Your cart is currently empty!
Bilstein 5100 Height Adjustable 0-2.5″ Front Lift Shocks for 2005-2015 Toyota Tacoma
Description
Bilstein 5100 Height Adjustable 0-2.5″ Front Lift Shocks for 2005-2015 Toyota Tacoma
Bilstein 5100 Height Adjustable 0-2.5″ Front Lift Shocks for 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 Toyota Tacoma
Part: 2×24-324359 (old: 24-239370)
Need a full front rear kit?
Includes: 2 Shocks
- Extended Length (IN): 22.56 Inch
- Compressed Length (IN): 17.03 Inch
- Upper Mounting Style: Stud
- Lower Mounting Style: Eyelet
Features:
- Bilstein Zinc plated front shocks.
- Nitrogen charged gas shock.
- 4 lower spring cup clip positions allow the front to be lifted for leveling up to 2.5″.
- Improved ride & control on/off road.
- Bilstein Quality & limited lifetime warranty.
NOT RECOMMENDED FOR USE WITH SPACERS OR LIFT COILS UNLESS LOWEST (STOCK) SETTING IS USED.
Includes 2 Shocks
Questions and answers of the customers
-
Are these the replacement shocks for the TTAFCS-129 - Toytec Ultimate Coilovers (05-15 Tacoma, 03-09 4Runner, 07-09 FJ?
- QAre these the replacement shocks for the TTAFCS-129 - Toytec Ultimate Coilovers (05-15 Tacoma, 03...... Read moreThere are no answers for this question yet. Answer now2008 4Runner SR5 4x4 with 4.7 V8 - stock bumpers. Keeping the stock springs and stock rear shocks, what setting on the front will level the truck?
- Q2008 4Runner SR5 4x4 with 4.7 V8 - stock bumpers. Keeping the stock springs and stock rear shocks...... Read more answer nowA In order to figure out how much lift you need to level please take existing measurements from center of the wheel hub to the bottom of the fender. Difference between front and rear is how much lift you need to level. https://www.suspensionlifts.com/level.pngusually middle clip settingWill this fit a 2009 Toyota Tacoma pre-runner RWD?
- A yes, will fit 6-lug TacomaCan I use the OME 884x springs on the second perch from the bottom?
- A not recommended - will overlift the suspensionWhat is the best coil/spring to pair with these Bilstein 5100s in the front?
- A Position On Vehicle:Front; With 0 To 2-1/2 Inch Lift You can use a stock spring To get different lifting heights you need to rearrange the rings on shock2007 toyota 4 runner sr5 can I set the 5100 s to highest setting with the factory upper control arms ?
- Q2007 toyota 4 runner sr5 can I set the 5100 s to highest setting with the factory upper control a...... Read more answer nowA Here's a link to Installation Instructions https://productdesk.cart.bilsteinus.com//media/products/bilstein/E4-WM5-Y323A00.pdf No upper control arms replacement requiredHi , does it ships with original Bilstein packaging ? and does it contains the silver thick spring seats which I see on a photo or it comes with usual black spring seats?
thank you
- QHi , does it ships with original Bilstein packaging ? and does it contains the silver thick sprin...... Read more answer nowA comes in original packagingnow the include black spring seatsYou keep reiterating, "Please keep in mind, that not recommended to use with spacers or lift coils unless lowest settings are used. " Does this include a 1/4" Tacoma lean compensating spacer? I'm not intending to lift my Tacoma with this small spacer. What is the possible result if this small spacer is used in conjunction with the 5100 and stock spring? 2013 Tacoma Double Cab Sport.
- QYou keep reiterating, "Please keep in mind, that not recommended to use with spacers or lift coil...... Read moreThere are no answers for this question yet. Answer nowHi, will ironman coils work?
- QHi, will ironman coils work?There are no answers for this question yet. Answer nowwill these fit a 2007 sr5 4runner along with the 1.6-3” front coil springs?? I already have a 3” in the front and 2” in the back strut spacer but still isn’t leveled
- Qwill these fit a 2007 sr5 4runner along with the 1.6-3” front coil springs?? I already have a 3” ...... Read more answer nowA Hello what kind of drive is on your truck 4WD or RWD? Do you want to level the truck using shocks?A its a 2wd and i would actually to give it just a little squat in the rearA its a 2wd and id like to give it a little squat bht scared to just buy the.m coils because i dont wanna over extend my stock shocksAre the snap ring and spring seat included?
Also what is the recommended height for stock coils on 07 4Runner?
- QAre the snap ring and spring seat included? Also what is the recommended height for stock coils o...... Read more answer nowA Yes, they are included.lowest notch is for stock height, and highest - for 2.5''Will these help lift my 2011 4x4 extra cab ,for plow weight
- A Yes, they will fit, but we'd recommend lift coils together with these shocks for plow weightWhat is recommended for Tac 2014 TRD 4W DBL max 2-inch lift without stiffening the ride? Please provide exacts.
- QWhat is recommended for Tac 2014 TRD 4W DBL max 2-inch lift without stiffening the ride? Please p...... Read more answer nowA These shocks will be good with stock coils if you are running stock weight 9no additional constant load)I have a 2015 DBL cab Tacoma. If I use toytec coils with a 600lb spring rate, what setting should I put the C-clip at? I am unsure whether the previous answers were referring to the 620 or 600 Eibach springs. I was told by a technician at my local suspension shop that I should use the second setting on the C-clip with a 600lb Eibach coil, but I am unsure about it.
