Generic filters
Exact matches only
Archives

on

IRONMAN Front Shocks for 2005-2015 Toyota Tacoma

Part Number 12710GR

IRONMAN Front Nitro-Gas Shocks

Fits Toyota 4Runner 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

  • Exceptional performance for both standard and raised height 4×4’s
  • Superior ride control and comfort both on and off road
  • Improve stability when towing or carrying a load
Priced as a pair (2) Front Shocks
Ironman 35mm (1.378) bore Nitro Gas Shocks are the rugged all year round best performing shock. Ironman Nitro Gas Shocks provide exceptional performance for both OEM height and lifted 4×4Â’s whilst delivering superior ride control and comfort both on and off road, with increased stability when towing or carrying a load.
nitrogas2 35mm (1.378) Shock Body & Piston
Larger than OEM shocks, with increased oil capacity and larger valve surface area Ironman 4×4’s Nitro Gas Shocks provide an all round increase in ride quality. Matched with a 54mm outer body, available for all makes and models.
nitrogas2b 15mm (.59) Piston Rod
Volumetrically matched to the 35mm (1.378) piston and shock body, provides maximum strength without taking up extra space.
The shock pistons are double chrome hardened to resist damage by scratches and impact.
nitrogas2c Multi-Lip Hi Temp Seal
A feature of all Ironman 4×4 Nitro Gas Shock Absorbers High quality NOK seal features 4 blades to lock in the oil and gas while keeping dust/dirt/mud from entering into the shock.
nitrogas2d Nitrogen Gas Charged
A low pressure shot of Nitrogen Gas is compressed and contained within the Shock Absorber chambers, this pressurizes the oil molecules and helps prevent cavitation, which is commonly refered to as shock fade.
nitrogas2e Nitro Gas Struts
For 4×4 vehicles with IFS (Independent Front Suspension) systems, Ironman 4×4 Struts incorporate all the features of the Nitro Gas version, with the added feature of adding the height adjusting collar ring system.
1547

on

ICON 1.5″ Lift Rear Expansion Pack Add a Leaf for 2000, 2001, 2002, 2003, 2004, 2005, 2006 Toyota Tundra

Part: 51100

Overview:

This 3 Leaf Progressive Add a Leaf Kit comes complete with U-bolts and Center pins for an easy install. This add a leaf kit will give your Tacoma / Tundra 1.5″ of lift after installation. Just remove the factory overload and say good bye to that rough factory ride.

13248

on

ICON 1.5″ Rear Lift Expansion Pack Add-A-Leaf for 1995-2023 Toyota Tacoma

Part: 51100
Includes: 2 add-a-leaf springs, 4 U-bolts, center pins, and installation hardware

The ICON 1.5 inch rear lift expansion pack add-a-leaf is designed to improve rear ride quality, restore load support, and add a mild rear lift to Toyota Tacomas running factory leaf packs. This progressive add-a-leaf system increases spring rate in a controlled manner without creating the harsh ride commonly associated with stiff factory overload leaves.

By removing the factory overload leaf and replacing it with ICON’s progressive add-a-leaf, this kit delivers a smoother ride on pavement, better compliance off-road, and improved rear suspension control when carrying light loads.

Lift Height and Ride Characteristics

  • Provides approximately 1.5 inches of rear lift
  • Progressive spring rate improves ride comfort over stock
  • Reduces harshness caused by the factory overload leaf
  • Improves rear suspension control under light to moderate load

Note: Actual lift height may vary depending on vehicle condition, factory spring wear, and added rear weight.

Kit Design and Installation

This expansion pack uses a progressive three-leaf configuration designed to work with the factory leaf pack once the OE overload leaf is removed. The included U-bolts and center pins make this a complete, bolt-on solution.

  • Progressive add-a-leaf design for smoother ride quality
  • Complete kit with new U-bolts and hardware
  • Direct bolt-on installation
  • No welding or fabrication required

Fitment

  • 1995-2023 Toyota Tacoma

Important: This kit is designed for Tacoma applications only. Always verify leaf pack condition before installation.

Installation Video

Below is a customer-submitted installation video showing the add-a-leaf install process:

Frequently Asked Questions

Does this kit require removing the factory overload leaf?
Yes. The factory overload leaf is removed to improve ride quality and allow the progressive add-a-leaf to function properly.

Will this make the ride stiffer?
No. The progressive add-a-leaf typically rides smoother than the factory overload while improving control.

Does this kit include U-bolts?
Yes. New U-bolts and installation hardware are included.

Is an alignment required after installation?
No. Rear add-a-leaf installation does not affect front wheel alignment.


109237