ICON S2 Secondary Shock System – Stage 3 for 2005-2015 Toyota Tacoma

Description
ICON S2 Secondary Shock System – Stage 3 for 2005-2015 Toyota Tacoma

ICON Stage 3 S2 Secondary Shock Kit 0-3.5 inches Lift for 2003–2015 Toyota Tacoma/4Runner/FJ Cruiser

Part Number: K53113

Summary: The ICON Stage 3 S2 Secondary Shock System is a high-performance modular upgrade designed for the 2005–2015 Toyota Tacoma, 2003–2009 Toyota 4Runner, and 2007–2009 Toyota FJ Cruiser. This system effectively doubles the front damping ability by adding a secondary 2.5 Omega Series Two-Tube Bypass shock to an existing coilover setup, allowing the vehicle to tackle aggressive off-road obstacles with superior control. This kit utilizes a bolt-on shock hoop and a weld-on lower control arm skid plate to maintain factory track width while providing professional-grade bypass adjustability.

Features

• Secondary Damping: 2.5 Omega Series Two-Tube Bypass shocks provide adjustable compression and rebound damping to effectively double the suspension’s energy absorption capacity.
• S2 Modular Design: A vehicle-specific shock hoop and lower control arm skid plate provide a mounting solution for secondary shocks to ensure increased stability and oil volume without the need for expensive long-travel kits.
• System Durability: Impact extruded aluminum cylinders and a mostly bolt-on architecture provide excellent corrosion resistance and structural integrity to ensure long-term performance in harsh environments.
• Installation: Direct fitment components with required welding on the lower control arm provide a secure, high-strength mounting point to ensure the system handles extreme off-road loads.

Technical Specifications

Wheel & Tire Fitment

• OEM Wheels & Tires: Yes
• Aftermarket Wheels: 17×8.5 with 4.75” Backspace / 0mm Offset, 18×9 with 5.00” Backspace / 0mm Offset, or 20×9 with 5.00” Backspace / 0mm Offset
• Aftermarket Tires: 33 inches x 11.50 inches
• Note: Larger tires may fit but fender trimming and modifications will be required. Maximum steering angle is reduced for secondary shock compatibility. Not compatible with KDSS equipped GX470s or TRD Big Brake Kits. Not recommended for use with remote reservoir coilovers.

System Components

• 56101 (qty: 1) | 07-09 FJ/03-09 4RUNNER /05-15 TACOMA LCA SKID PLATE KIT
• 56102 (qty: 1) | 07-14 FJ/03-24 4RUNNER/05-23 TACOMA S2 SHOCK HOOP KIT
• 59906P (qty: 1) | S2 FRONT 2.5 OMEGA RR PAIR

Why Choose ICON Stage 3?

• Performance Engineering: Increased wheel travel and damping for superior control.
• Bypass Adjustability: Omega Series shocks allow for fine-tuning of both compression and rebound to match specific terrain.
• Fully Serviceable: Shocks are rebuildable and revalveable for long-term performance.

Frequently Asked Questions

Is welding required for this installation?
Yes, welding is required on the factory lower control arm to install the S2 skid plate and shock mounting tabs.

Can I use this kit with my factory wheels?
Yes, this system is compatible with OEM wheels and tires, though specific aftermarket backspacing is recommended for larger tires.