- QI have a 2015 DBL cab Tacoma. If I use toytec coils with a 600lb spring rate, what setting should...... Read more answer nowA You may use 2nd clip for leveling of 3rd clip for more heightDo these fit 2015 4Runner sr5?
- A These will fit * * * https://suspensionlifts.com/shop/toyota-4runner/2010-2018/shocks-2003-2012-toyota-4runner/front-0-2-5-adjustable-lift-shocks-2010-2016-toyota-4runnerfj-cruiser/My 09 Toy truck has a OME 3" lift with 885 coils. Can these coils be used with the adjustable 5100 shocks?
Thank you.
- QMy 09 Toy truck has a OME 3" lift with 885 coils. Can these coils be used with the adjustable 510...... Read more answer nowA They can be used with 5100s only on the lowest noch adjustment. Exceeding 3'' of total lift may damage the suspensionI have a 2007 tacoma dclb with shocks would give me more of a lift bilstein 5100 adjustabel shocks or 6112
- QI have a 2007 tacoma dclb with shocks would give me more of a lift bilstein 5100 adjustabel shock...... Read more answer nowA Both 5100 and 6112 will give you front lift.5100s are for regular ride, 6112 - are good for road and offroad rideI read in forums online that these shocks are compatible for the 03-09 Lexus GX470. can you verify this? if not whats your return policy?
- QI read in forums online that these shocks are compatible for the 03-09 Lexus GX470. can you verif...... Read more answer nowA We accept returns if in new unused conditions. We know that front shocks mountings on GX are the same as 4Runner if it does not have air or electronic leveling suspension.If you have coils and upper shocks mounting - Stem, lower shocks mountng - Loop then please send us your Lexus photos with these shocks installedWould these work for a 2017 Tacoma DCSB? If not what is recommended please? Thank you!
- A https://suspensionlifts.com/shop/toyota-tacoma/2016-and-up/shocks-2016-and-up/0-2-front-lift-bilstein-5100-shocks-2016-toyota-tacoma/ this is what you needA Will this fit 2017 tocoma off roadA Will this fit 2017 Tocoma off roadCan all the settings be used with stock springs?
- A Yes, exactly - the lowest setting is for stock height (using stock springs) and the highest setting will give you about 2.5'' of front liftIt looks like these have four positions for the spring perches to mount. If the lowest setting is stock height, and the highest is 2.5", what are the middle two heights?
- QIt looks like these have four positions for the spring perches to mount. If the lowest setting is...... Read more answer nowA about 1'' and 1.75''Will these fit a 2017 tacoma sr5?
- A No, but these will: https://suspensionlifts.com/shop/toyota-tacoma/2016-and-up/shocks-2016-and-up/0-2-front-lift-bilstein-5100-shocks-2016-toyota-tacoma/Will I need to buy new springs to go up to the 2.5in slot?
- A These are height adjusted shocks. The 4 lower spring cup clip positions allow the front to be lifted for leveling up to 2 1/2″ on your stock springs.Please keep in mind, that it is not recommended for use with spacers or lift coils unless lowest 9stocks) setting is used.Will I need swaybar relocation brackets with 5100's set on .85 on '15 tacoma trd off road access cab?
- QWill I need swaybar relocation brackets with 5100's set on .85 on '15 tacoma trd off road access ...... Read more answer nowA swaybar relocation not needed for your setupI have a 2015 tacoma access cab TRD off road. I read somewhere that I can't use the stock coils with the 5100's because of the coils being progressive. Is that true? Also what lift can I expect at .85 setting?
- QI have a 2015 tacoma access cab TRD off road. I read somewhere that I can't use the stock coils w...... Read more answer nowA You can use stock coils. At 0.85 setting you will get approximately 0.85" liftDo you sell bilstine 5100 ride height adjustable front struts for a 2007 GMC Sierra 1500 2wd Just the fronts only. I don't need the whole kit with the rear shocks. I had replaced the rear shocks already Couldent find a number to reach you guys at
- QDo you sell bilstine 5100 ride height adjustable front struts for a 2007 GMC Sierra 1500 2wd Just...... Read more answer nowA Hello. We have front Bilstein shocks for GMC Sierra 1500 2wd: -< for stock height or -< for For Front Lifted Height: 3" with a-arm style lift. But not ride adjustable. the shocks we have are with - Upper Mounting Style: Stem - Lower Mounting Style: Bar Pin. Do ypou have the same mountings? Can you take measurements of your old shocks extended length?2012 Tacoma trd off road access cab
Want to eliminate rake. 5100 adj to 2.5". Is this all I need without damage or stress on trk.
- Q2012 Tacoma trd off road access cab Want to eliminate rake. 5100 adj to 2.5". Is this all I need ...... Read more answer nowA Yes, that should be fine.Please keep in mind, that not recommended to use with spacers or lift coils unless lowest settings are used.NOTE: Upper bushings and washers are not included from Bilstein in this part number, order separately if needed.Please see the instruction before biying https://www.toyteclifts.com/images/stories/pdf_files/c475.pdfCan you ship them to Russia?
- A
Yes. Contact us for a quote.
10 reviews for Bilstein 5100 Height Adjustable 0-2.5″ Front Lift Shocks for 2005-2015 Toyota Tacoma