read more
      A

      The difference it these coils is the weight needed to collapse them. The size 9uncollapsed length) is the same

       

      • OME-T884 coils are for std and x cab models - they have the lightest weight on the front (Add Top Plate Spacers for 3″ of lift)
      • OME-T885 coils for D cab and additional weight - these are medium coils. (Add Top Plate Spacers for 3″ of lift)
      • OME-T886 coils for carryimg 200+ lbs front weight from aftermarket bumper or winch. Can be called heavy duty coils.
      39. where can i find coil springs for my 2005 toyota tundra double cab?
    39. 0 votes
      Q where can i find coil springs for my 2005 toyota tundra double cab?
      A The 883. 884. 885. 886 coils will fit the 2005 Tundra - please choose the one you need from the dropdown. Please see https://www.tundrasolutions.com/forums/lifting/133157-yalt-average-lift-out-ome-coils/ for additional info
      40. Im not trying to lift, only level my DCLB Tacoma. Will the 883s be enough? or should I go with the 884s because of the extra front end weight of the Double Cab vs the Reg cab/Ext Cab?
    40. 0 votes
      Q Im not trying to lift, only level my DCLB Tacoma. Will the 883s be enough? or should I go with th...... Read more
      A Please take measurements from the ground to the top fender line of the front and read fenders. If you need only 1'' of front lift for leveling then please 883 coils for your Double Cab. If you need 1.5-2'' of lift for leveling the front end - the 884 springs will be better.
      41. Can you assemble the coils and shocks(90021) in house and ship them to me for easy install?
    41. 0 votes
      Q Can you assemble the coils and shocks(90021) in house and ship them to me for easy install?
      A Unfortunately we can't assemble it.
      42. Have a double cab short bed I want 3 inch lift will be putting on front bumper with winch also skid plates and rear bumper I carry weight for work and also want to use the truck for over landing what do you recommend?
    42. 0 votes
      Q Have a double cab short bed I want 3 inch lift will be putting on front bumper with winch also sk...... Read more
      A 886 Coils will be the best for carrying 200+ lbs of additional front weight. 885 will give you a softer ride and can be recommended if you don't carry much weight in the cabin.
      43. Hi there, I have Bilstein 5100s with stock springs on my truck currently. They are on the highest setting for around 2.5" of lift I believe. I want to buy some new 5100s as I like these shocks, and in wondering which OME springs I should buy off you to create the same lift. I have a stock bumper and no winch. Would the best option be 884s on the lowest setting on the shock? Thanks
    43. 0 votes
      Q Hi there, I have Bilstein 5100s with stock springs on my truck currently. They are on the highest...... Read more
      A Thank you for the details provided. All the springs - 884 885 886 - provide the equal lift height (about 3'' lift each). The difference in them is how comfortable the offoading will be with them. The toughness of the springs is different - they are designed for different weight. OME-T884 coils for std and x cab models (Add Top Plate Spacers for 3″ of lift) OME-T885 coils for D cab and additional weight. (Add Top Plate Spacers for 3″ of lift) OME-T886 coils for 200+ lbs front weight from aftermarket bumper or winch. So no matter 884 or 885 or 886 you choose your lift will be about 2,5'' . If you don't have a bumper and a winch and don.t carry much stuff please choose 884, if you have a double cab and carry additional weight - you may like 885.
      44. Does adding the top plate spacer stiffen the ride? If I am use the 885 for my d cab, what setting do I put the 5100 at? Will adding the spacer give me at least 2.75"?
    44. 0 votes
      Q Does adding the top plate spacer stiffen the ride? If I am use the 885 for my d cab, what setting...... Read more
      A OME-T885 coils are designed for D cab and additional weight. Adding Top Plate Spacers may give you even 3″ of lift - so please do it carefully, because more lift can make the ride not so good and affect suspension life.
      45. Do you carry the top plate spacers?
    45. 0 votes
      Q Do you carry the top plate spacers?
      A

      Yes, ToyTec Front Top Plate 3/4″ Spacer Kit
      46. I have the one full kit with dakars and 885 coils with top plate spacers. If I upgrade to the 886 for steel bumper and winch can I still add top plate spacers to keep my 3 inch lift up front? I know the 886 are taller then the 885 but I don't want to sag lower then 3 inch so I don't rub
    46. 0 votes
      Q I have the one full kit with dakars and 885 coils with top plate spacers. If I upgrade to the 886...... Read more
      A 886's are 656 #/in and are made to give you close to 3" of lift with 200+ lbs hanging off the front end (ARB bumper with a winch). Unless you're really putting a lot of weight up front, I wouldn't recommend the 886's. If you do go with them, I'd get the Nitrochargers instead of the 5100's. They seem to be a better match.
      47. What size spacers does this kit use??
    47. 0 votes
      Q What size spacers does this kit use??
      A

      These coils do not come with spacers, but the top plate spacer option provides approximately 1/2" to 3/4" lift.

    ATTENTION STATE OF CALIFORNIA CONSUMERS. WARNING: Cancer and reproductive harm – www.p65warnings.ca.gov

    Related products

    Price: $249.95

    In stock

    In stock

    Share (1)
    Total: 0 Total: 0 Total: 0 Total: 1